SD single track 5ft anodized gives you a straight aluminium track for sliding door hardware that supports a clean running path for the door, which matters when you want consistent movement along the full 5 foot opening. The aluminium, anodised construction provides a hardened surface on the track, which helps the sliding components run on a stable raceway over time. Because this piece is designed as sliding door hardware in a single track format, it defines one fixed line of travel for the door, which is important when you are laying out clearances and overlaps. The 5 foot length means the track spans medium-width openings in one continuous piece, which reduces alignment points along the run.
Drill holes already provided for ease of attachment give you a ready-made fastening pattern in the SD single track, which saves time during installation because you do not have to mark and drill the aluminium yourself. The recommended 4.8 x 32 mm oval head screws work with these pre-formed holes, which helps the fastener heads seat properly in the track profile. Because the track is aluminium, anodised, using the recommended screw size and style supports a secure hold in the available hole geometry. The 5 foot length works with this repeated hole pattern along the run, which helps distribute load from the sliding door over multiple fix points.
The Hettich America Corporation SD single track, 5 foot, sits in the sliding door hardware class, which positions it for applications where a straight linear guide is needed for a door panel. As a single track in aluminium, anodised, it is suited to runs where one rail carries one moving element, which is useful when you want a simple, direct sliding line instead of a multi-track layout. The 5 foot span lets the track bridge typical small to mid-size openings in one piece, which reduces joints that could interrupt the travel path. Being part of builders hardware and sliding door hardware means it functions as the primary guiding component in that assembly, so its length and material directly influence how the door runs.
The aluminium, anodised finish on the SD single track creates a treated surface that interacts predictably with matching sliding components, which matters when you want repeatable door motion without the track surface changing quickly in normal service. Drill holes already provided for ease of attachment create a consistent spacing pattern, which helps keep the track straight during fastening because each screw position has been set by the manufacturer. The recommended 4.8 x 32 mm oval head screws are sized for these pre-formed holes, which supports firm clamping of the track against the mounting surface along the entire 5 foot length. As a sliding door hardware element identified by manufacturer part 9199835, this track can be specified by that number, which helps you match like-for-like parts on future projects or when replicating an installation.
The SD single track is 5 feet long, which lets you span many small to mid-width openings with one continuous sliding door hardware rail.
The track is aluminium, anodised, giving a treated metal surface that supports consistent contact with sliding door components during normal use.
The SD single track has drill holes already provided for ease of attachment, so you fasten through these holes to secure the 5 foot rail.
The SD single track is recommended for use with 4.8 x 32 mm oval head screws, which match the pre-formed attachment holes.
The manufacturer part number is 9199835, which identifies this specific 5 foot aluminium, anodised SD single track from Hettich America Corporation.
The single track design provides one defined path for the sliding panel, which helps when planning clearances and door overlap along the opening.
The SD single track 5ft anodized format gives you a defined 5 foot aluminium, anodised rail with drill holes already provided for ease of attachment, which is useful when setting up a straightforward sliding door hardware run. Using the recommended 4.8 x 32 mm oval head screws with this Hettich America Corporation track helps align the fastening method with the pre-formed hole pattern. For projects calling for a single sliding path in builders hardware or sliding door hardware work, this 9199835 track offers a clearly specified option that can be ordered again when the same layout is needed.
Sold In: 1 Each