1/4" x 72" Sliding Track, Walnut Finish
Description
1/4 Inch Sliding Track For Bypassing Doors
1/4 inch sliding track from EPCO is designed for 1/4 inch by-passing wood and/or glass doors, so it guides paired panels on a single opening where doors need to overlap smoothly. This sliding door hardware uses high impact, extruded polystyrene, which provides a durable plastic track surface that supports repeated sliding motion on small and/or light doors. The 6 ft length gives continuous tracking over typical cabinet or closet spans, which helps maintain alignment across the full run without breaks. The walnut finish gives the visible track area a darker tone that blends with walnut-colored applications, which helps keep the hardware visually consistent with the surrounding casework. The track works within the EPCO sliding door hardware line, so it fits into projects that rely on this specific plastic upper guide and track combination for consistent operation.
Key Sliding Track Details That Support Use
- The design for 1/4 inch by-passing wood and/or glass doors creates a defined groove size, which stabilizes properly sized panels so they move in their lanes without excessive side play.
- The high impact, extruded polystyrene construction forms a rigid plastic profile, which resists cracking under normal sliding loads on small and/or light doors during regular operation.
- The 6 ft long track section spans typical cabinet or small closet openings, which reduces joint transitions in the sliding path and helps doors travel smoothly from end to end.
- The walnut finish provides a brown-toned appearance along the exposed track edge, which helps the installed hardware visually coordinate with walnut or similarly dark-stained woodwork.
- The EPCO brand and specific components plastic upper guide 2214 and plastic track 214 define an integrated sliding assembly, which supports consistent fit when these matching parts are used together.
Sliding Track Fit, Length, And Door Movement
The configuration for 1/4 inch by-passing wood and/or glass doors defines the channel size, so door panels fabricated to this thickness can nest correctly and slide past each other without binding. Using high impact, extruded polystyrene gives the track a shaped plastic profile, so the running surfaces for the doors and guide remain stable under normal cabinet or light door use. The 6 ft long format provides a continuous run, which minimizes interruptions in the travel path and helps maintain alignment from one end of the opening to the other. The walnut finish sets a darker visual tone along the track, so when the hardware edge is visible it can complement walnut-style finishes rather than drawing attention.
Sliding Door Hardware Use And Project Fit
Where This Sliding Track Works Best
The EPCO sliding door hardware is specified for 1/4 inch by-passing wood and/or glass doors, which positions it for cabinets, small closets, or similar openings that use thin overlay panels. The focus on small and/or light doors matches the capacity of the high impact, extruded polystyrene track, so the material supports smooth motion without being oversized for lighter panels. The 6 ft length lets installers cover common cabinet or built-in spans in a single piece, which suits continuous openings where the full width needs sliding access. With a walnut finish, the track aligns visually with walnut-toned millwork, so it integrates into furniture or casework that uses darker species or stains without requiring separate finishing steps.
Details That Support Smooth, Repeatable Sliding
The combination of plastic upper guide 2214 and plastic track 214 defines a matched guiding system, so the door movement follows the intended path created by these EPCO parts. The high impact, extruded polystyrene forms a consistent interior profile, which supports repeated sliding of small and/or light doors while maintaining the guiding surfaces. Designing the hardware for 1/4 inch by-passing wood and/or glass doors specifies the working clearance, so when doors are built to that thickness they track in their channels and pass in front of or behind each other as expected. The 6 ft long section keeps the guiding geometry uniform along the run, which helps each door maintain the same reveal and movement characteristics across the entire opening. The walnut finish contributes a controlled, brown appearance where the track is visible, which keeps the sliding hardware aligned with walnut-finished projects as doors move.
Common Questions About This EPCO Sliding Track
What type of doors does this 1/4 inch sliding track support?
This sliding track is for 1/4 inch by-passing wood and/or glass doors, so it suits projects using thin overlapping panels that slide past each other on a shared opening.
How does the high impact extruded polystyrene help in use?
The high impact, extruded polystyrene creates a rigid plastic track profile, so the guiding surfaces handle normal loads from small and/or light doors during repeated sliding.
Why is the 6 ft sliding door track length important?
The 6 ft long track gives a continuous guiding run across many cabinet or small closet openings, so doors travel from side to side without transitions in the track.
What does the walnut finish on the track provide?
The walnut finish gives the track a brown-toned appearance, so exposed edges coordinate visually with walnut or similar dark wood finishes around the opening.
How do the plastic upper guide 2214 and plastic track 214 work together?
The plastic upper guide 2214 pairs with plastic track 214 as an EPCO system, so the components share matching geometry for guiding small and/or light sliding doors.
Is this track suited for small and light sliding doors?
This track is recommended for small and/or light doors, so its high impact, extruded polystyrene material and channel size are matched to lighter sliding panels.
Selecting This Track For 1/4 Inch Doors
This 1/4 inch sliding track from EPCO combines a defined 1/4 inch by-passing door design, high impact, extruded polystyrene construction, and a 6 ft length, so it supports smooth travel of small and/or light wood or glass doors across typical openings. The walnut finish and the matched components plastic upper guide 2214 and plastic track 214 create a coordinated sliding door hardware solution, so projects using walnut-toned casework and EPCO parts can align appearance with controlled door movement.