Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Cuff flange for 1 in tubing describes this EPCO 855-SN closed flange designed for 1 inch and 1-1/16 inch closet tubing, which lets you support standard round rods across closet or storage spans using a dedicated mounting point. The closed flange design wraps the tubing, so the rod seats positively in the flange, which helps keep the installation stable over time. The aluminum construction stated in the description provides a lightweight flange body, which helps during layout and handling when you are working overhead or across multiple supports. The satin nickel finish gives the flange a neutral, project-friendly appearance, which suits many closet, shelf, and garage organization layouts where visible hardware needs a consistent look. The 30mm length noted in the product name defines the depth of the flange body, which positions the tubing consistently from the mounting surface for repeatable rod alignment.
The description that this flange screws on to a back plate and mounts invisibly defines a two-part mounting arrangement, which lets you secure the back plate first and then fasten the flange body over it for a cleaner finished face. Because the EPCO 855-SN is a closed flange for 1 inch and 1-1/16 inch tubing, the installer feeds the round rod into the cuff opening, which provides a positive capture point for the tubing at the support location. The 30mm length body keeps the tubing centered relative to the mounting surface, which is important when aligning opposite flanges at each end of a closet rod so the rod sits level and tracks straight.
The Web Description and category placing this part under closet tubing and flanges and closet rods and flanges situate the EPCO 855-SN in shelf, closet, and garage organization layouts, which means it is suited to supporting hanging rods in those spaces. Because the flange is specified as closed for 1 inch and 1-1/16 inch tubing, it serves installations that rely on standard round closet rods within that size range, giving a defined support point wherever a rod terminates or needs an intermediate brace. The satin nickel designation in the product name allows this flange to sit visually alongside satin nickel-finished tubing or nearby hardware, which helps maintain a consistent hardware appearance across cabinetry or storage runs. The 30mm length aluminum body offers a compact cuff around the rod, which works well when space near the side panel or wall is limited and you still need full rod capture at the support.
The noted feature that the flange screws on to a back plate and mounts invisibly allows you to stage the back plate, check rod position relative to adjacent panels, and then cover the attachment points, which supports clean alignment without exposed fasteners at the visible face. The closed flange configuration for 1 inch and 1-1/16 inch tubing provides a defined bore for the tubing, which helps keep the rod from lifting out at the ends, reducing movement along the run when the closet or garage rod is under load. The aluminum construction keeps each EPCO 855-SN flange light, which is useful when positioning multiple points along tall closet sides or wall cleats, because the part is easier to hold in place while marking and driving fasteners. The 30mm length body maintains consistent projection of the tubing from the mounting surface, which is important when you are matching a rod line across several cabinets or organizing bays so hangers clear doors and front edges in a repeatable way.
The EPCO 855-SN cuff flange is described as a closed flange for 1 inch and 1-1/16 inch tubing, which targets typical round closet rods in that size range for shelf, closet, and garage applications.
The Web Description notes that the flange screws on to a back plate and mounts invisibly, so the mounting plate holds the flange while the front face stays clear for a cleaner finished appearance.
The 30mm length in the product name identifies the body length, which positions the tubing at a controlled distance from the mounting surface to support consistent rod alignment across multiple supports.
The Web Description identifies the product as aluminum, so the EPCO 855-SN cuff flange uses an aluminum body that stays light during layout and rod support installation work.
The satin nickel designation in the product name defines the flange finish, which lets you coordinate it with satin nickel closet tubing and nearby hardware for uniform visual results.
The category and description place this part as a closet tubing and flanges component, so it serves as a mounting point that captures and supports 1 inch or 1-1/16 inch rods in organization systems.
The EPCO 855-SN cuff flange is defined as a closed flange for 1 inch and 1-1/16 inch tubing with a 30mm length aluminum body and satin nickel finish, so it matches standard closet rod sizes while keeping the visible face clean through its invisible mounting back plate design.
Sold In: 1 Each