2-3/8" Diameter x 34-1/2" High Rockwell Single Table Leg, Black Matte

Rockwell Single Table Leg For Stable Work Surfaces

Rockwell single table leg from Peter Meier, Inc. is a 2-3/8 inch diameter x 34-1/2 inch high leg that supports work surfaces and tables at a consistent height, which matters when setting up level counters, benches, or tables that align with adjacent cabinetry or tops.

The black matte finish on this Rockwell single table leg provides a dark, low-sheen look that helps the support visually blend under many tops, which is useful when the project design calls for a functional support that does not draw attention in commercial or residential spaces.

This 34-1/2 inch high table leg with a single leg configuration allows installers to support free-standing corners or open spans on work surfaces, which helps when layouts prevent using cabinet boxes or walls as the primary structural support for the surface.

The leg belongs to the table legs category for work surface and tables, so it is suited for use as a vertical support in that role, which helps streamline selection when specifying components from the same class on a job.

Key Rockwell Single Table Leg Details In Practice

• The 2-3/8 inch diameter on this table leg gives a relatively broad contact profile, which helps distribute load on the floor and under the mounting plate, supporting a solid feel under work surfaces.
• The 34-1/2 inch height positions work surfaces at a counter-style level when paired with typical top thicknesses, which matters when aligning new tops with existing cabinetry, appliances, or adjacent work zones.
• The black matte finish provides a uniform dark appearance, which helps coordinate with darker tops, hardware, or trim while minimizing light reflection in work areas or front-of-house installations.
• Being a single table leg lets it serve as an isolated support point, which is practical for peninsula ends, desk returns, or table corners where structural support is needed without additional framing.
• The leg is listed within the work surface and tables product class, which supports use in table, counter, and bar-style applications where a dedicated structural leg is needed.

Mounting And Adjustment Details For This Table Leg

This Peter Meier table leg uses a 4 9/16 inch (116mm) square mounting plate, which provides a broad interface to the underside of the surface, helping spread forces over a wider area and assisting with secure attachment on many solid tops or frames.

The 1 1/8 inch adjustable foot integrated into this leg allows height fine-tuning within that range, which is useful for leveling on uneven floors or to bring the finished surface into alignment with adjacent counters without altering the main leg tube.

This mounting plate combined with the adjustable foot means the leg can be positioned, fastened at the top, and then fine-adjusted at the bottom, which supports a straightforward workflow when setting pitch and eliminating rocking on completed installations.

Using This Black Matte Leg Across Heights And Layouts

Where This Table Leg Fits In Work Areas

The web description notes that Rockwell legs are available for table, counter, and bar heights, which indicates this design family is intended for a range of vertical work surfaces, helping installers keep a consistent visual style across mixed-height projects.

This specific 34-1/2 inch high version fits into the counter-height portion of that range, which matters in kitchens, labs, or shop spaces where counters must meet established ergonomic or code-related working heights using a repeatable leg size.

The 2-3/8 inch diameter forms a compact yet substantial tube profile, which suits applications where space under the top is somewhat limited but still needs a support that looks proportional to thicker counters or work surfaces.

The black matte finish helps this table leg work beneath dark laminate, composite, or wood tops in both commercial and residential work areas, which supports visually unified runs of surfaces when the same finish is repeated on multiple legs or stations.

Being categorized under work surface and tables means this leg is positioned for benches, tables, and similar surfaces, which helps integrate it into shop layouts, office tables, or project islands that demand a straightforward vertical support solution.

Details That Support Level, Repeatable Installations

The 4 9/16 inch (116mm) square mounting plate creates a predictable footprint for layout under tops, which helps installers pre-drill or mark consistent leg positions across multiple units, reducing layout time and supporting symmetry from one surface to the next.

The square geometry of the mounting plate also assists with aligning the leg relative to edges or corners of the work surface, which is useful when parallelism and visual straightness are important in conference tables, counters, or shop benches.

The 1 1/8 inch adjustable foot offers a measurable adjustment window, which lets installers compensate for floor variances within that range instead of altering leg length, supporting repeatable setups across different rooms or floor conditions in a building.

Because the foot adjustment is built into the leg, fine-tuning can be done after the surface is set to approximate height, which helps dial in final level or pitch without disturbing the top mounting interface.

The manufacturer part number 960-8S-02 uniquely identifies this Rockwell single table leg configuration, which matters when re-ordering for additional stations or matching existing installations across future phases of a project.

Common Questions About This Rockwell Table Leg

Selecting This Leg For Your Next Work Surface

This black matte table leg with a 2-3/8 inch diameter tube, 34-1/2 inch height, 4 9/16 inch square mounting plate, and 1 1/8 inch adjustable foot provides a defined, repeatable support setup for work surfaces and tables that need counter-height structure from a single vertical leg.