Plastic Door Track Assembly No. 3 for 1/4" Door 5' L, Brown

Plastic Door Track Assembly No. 3 For 1/4 Inch Doors

Plastic door track assembly No. 3 is designed for 1/4 inch by-passing wood and/or glass doors, so it gives you a matched guide and track setup for lightweight sliding door runs. The EPCO assembly is made from high impact, extruded polystyrene, which provides a tough plastic profile that handles regular sliding motion on small and/or light doors. The 5 foot length gives you a continuous run for typical cabinet or closet-width openings, limiting joints that can snag door travel. The brown color helps the track blend with darker casework, so the hardware stays visually low profile in finished installations. This assembly is classified as sliding door hardware in the builders hardware category, which aligns it with common shop workflows for sliding cabinet and panel doors. The EPCO manufacturer part number 3-BR-5 ties this specific length and color to repeated ordering on future projects.

Key Track Assembly Details That Support Door Motion

• The track assembly is for 1/4 inch by-passing wood and/or glass doors, so it supports two overlapping doors that slide past each other in a compact opening.
• The assembly is recommended for small and/or light doors, which helps match the hardware to modest door loads common in cabinets and light partitions.
• The components are made from high impact, extruded polystyrene, so the plastic profile absorbs everyday use without metal-on-metal noise in typical sliding door applications.
• The assembly uses EPCO plastic upper guide 2214, giving the top of the door a dedicated guiding component that stabilizes travel in the upper channel.
• The assembly uses EPCO plastic track 214, so the running surface is matched to the guide for smoother sliding along the full 5 foot length.
• The track assembly length is 5 feet, which covers many cabinet or closet spans in a single piece, helping maintain aligned travel across the opening.

Sliding Door Track Details For Practical Installation

The 1/4 inch door reference in this EPCO track assembly defines the intended door thickness range, so wood and glass doors in that size class sit properly in the guiding surfaces. The by-passing design supports two doors moving on overlapping paths, which is useful when swing clearance is limited in built-ins or wall openings. The 5 foot length reduces the need for field splicing, so alignment of the EPCO plastic track 214 remains consistent across the doorway. Using the matching plastic upper guide 2214 ties the door top and track geometry together, which helps the door stay upright and track true through its travel. The high impact, extruded polystyrene construction gives installers a cuttable plastic section, which simplifies fitting the track assembly to actual opening widths.

Using This EPCO Track Assembly In Sliding Door Runs

Where This Plastic Door Track Assembly Fits Best

This EPCO plastic door track assembly No. 3 is specified for 1/4 inch by-passing wood and/or glass doors, so it fits jobs where two slim doors share the same opening and slide past each other. In cabinet work, that covers light door sets across upper storage, shop casework, or built-in niches where space is tight. The recommendation for small and/or light doors focuses the hardware on modest panel sizes, which suits shorter, thinner doors instead of tall, heavy assemblies. As sliding door hardware in the builders hardware category, it integrates into projects that already rely on discrete tracks and guides rather than full framed systems. The 5 foot brown track and guide combination works along medium-width spans, so many openings can be handled with a single continuous piece that visually recedes against darker interiors.

Details That Support Repeatable Sliding Performance

The use of high impact, extruded polystyrene in this EPCO assembly means the plastic upper guide 2214 and plastic track 214 share the same material family, which promotes a consistent sliding interface across the full run. That matched plastic-to-plastic contact helps deliver predictable movement, which is important when aligning multiple by-passing doors in the same bank. The 1/4 inch door design keeps the panels properly captured, so the door edge stays seated in the guide while moving, limiting lateral wander over time. With a full 5 foot length, the track gives the door a continuous path, which reduces small changes in elevation that can occur at joints. The EPCO manufacturer part number 3-BR-5 clearly identifies this brown, 5 foot configuration, allowing shops to standardize on the same sliding door hardware setup across repeat projects for consistent feel and appearance.

Common Questions About EPCO Plastic Track Assembly No. 3

Select This Track Assembly For 1/4 Inch Sliding Doors

The EPCO plastic door track assembly No. 3 provides a matched plastic upper guide 2214 and plastic track 214 for 1/4 inch by-passing wood and/or glass doors, so it forms a coordinated sliding system. The high impact, extruded polystyrene construction and 5 foot brown track length align well with small and/or light door applications across cabinets and similar openings. For projects that repeat this door format, the defined EPCO part number 3-BR-5 supports consistent hardware selection and uniform sliding performance.