SD Single Track 16ft anodized describes an aluminium sliding door track from Hettich America Corporation designed as sliding door hardware. The aluminium construction forms a rigid running surface for door hardware, which supports stable movement across the full 16 foot span in cabinet or architectural runs. The anodised finish treats the aluminium track surface, which helps resist surface wear during repeated sliding cycles in busy environments. Being part of the sliding door hardware category defines this component as the guiding and supporting element, so it sets the alignment reference for the complete sliding door assembly. The single track format concentrates the running path into one channel, which helps installers layout straightforward linear movement where space or design calls for a simple track solution.
The SD Single Track, 16 foot anodised profile uses drill holes already provided for ease of attachment, so fastening positions are preset along the aluminium body and do not need separate marking before mounting. This predefined pattern supports repeatable installation when multiple tracks are used side by side in a project, because each track references the same hole spacing during attachment to the supporting structure. Recommended 4.8 x 32 mm oval head screws match the manufacturer guidance, so the screw shank and head style relate directly to the provided holes and track thickness when attaching through the aluminium. As part of sliding door hardware from Hettich America Corporation, the mounted track then functions as the base rail guiding compatible sliding door components.
The SD Single Track, anodised sliding door hardware, belongs to the builders hardware and sliding door hardware category, which positions it for woodworking and related construction projects where sliding fronts are required. Its 16 foot length gives a single continuous path, so it suits long cabinet runs or extended openings where one-piece guidance is preferred instead of segmented rails. The aluminium material keeps the track structurally useful while limiting weight, which helps when aligning it along upper cabinets, tall casework, or overhead supports. Because drill holes are already provided for ease of attachment, the track is prepared for mounting directly onto suitable structural members in shop-fabricated or site-installed sliding assemblies.
The aluminium, anodised profile establishes a stable, treated running edge that supports consistent contact with sliding door components over time, which matters when doors cycle repeatedly and need predictable tracking along the same path. The 16 foot dimension reduces the need to join shorter pieces, which limits potential steps or misalignment points along the sliding route that could disrupt door motion. With drill holes already provided for ease of attachment, the fixing pattern helps keep the track straight during fastening, because each screw position pulls the profile into line with the supporting substrate. Recommended 4.8 x 32 mm oval head screws correspond to these holes and the track section, so the selected fasteners seat appropriately in the track and support secure retention. As a Hettich America Corporation sliding door hardware component, this SD Single Track can be specified wherever a single-channel guide is required to direct a compatible sliding door system.
The SD Single Track 16ft anodized is aluminium with an anodised finish, which provides a light but rigid base with a treated surface for consistent sliding door hardware contact.
The Hettich SD Single Track has a 16 foot length, which supports continuous sliding motion across long openings without breaks from track joints.
The aluminium sliding door track has drill holes already provided for ease of attachment, so fastening follows the preset hole pattern along the profile.
The SD Single Track, 16 foot anodised, specifies recommended 4.8 x 32 mm oval head screws, which suit the provided hole size and aluminium track thickness.
This sliding door hardware belongs to builders hardware and sliding door hardware categories, so it suits woodworking and construction projects using guided sliding fronts.
The SD Single Track, 16ft, anodised is manufactured by Hettich America Corporation, placing it within a recognized sliding door hardware line.
The SD Single Track, 16 foot anodised aluminium profile from Hettich America Corporation provides a defined sliding door hardware solution built around a continuous, anodised running surface. With drill holes already provided for ease of attachment and recommended 4.8 x 32 mm oval head screws, the track simplifies layout and fastening as part of builders hardware workflows. For woodworking and construction projects needing a single-channel, 16 foot sliding path, this sliding door track offers a clearly specified component ready to anchor compatible sliding door systems.
Sold In: 1 Each