Hettich Quadro V6 450mm Soft-Close Full Extension Undermount Drawer Slides, Ball Bearing Left hand Zinc - 9245363

Hettich Quadro V6 450mm Drawer Slide Use

Hettich Quadro V6 450mm drawer slide is a left hand, full extension undermount drawer slide designed for standard drawer applications where smooth travel and front alignment are important. The integrated Silent System provides soft closing, so drawers run in on a controlled motion, which helps prevent slamming in everyday use. The slide length of 450 mm sets the drawer depth, which supports consistent cabinet layouts across a project. As a full extension undermount slide, the moving hardware stays hidden under the drawer box, keeping the drawer sides clear for clean cabinet interiors. This version is specified as left hand, which matters when pairing it with the matching right-hand slide for proper tracking. The galvanized steel construction resists corrosion in normal indoor cabinet environments, supporting long-term performance in kitchens, baths, and shop furniture.

Key Functional Details For Drawer Builders

• The integrated Silent System provides soft closing, which controls the final drawer movement and helps reduce impact on the cabinet front during everyday use.
• Full extension undermount action brings the drawer fully forward, improving access to stored items and helping installers confirm consistent gaps at the front.
• Load capacity up to 30 kg for standard applications supports typical residential and light commercial drawer loads without over-specifying heavier slide hardware.
• An additional version for particularly light drawers up to 10 kg is available, allowing hardware selection to match drawer weight ranges on a project.
• The Quadro V6 system can be retrofitted with Push to open Silent, which enables handle-free drawer fronts while retaining controlled opening and soft closing.
• Load capacity to EN 15338, Level 3, ties the slide performance to a recognized standard, giving specifiers a clear reference for durability and loading expectations.

Undermount Slide Installation And Adjustment

The Quadro V6 450 mm slide uses a slide on installation with 4D catches, so the drawer box connects to the slide with a dedicated clip instead of loose fasteners. Tool-less, intuitive adjustment of the drawer front panel allows height adjustment up to plus 2 mm, which is useful for aligning stacked drawers. Side adjustment up to plus or minus 1.5 mm, with a maximum drawer side profile thickness of 15 mm, provides fine tuning of reveals between drawer fronts. Depth adjustment up to plus or minus 2 mm lets installers pull fronts in or out to flush with adjacent fronts or doors. Tilt adjustment works with the tilt adjuster to correct top-to-bottom front angle, helping get parallel lines across a bank of drawers. The 4D catch and tilt adjuster must be ordered separately, separating the slide from the front-adjustment components.

Real-World Drawer Slide Performance On Projects

Where This Quadro V6 Slide Is Typically Applied

This Quadro V6 450 mm left hand undermount slide is suited to standard drawers that benefit from full extension access and soft closing action. Its load capacity up to 30 kg for standard applications aligns with common base cabinet, vanity, and furniture drawers that carry everyday contents rather than extreme loads. The specified version available for particularly light drawers up to 10 kg fits small or narrow drawers where a lighter-weight configuration is preferred. As an undermount slide in galvanized steel, it supports typical kitchen, bathroom, and shop cabinetry where hardware is protected inside the cabinet. The slide length and full extension travel give designers predictable clearances, helping standardize drawer depths across multiple cabinet runs in residential or commercial millwork.

How Adjustment And Silent System Support Results

The integrated Silent System provides soft closing that works together with the front adjustments to keep drawers closing cleanly even after alignment changes. Height adjustment up to plus 2 mm lets installers shift the front vertically to maintain consistent horizontal lines under varying site conditions. Side adjustment up to plus or minus 1.5 mm helps correct minor case tolerances while respecting the maximum drawer side profile thickness of 15 mm, so runners and sides work within their designed geometry. Depth adjustment up to plus or minus 2 mm allows final tuning of the front plane, which is important when coordinating with doors, appliances, or adjacent panels. Tilt adjustment enables fine control of the front angle, helping reduce binding and uneven gaps over time. Compliance with load capacity to EN 15338, Level 3 directly ties these functions to a tested performance level, supporting repeatable results across multiple installations. The ability to retrofit Push to open Silent lets shops use the same slide family when switching to handle-free fronts, keeping motion characteristics consistent.

Common Questions About Quadro V6 450mm Slide

Selecting This Slide For Your Next Cabinet Run

The Hettich Quadro V6 450 mm left hand undermount slide combines full extension, integrated Silent System, and tool-less 4D front adjustment to support accurate alignment on finished cabinetry. Its load capacity up to 30 kg for standard applications covers most kitchen, bath, and furniture drawers, while an additional version for particularly light drawers up to 10 kg offers flexibility for smaller units. Galvanised steel construction and EN 15338, Level 3 load capacity testing tie performance to recognized standards. When a project calls for soft close action, concealed undermount hardware, and fine adjustment of drawer fronts, this Quadro V6 model provides a consistent platform to build around.