SD Single Track 8ft describes an aluminium, anodised sliding door hardware track designed to guide sliding doors along a straight run, so door panels move in a defined path for predictable operation. The aluminium construction keeps the track rigid while keeping weight manageable during handling and mounting. The anodised finish treats the aluminium surface, which supports consistent appearance along the 8 ft length during everyday use. As part of Hettich America Corporation sliding door hardware, this track assigns the door a fixed running line, which helps maintain alignment relative to the cabinet or opening. The single-track format focuses on one sliding line, which suits straightforward sliding door layouts where one guided path is required.
This SD SINGLE TRACK,8FT,ANODIZED rail uses drill holes already provided for ease of attachment, so installers work with defined fixing positions instead of laying out and drilling through the aluminium body on site. Each pre-formed hole accepts the recommended 4.8 x 32 mm oval head screws, which fit the hole sizing and help seat the track securely against the chosen substrate. Using these specified screws keeps the fastener head shape aligned with the track hole geometry, which supports consistent clamping along the full 8 ft length. The straight aluminium profile then serves as the guiding line for the matching sliding door components relative to the cabinet or wall.
This Hettich America Corporation SD Single Track, identified by Manufacturer Part 9199838, fits into sliding door hardware layouts that call for a single guiding track above or below the moving door. The 8 ft length suits wider cabinets or openings where a continuous aluminium profile is needed to carry the running gear from end to end. Because the track belongs to the Sliding Door Hardware product class, it integrates into assemblies where rollers or guided elements run inside or on the profile. The aluminium, anodised construction keeps the profile suitable for use in woodworking or general builders hardware contexts where metal tracks pair with wood or composite door panels. In these applications, the single track defines the door travel line relative to the surrounding structure.
The drill holes already provided in the SD SINGLE TRACK,8FT,ANODIZED profile give consistent spacing for each fixing point, which helps repeat the same attachment pattern across multiple cabinets or openings. When the recommended 4.8 x 32 mm oval head screws are used in these holes, the screw shank and length match the specified geometry, helping the track sit flush against the mounting surface. This alignment supports smoother door travel because the running gear experiences fewer high or low spots along the 8 ft span. The aluminium, anodised body maintains its profile while fasteners clamp it in place, so the track continues to present a straight guiding edge in finished installations. Over repeated jobs, these defined details help installers apply the same sliding door hardware layout with predictable results.
The SD Single Track 8ft serves as an aluminium, anodised sliding door hardware track, guiding compatible sliding door components along a defined line across openings such as cabinets or similar structures.
The Hettich SD track 9199838 measures 8 ft in length, providing a continuous sliding line for wider openings without intermediate joints along the track section.
The aluminium track uses an anodised finish, creating a treated metal surface that supports a consistent appearance and surface condition along the SD Single Track length.
The SD Single Track 8ft has drill holes already provided, so installers follow existing fixing points rather than laying out and drilling the aluminium body during installation.
The SD SINGLE TRACK,8FT,ANODIZED uses recommended 4.8 x 32 mm oval head screws, which match the drill hole sizing and support secure clamping of the track to the mounting surface.
This SD SINGLE TRACK,8FT,ANODIZED is part of the Sliding Door Hardware product class, meaning it functions as a guiding element within sliding door assemblies.
The SD Single Track, Aluminium, anodised profile from Hettich America Corporation delivers a dedicated sliding door hardware path over an 8 ft span, so door panels follow a controlled route along cabinets or openings. With drill holes already provided and recommended 4.8 x 32 mm oval head screws specified, attachment uses a clear fastening pattern that supports consistent results across repeated builds. Selecting this SD SINGLE TRACK,8FT,ANODIZED, Manufacturer Part 9199838, aligns the track with documented sliding door layouts where a single, straight aluminium guiding line is required.
Sold In: 1 Each