SD single track 6ft anodized describes an aluminum sliding door track that guides door movement, so panels run along a defined path instead of drifting during operation. The track is part of the Hettich America Corporation sliding door hardware line, which sets a consistent identity for matching hardware across a project. As a single track, it serves one sliding line of movement, which suits straightforward openings where each door follows a dedicated route. The 6 foot length spans typical cabinet or closet widths in one piece, which reduces joints that might otherwise affect alignment. The anodized aluminum material provides a uniform surface along the run, so door rollers contact a consistent track face every time they pass.
The Hettich America Corporation SD single track, 6ft, uses drill holes already provided for ease of attachment, so the track presents specific fixing locations instead of requiring drilling during mounting. This matters when working on finished substrates, because the pre-formed holes define where the track bears on the supporting surface. The reference to 4.8 x 32 mm oval head screws directs installers toward a screw size and head style that suit the holes, which supports a seating profile that matches the track geometry. The 6 foot span lets the track extend across the opening in one continuous run, which means all fasteners pull on a single piece for straight alignment along the full travel.
The SD single track from Hettich America Corporation is classified as sliding door hardware, so it functions as the running channel that works with corresponding door components in a sliding system. Being aluminium, anodised gives the track a rigid metal profile with a treated surface, which provides a consistent run for rollers that travel along the length. The 6 foot dimension places the track in applications that need that span in a single piece, such as wider cabinet or casework runs that benefit from an uninterrupted line. Because drill holes are already provided for ease of attachment, the track is designed to sit directly against a supporting member where those holes land, so positioning decisions can be made around the fixed hole pattern. Within a hardware assembly, this track defines the upper or lower guide path, depending on system design, so doors follow the path established by the installed profile.
The predefined 6 foot length of the Hettich 9199836 track keeps the running surface uniform from end to end, which supports predictable sliding behavior because door components encounter the same profile throughout travel. The aluminium, anodised construction maintains that profile under normal sliding loads, so the geometry that guides the door remains consistent over time as it operates. Drill holes already provided for ease of attachment space the fixing points along the track, which distributes holding forces in a pattern intended for that profile. When installers use the recommended 4.8 x 32 mm oval head screws, the head form suits the described interface, helping the screw seat relative to the track in a repeatable way. As part of the Hettich America Corporation sliding door hardware class, this SD single track fits into assemblies where defined motion, controlled guiding, and repeatable alignment of panels are priorities in the finished installation.
The SD single track 6ft anodized is an aluminum sliding door track that guides door movement along its length, so doors follow a defined path as part of a sliding door hardware system.
The track is described as aluminium, anodised, which provides a metal running surface with a treated finish where door components contact and move along the profile.
The Hettich 9199836 SD single track has a 6 foot length, allowing one continuous track to span openings that match that dimension without joints in the running surface.
The track has drill holes already provided for ease of attachment, so it is fixed through those prepared holes into the supporting structure along its 6 foot length.
The recommended fastener for this SD single track is a 4.8 x 32 mm oval head screw, which aligns with the described hole and head interface for attachment.
This SD single track, 6ft, anodized sliding door hardware is produced by Hettich America Corporation, positioning it within that manufacturers sliding door hardware range.
The SD single track, 6ft, anodized from Hettich America Corporation provides a dedicated aluminum guide for sliding door movement, using a 6 foot length with drill holes already provided for ease of attachment. The aluminium, anodised description defines the track construction and finish, while the recommendation of 4.8 x 32 mm oval head screws clarifies the fastener interface. For projects that call for a single-piece sliding door track in this dimension, this SD single track offers a clearly defined role within sliding door hardware assemblies.
Sold In: 1 Each