Plastic Door Track Assembly No. 3 for 1/4" Door 3' L, White
Description
Plastic Door Track Assembly No. 3 For Bypassing Doors
Plastic Door Track Assembly No. 3 is a sliding door hardware set designed for 1/4 inch bypassing wood and/or glass doors, so it supports two doors sliding past each other in a compact opening. The assembly is made for small and/or light doors, which suits upper cabinets, small closets, or light partitions where heavy-duty track is not required. Its 3 foot length spans short to mid-size openings, giving straightforward coverage for many cabinet or casework widths. The components are manufactured from high impact, extruded polystyrene, so the track and guide resist cracking under normal door movement. The white color helps the hardware blend with common light finishes, so the track is less visually distracting in finished work. EPCO branding and the 3-WH-3 part number give a clear reference for repeat orders or matching existing installations.
Key Sliding Track Details That Support Smooth Use
- The design for 1/4 inch bypassing wood and/or glass doors means it handles narrow panel construction, which is common in small cabinet doors and light interior panels.
- The recommendation for small and/or light doors matches situations where low-mass doors reduce load on the track, which can extend usable life in typical light-duty applications.
- The 3 foot long track provides a defined span for door travel, which helps layout door overlaps and opening widths during cabinet or casework planning.
- The high impact, extruded polystyrene material resists everyday knocks and sliding wear, which helps the guiding surfaces maintain consistent movement over time.
- The white finish coordinates with many painted and laminate interiors, which keeps the visible hardware discreet when doors are open.
- The EPCO Plastic Upper Guide #2214 paired with Plastic Track #214 matches a known component set, which simplifies specifying matching replacement parts by number.
Sliding Door Track Layout And Fit Considerations
This EPCO plastic door track assembly is built for 1/4 inch bypassing wood and/or glass doors, so door thickness and material choice align directly with the track profile and upper guide. The 3 foot long plastic track #214 provides a fixed run for each door, which makes it easier to plan door overlap and opening size during design. The high impact, extruded polystyrene construction supports the sliding motion of small and/or light doors, so the doors operate within the material's intended load range. The white color of the track and guide helps them sit visually in the background, which is useful in open cabinet interiors where hardware might otherwise stand out.
Applying EPCO 3-WH-3 Track In Real Projects
Where This Plastic Door Track Assembly No. 3 Fits
The EPCO Plastic Door Track Assembly No. 3 is specified for 1/4 inch bypassing wood and/or glass doors, so it serves installations where narrow panels slide past one another rather than swinging. This configuration works in cabinet-style openings or similar light-duty enclosures where conserving front clearance matters. The recommendation for small and/or light doors directs it toward modest-size panels instead of full-height or heavy doors, keeping operation within the intended duty range. Its role as sliding door hardware within builders hardware simplifies coordination with other components in a project, because installers can plan this track wherever a light bypassing door is needed. The white, high impact extruded polystyrene construction suits clean interior spaces where a neutral, non-metallic track is desirable around shelves or stored items.
Details That Support Consistent Sliding Performance
The pairing of Plastic Upper Guide #2214 with Plastic Track #214 defines the movement path for 1/4 inch doors, so the door edge stays confined to a matching channel and guide. This coordinated path helps bypassing doors track predictably, which reduces side play during repeated use. The high impact, extruded polystyrene material in the track assembly absorbs routine sliding contact from small and/or light doors, so the working surfaces remain stable under typical cabinet loads. The 3 foot long track length gives a straightforward dimension for planning panel sizes and overlaps, which helps maintain smooth travel without over-extending the door. The EPCO 3-WH-3 identifier ties all of these details into one part number, so specifiers and installers can repeat the same setup across multiple openings with consistent results.
Common Questions About EPCO Sliding Door Track 3-WH-3
What doors does Plastic Door Track Assembly No. 3 work with?
Plastic Door Track Assembly No. 3 is for 1/4 inch bypassing wood and/or glass doors, so it suits narrow panels that slide past each other in light-duty applications.
How long is the EPCO 3-WH-3 sliding door track?
The EPCO 3-WH-3 plastic track is 3 foot long, giving a defined sliding span that helps size small and/or light doors and set their overlap.
What material is this EPCO plastic door track made from?
This EPCO plastic door track assembly is made from high impact, extruded polystyrene, which supports repeated sliding by small and/or light doors in typical interior use.
Is this track suitable for heavy sliding doors?
This track assembly is recommended for small and/or light doors, so it serves lighter door panels rather than heavy or oversized doors.
What components define the EPCO 3-WH-3 track system?
The EPCO 3-WH-3 system uses Plastic Upper Guide #2214 with Plastic Track #214, so the guide and track are matched for 1/4 inch bypassing doors.
How does the white color of the track help in cabinets?
The white color lets the track assembly blend with many cabinet interiors, so the sliding hardware stays visually unobtrusive when the doors are open.
Choose EPCO 3-WH-3 For Light Bypassing Door Runs
The EPCO Plastic Door Track Assembly No. 3 for 1/4 inch bypassing wood and/or glass doors gives a defined 3 foot long path for small and/or light sliding panels. The high impact, extruded polystyrene construction and coordinated Plastic Upper Guide #2214 with Plastic Track #214 support consistent movement. The white finish suits many interior cabinet and light partition layouts. For projects calling for this combination of 1/4 inch bypassing doors, EPCO branding, and 3-WH-3 part identification, this assembly provides a clear, repeatable choice.