2-3/8" Diameter x 34-1/2" High Rockwell Single Table Leg, Brushed Steel
Description
Rockwell Single Table Leg For Work Surfaces
Rockwell single table leg gives a straightforward way to support work surfaces and tables using a proven Peter Meier, Inc. component. This leg is 2-3/8 inches in diameter and 34-1/2 inches high, so it suits standard table-height applications where a consistent finished height across multiple legs matters. The leg is made in a brushed steel finish, which provides a clean, neutral look that ties in well with a wide range of work surface materials in shops, offices, or residential projects. As a single leg, it can be specified exactly where extra support is required, whether at corners, mid-span, or to stiffen a cantilevered section of a work surface.
Key Rockwell Table Leg Details That Matter
- The Peter Meier, Inc. Rockwell leg is 2-3/8 inches in diameter, giving a solid-looking support that works well under work surfaces and tables where visual balance and footprint are important.
- The 34-1/2 inch height matches table-height projects, which helps keep work surfaces level when pairing this leg with other supports designed for the same finished height.
- The brushed steel finish delivers a consistent metallic appearance, allowing the leg to blend into commercial, shop, or residential environments without drawing unnecessary attention.
- The Rockwell leg is available in table, counter, and bar heights, so a project can use the same design family across different working levels for a unified appearance.
- The leg is part of the Work Surface & Tables category and the Table Legs product class, making it a fit where dedicated leg supports are preferred over casework-only construction.
Mounting And Adjustment Details For Installers
The Rockwell single table leg uses a 4 9/16 inch (116mm) square mounting plate, which gives a defined footprint where the leg contacts the underside of the work surface. This square plate layout makes it straightforward to position the leg relative to edges or corners when laying out mounting locations. An adjustable foot with 1-1/8 inches of travel is built into the design, allowing the installed height of the leg to be tuned within that range. This adjustment helps compensate for irregular floors or minor work surface tolerances so the table or work surface can sit stable without rocking.
Using This Brushed Steel Leg In Real Projects
Where This Rockwell Single Table Leg Fits
This Rockwell leg is part of the Work Surface & Tables category and is identified as a table leg, so it fits projects where a defined support point is needed under a work surface. With a 34-1/2 inch height and 2-3/8 inch diameter, it suits table-height installations where a round steel leg is preferred instead of building a full cabinet support. The 4 9/16 inch (116mm) square mounting plate lets the leg be located under corners, along spans, or at interior points, depending on how the work surface is laid out. Because the brushed steel finish is neutral, it works in commercial shops, office workstations, or residential tables that use laminate, wood, or similar tops.
Details That Support Repeatable, Level Installations
The 1-1/8 inch adjustable foot built into this Rockwell leg gives a meaningful range to fine-tune the installed height of the support. That adjustment allows each leg on a multi-leg table to be set so the work surface carries load across all points rather than relying on shimming. The 4 9/16 inch square mounting plate provides a consistent reference when marking drill locations, helping every leg in a run land in the same relationship to the work surface edges. Using the same Peter Meier, Inc. Rockwell leg line in table, counter, and bar heights keeps geometry and mounting plate layout familiar across different projects. The brushed steel finish supports repeatable aesthetics from job to job, since the leg appearance stays constant even when work surface materials change.
Common Rockwell Single Table Leg Questions
What height projects suit this Rockwell single table leg?
The Rockwell single table leg is 34-1/2 inches high, so it suits standard table-height installations where a work surface is supported by legs rather than only by cabinetry.
How does the adjustable foot on this table leg help?
The Rockwell single table leg has a 1-1/8 inch adjustable foot, which lets the installer fine-tune leg height to address floor variations and help the work surface sit stable.
What is the mounting interface on this Rockwell table leg?
The Rockwell single table leg uses a 4 9/16 inch (116mm) square mounting plate, giving a clear footprint for attaching the leg to the underside of a work surface.
What diameter is the Rockwell single table leg?
The Rockwell single table leg has a 2-3/8 inch diameter, providing a substantial round profile that visually and structurally suits many table and work surface designs.
How does the brushed steel finish work in finished spaces?
The Rockwell single table leg uses a brushed steel finish, giving a neutral metallic look that pairs well with various work surface materials in commercial or residential settings.
What family of heights are available in this Rockwell leg line?
The Rockwell leg line is available in table, counter, and bar heights, allowing projects to use similar-looking legs at different working levels.
Selecting This Rockwell Leg For Your Next Surface
This Rockwell single table leg from Peter Meier, Inc. combines a 34-1/2 inch height, 2-3/8 inch diameter, and brushed steel finish for table-height work surfaces. The 4 9/16 inch square mounting plate and 1-1/8 inch adjustable foot support straightforward layout and height tuning on site. For projects that rely on discrete legs rather than full cabinet bases, this leg provides a defined support point within the Work Surface & Tables category. Use this Rockwell single table leg when a consistent, familiar mounting layout and finish across table-height installations is important.