Cuff flange for 1 inch tubing is a closed flange designed for 1 inch and 1-1/16 inch tubing, so it supports common closet rods used in shelf, closet, and garage organization projects. The flange is part of the Closet Rods & Flanges product class, which means it is intended as the structural connection point between rod and mounting surface. This model is Epco 855-SS, giving installers a clear, repeatable part number when matching or expanding existing runs. The flange uses a back plate that the cuff screws on to, so the mounting fasteners stay concealed during normal use. By hiding the mounting detail, the flange helps create a clean finished look on open closet installations. The flange body is stainless steel, which provides a solid housing for the tubing interface in everyday residential or light commercial closet environments. A 30mm length gives a compact profile at the rod end while still offering engagement depth along the tubing.
The closed flange for 1 inch and 1-1/16 inch tubing uses a back plate that the cuff screws on to, so the installer first secures the plate and then threads or fastens the cuff in place for final alignment. This sequence lets the back plate establish the rod centerline on the wall or panel while the cuff provides the finished face around the tubing. Because the mounting fasteners sit behind the cuff, the aligned flange presents only the stainless steel exterior once the rod is seated. The 30mm length of the cuff sets the engagement distance for the tubing, which helps define how far the rod end sits from the mounting surface for consistent spacing across multiple supports.
This cuff flange is specified for 1 inch and 1-1/16 inch tubing, so it fits closet rods within that size range in shelf, closet, and garage organization layouts. As part of a Closet Rods & Flanges system, it acts as the termination or support point wherever a rod meets a vertical panel or wall. The stainless steel construction suits typical indoor storage environments, where rods carry garments or light gear on hangers. With a 30mm length, the flange keeps the rod end close to cabinetry sides or closet panels, which is useful in reach-in closets or built-in cases where clearances are tight. The Epco 855-SS designation gives shops and installers a consistent reference when ordering multiples for multi-closet jobs or matching previous work.
The closed flange design for 1 inch and 1-1/16 inch tubing supports the rod along its full contact circumference, which helps distribute load around the tubing interface during everyday use. By screwing on to a back plate, the cuff allows the structural attachment to be set first, then covered by the finished stainless body, which streamlines layout and reduces visible hardware at eye level. The concealed mounting improves the appearance of open rod ends, which matters in closets that remain visible without doors. The 30mm length defines how deeply the tubing seats inside the cuff, helping installers create a uniform rod projection at each end of a run. Because the flange is stainless steel, the contact surface at the rod end remains metal-to-metal, which supports the rod connection in typical residential closet duty cycles.
The cuff flange for 1 inch and 1-1/16 inch tubing accepts rods in those diameters, allowing one flange style to serve both common closet tubing sizes on a project.
The closed flange screws on to a back plate that is mounted to the surface, so the plate carries the attachment while the cuff finishes the visible side around the tubing.
The closed flange design surrounds the 1 inch or 1-1/16 inch tubing, supporting the rod end around its circumference and helping maintain alignment during normal hanging loads.
The flange mounts invisibly because the cuff covers the back plate and fasteners, resulting in a clean stainless steel appearance at the rod end without exposed mounting hardware.
The 30mm length sets the depth that the tubing seats into the cuff, helping define rod projection from the mounting surface and aiding consistent spacing across multiple supports.
The stainless steel construction provides a solid flange body around the tubing contact area, supporting everyday use in indoor closet and storage environments.
This Epco 855-SS cuff flange for 1 inch and 1-1/16 inch tubing from Wurth Baer Supply provides a closed, stainless steel support point with invisible mounting for closet rods. The 30mm length and back plate mounting design help establish consistent rod projection while keeping fasteners out of sight. For projects using closet tubing within the stated size range, this flange offers a defined part number and mounting method that aligns with typical shelf, closet, and garage organization layouts.
Sold In: 1 Each