Cuff flange for 1 inch tubing is a closed flange designed for 1 inch and 1-1/16 inch tubing, so one part handles both common closet rod sizes on a run. The EPCO 855-ORB part number identifies this specific cuff flange, which helps keep ordering and reordering consistent across jobs. The aluminum construction keeps the flange rigid while staying light, which matters when you are hanging it on finished closet panels or cabinet sides. The 30mm length of the flange body provides a defined bearing surface for the tubing, which helps support the rod end in normal closet and storage applications. The oil rubbed bronze finish gives the flange a dark, muted appearance that coordinates with similar closet hardware finishes on rods and other components. As part of the Wurth Baer Supply closet tubing and flanges assortment, this cuff flange fits into standard closet and organization layouts.
The closed flange for 1 inch and 1-1/16 inch tubing is sized to receive those rod diameters, so installers can set up closet tubing with a predictable fit at each end. Because the flange screws on to a back plate, the structural fasteners are concentrated at the plate, while the cuff positions over it to finish the opening. This invisible mount approach lets the aluminum body and oil rubbed bronze finish define the visible detail without exposed screw heads at the front. The 30mm length provides room for the tubing to seat into the flange, helping align rod ends and giving each support point a consistent depth along a straight closet run or between cabinets.
The EPCO 855-ORB cuff flange is part of the closet rods and flanges class, so it is suited to shelf, closet, and garage organization layouts that rely on 1 inch or 1-1/16 inch tubing. Its role as a closed flange means it is installed at rod ends, where the tubing needs to be captured rather than passing through an open support. Because the flange screws on to a back plate, it fits situations where there is solid material behind the mounting point, such as cabinet sides, wall cleats, or closet partitions. The oil rubbed bronze finish allows this aluminum flange to visually fit with oil rubbed bronze closet tubing and flanges in the same storage system, keeping rods and supports aligned in both finish and function.
The combination of a closed flange and sizing for 1 inch and 1-1/16 inch tubing gives the EPCO 855-ORB a defined interface with standard closet rods, which supports repeatable cuts and layouts from job to job. By screwing onto a back plate, the flange positions consistently relative to the mounting surface, because the plate sets the screw pattern while the cuff threads or fastens to it in a fixed relationship. This arrangement helps keep rods square to the supporting panels and aligned across a bank of cabinets or closet sections. The invisible mount keeps fasteners behind the cuff, which allows installers to focus on straight runs and level alignment instead of hiding screw heads at the face. The 30mm length defines how far the tubing seats into the flange, so measuring between flanges can be done with that seating depth in mind for more accurate rod sizing.
The EPCO 855-ORB closed flange is designed for 1 inch and 1-1/16 inch tubing, so it matches two common closet rod diameters within one part number on a project.
The closed flange screws on to a back plate, so the fastening occurs at the plate while the cuff covers it, leaving a clean oil rubbed bronze face at the mounting point.
The 30mm length gives the tubing a seating depth inside the aluminum body, which helps position and support the rod end consistently across closet sections.
The aluminum construction keeps the cuff flange light, while the oil rubbed bronze finish provides a dark, coordinated look with similar closet tubing and flanges.
The closed flange for 1 inch and 1-1/16 inch tubing is used at rod ends, where the tubing needs to terminate and be captured against a wall or panel.
The EPCO 855-ORB cuff flange is used in shelf, closet, and garage organization projects within the closet rods and flanges category from Wurth Baer Supply.
The EPCO cuff flange for 1 inch and 1-1/16 inch tubing pairs a closed flange design with a 30mm aluminum body and an oil rubbed bronze finish, giving closet and organization projects a consistent rod termination point. The screw-on back plate mount provides an invisible attachment that keeps the focus on straight, level tubing rather than exposed fasteners. For work drawing on the Wurth Baer Supply closet rods and flanges assortment, choosing the 855-ORB part number sets a clear standard for rod ends that fit both common tubing diameters on the same job.
Sold In: 1 Each