Plastic Door Track Assembly No. 3 for 1/4" Door 5' L, White
Description
Plastic Door Track Assembly No. 3 For 1/4 Inch Doors
Plastic Door Track Assembly No. 3 is a sliding door hardware kit from EPCO designed for 1/4 inch by-passing wood and/or glass doors, so it sets up a defined track and guide path for lightweight panels. The assembly is made from high impact, extruded polystyrene, which provides a rigid, shaped profile that resists everyday knocks in typical small-door use. This model is 5 feet long, giving you a single continuous run for shorter openings without needing joints along the track. The track and guide assembly is finished in white, so it visually blends with light-colored cabinet interiors or casework while keeping the working components unobtrusive. As part of EPCO sliding door hardware, it fits into standard builders hardware workflows where a compact, non-metal track is preferred for smaller door applications.
Key Sliding Door Track Details For Small Doors
- The assembly is specified for 1/4 inch by-passing wood and/or glass doors, so it fits door panels of that thickness and lets one door move in front of the other on a defined path.
- The track is made from high impact, extruded polystyrene, so the plastic profile keeps its shape under normal sliding loads and everyday operation in small door installations.
- The EPCO assembly is 5 feet long, so a single piece spans many cabinet or small closet openings and keeps the sliding motion consistent along the entire run.
- The track assembly is white, so it visually matches light interiors or trim and keeps the sliding hardware from drawing attention on finished work.
- The assembly is part of EPCO sliding door hardware, so it fits into a coordinated line of builders hardware when specifying components for by-passing door projects.
Sliding Door Track Fit And Mounting Considerations
This EPCO plastic door track assembly is built specifically around 1/4 inch by-passing doors, so the channel geometry is sized to guide panels of that thickness without excessive side play. The 5 foot length gives you predictable layout dimensions for shorter spans, since the track can run the full opening in one continuous piece. Because the track is high impact, extruded polystyrene, it maintains accurate edges and surfaces that the doors ride against, which helps the by-passing panels travel along a stable path over time. The white finish on the assembly supports clean-looking installations in cabinetry or light millwork where visible hardware needs a neutral appearance.
Using This EPCO Track Assembly In Sliding Projects
Where This Plastic Door Track Assembly Fits Best
This EPCO plastic door track assembly is designed for 1/4 inch by-passing wood and/or glass doors, which positions it well for small and/or light door applications called out in the description. In practice, the 5 foot long plastic track can span shorter cabinet or casework openings in one piece, supporting sliding motion without mid-span seams that might interrupt the door travel. Because the material is high impact, extruded polystyrene, it provides a molded channel suited to repeated sliding in lighter-duty door situations. The white color lets the track assembly sit in visually quiet backgrounds, such as white melamine interiors or painted shelving, so the functional parts remain discreet while the doors operate on a defined path.
Details That Support Smooth, Repeatable Sliding Results
The specified use with 1/4 inch by-passing doors means the EPCO door track assembly positions each panel on a predictable line, so the doors overlap correctly as they move. High impact, extruded polystyrene construction creates a stable profile, which helps the track maintain its shape and contact surfaces under regular sliding loads for small and/or light doors. The 5 foot length offers a continuous guiding surface, reducing transitions that could cause hesitation in the travel of the doors. With the track assembly finished in white, the hardware stays visually aligned with light-toned surroundings, supporting a consistent look while the sliding function remains the focus of the installation.
Common Questions About EPCO Plastic Door Track
What doors is Plastic Door Track Assembly No. 3 designed for?
Plastic Door Track Assembly No. 3 is designed for 1/4 inch by-passing wood and/or glass doors, so it suits small, lightweight panels using an overlapping sliding layout.
How long is this EPCO plastic door track assembly?
The EPCO plastic door track assembly is 5 feet long, providing a continuous run that spans many cabinet or small opening widths without joints across the track.
What material is the sliding door track made from?
The sliding door track is made from high impact, extruded polystyrene, which forms a rigid plastic profile for guiding small and/or light doors along a stable path.
Why is this track recommended for small and light doors?
The track assembly is specified as recommended for small and/or light doors, so its high impact extruded polystyrene construction and design match lighter sliding loads.
What is the finish color of this EPCO door track?
The EPCO door track assembly is white, so it blends well with light-colored cabinetry or casework where discreet sliding hardware is preferred.
What does the EPCO part number 3-WH-5 indicate?
The EPCO part number 3-WH-5 identifies this Plastic Door Track Assembly No. 3 in white with a 5 foot length, supporting accurate selection and reordering.
Select This Track Assembly For 1/4 Inch By-Passing Doors
The EPCO Plastic Door Track Assembly No. 3 brings a high impact, extruded polystyrene track in a 5 foot length, tailored for 1/4 inch by-passing wood and/or glass doors. The white finish supports clean cabinet and small opening layouts where light or neutral interiors are planned. For projects using small and/or light sliding panels, this assembly provides a defined path and appearance matched to those applications, ready to integrate into sliding door hardware plans.