Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rockwell single table leg stainless steel construction provides a rigid support post for work surfaces and tables where a clean metal look is required. The 2-3/8 inch diameter round leg creates a compact footprint that carries vertical loads while staying out of the way of knees and storage. A 34-1/2 inch high leg establishes a fixed support height that suits work surfaces built to that dimension, keeping tops level with surrounding cabinetry built to match. The stainless steel material resists everyday shop and project environments, so the leg continues to present a consistent appearance during service. As a single table leg, this Peter Meier, Inc. component functions as a structural support element at corners or intermediate points, making it useful when cabinets do not run to the floor. The defined dimensions and material allow installers to plan layouts and cuts with clear size expectations.
The 4 9/16 inch square mounting plate establishes a defined interface between the 34-1/2 inch Rockwell leg and the underside of the surface, so installers can locate fastener positions consistently across multiple legs. The square shape assists when aligning the leg parallel to table edges or cabinet faces, because edges of the plate can be referenced to the layout. The 1 1/8 inch adjustable foot provides a vertical range relative to the fixed leg tube, enabling small changes when floors are out of level. This adjustment allows the surface supported by the leg to be brought into plane with adjacent worktops built to the same nominal height.
The 2-3/8 inch diameter x 34-1/2 inch high Rockwell single table leg operates in the work surface and tables category, placing it in applications where a defined-height metal support is required beneath a top. Its stainless steel construction ties visually to stainless-intensive environments, allowing the leg to serve in exposed locations where the support remains visible during daily use. As a table leg within the work surface and tables class, the component assists in carrying loads from tops used for tasks such as preparation, assembly, or layout whenever the structure above does not extend fully to the floor. The single leg format lets installers position this Peter Meier, Inc. part at isolated corners or mid-span points, combining with other structural elements to stabilize the overall assembly. The known 34-1/2 inch height factors into system design because adjoining cabinetry and supports can be constructed to meet that vertical dimension for a unified surface plane.
The 4 9/16 inch square mounting plate on the 960-8S-SS table leg distributes attachment forces over more of the underside of the top, helping the joint resist twisting when the surface is pushed from the side. This wider bearing area supports stability in service because the connection is not concentrated at a narrow point. The 1 1/8 inch adjustable foot contributes to installation outcomes by introducing a controlled height range beneath the 34-1/2 inch leg body, which aids in compensating for minor floor variation while keeping the leg tube itself at a predictable dimension. This relationship between fixed leg length and adjustable foot helps installers tune final surface height without altering the leg structure. The 2-3/8 inch diameter tube also affects stability because a round profile of that size offers a balance between compactness and resistance to lateral deflection when the table or work surface is used.
The Rockwell single table leg is 34-1/2 inches high, so it supports work surfaces designed around that fixed leg length as the primary vertical dimension.
The table leg has a 2-3/8 inch diameter, giving it a compact footprint at the floor while still providing a stable support post under the surface.
The 1 1/8 inch adjustable foot allows small height changes at the bottom of the leg, helping align the supported surface when floors are uneven.
The 4 9/16 inch square mounting plate spreads load and fastening points over more of the underside of the top, helping resist twisting and racking at the joint.
The 960-8S-SS Rockwell leg is stainless steel, so it functions as both a structural support and a visible metal design element under the work surface.
This single table leg sits under the work surface or table top as a vertical support point, typically at corners or intermediate locations needing added bearing.
The 2-3/8 inch diameter x 34-1/2 inch high Rockwell single table leg brings a defined stainless steel support element to work surfaces that match its height. With its 4 9/16 inch square mounting plate and 1 1/8 inch adjustable foot, the leg provides a clear connection method and on-site height tuning for aligning tops in a run. For projects needing a stainless post of this size and configuration, this Peter Meier, Inc. component offers known dimensions that can be integrated into layout drawings and cut lists efficiently.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CM960-DECO-SS Mfr# 960-DECO-SS | 2-3/8" Diameter Decorative Foot, Stainless Steel |
