2-3/8" Diameter x 40-3/4" High Rockwell Single Table Leg, Black Matte

Rockwell Single Table Leg For Work Surfaces

Rockwell single table leg defines a straightforward way to support work surfaces where a single post is the right structure. The 40-3/4 inch high Peter Meier, Inc. leg sets the height for tables, counters, or bars that match this dimension, so layouts can follow a consistent line across runs of surfaces. The 2-3/8 inch diameter steel tube profile provides a compact footprint under the top, which helps when clearance for knees, cabinets, or equipment is tight along the underside. The black matte finish keeps reflections down on the leg, which can matter around bright task lighting or glass tops. The 1 1/8 inch adjustable foot built into the leg lets an installer dial in height within that range, helping compensate for floor unevenness while still holding the top level over its span. The 4 9/16 inch square mounting plate at the top creates a defined interface area to the underside of the work surface, which helps spread loads over a broader patch.

Key Rockwell Table Leg Details For Projects

• The 40-3/4 inch high Peter Meier, Inc. Rockwell leg establishes a fixed reference height for a run of tops, which simplifies layout when aligning multiple work surfaces or matching existing furniture lines in the same space.
• The 2-3/8 inch diameter tube keeps the support compact under the surface, which helps when routing cables, placing cabinets, or leaving clear knee space and still delivering a clear support post where needed.
• The black matte finish on the leg reduces visible glare under strong lighting, which can help the support visually recede so the eye stays on the work surface or front edge rather than the support structure.
• The 1 1/8 inch adjustable foot at the base provides height tuning within that range, allowing the installer to bring the work surface to level even when the floor has dips or slopes.
• The 4 9/16 inch (116mm) square mounting plate at the top offers a defined screw pattern area, which helps distribute load into the underside of the work surface over a wider patch than the tube diameter alone.

Mounting And Height Setup For This Table Leg

The 4 9/16 inch square mounting plate at the top of this Rockwell single table leg creates the main interface to the underside of the surface, so the installer works with a predictable plate size and shape when laying out hole locations. The 40-3/4 inch overall height of the leg, combined with the 1 1/8 inch adjustable foot, lets the installer fine-tune the final working height by that amount, which is useful when tying into existing counters or bars set off an established reference. The 2-3/8 inch diameter tube transitions cleanly to the adjustable foot, which keeps the contact point to the floor centered under the support and makes height adjustments straightforward from one point at the base.

Using The Rockwell Single Leg In Real Work

Where This Rockwell Table Leg Fits Best

The Rockwell single table leg from Peter Meier, Inc. is defined by its 40-3/4 inch height, which positions it for work surfaces that are planned around that dimension in table, counter, or bar layouts. When a project calls for a run of tops at a consistent height, this leg provides a fixed reference that can be repeated at each support point along the span. The 2-3/8 inch diameter tube allows the leg to fit under narrow tops, where a larger post could crowd the underside or conflict with cabinets or framing. The black matte finish helps the support visually sit back under darker tops or commercial fixtures, which matters in retail, office, or shop environments where the focus stays on the surface and stored items. Because the leg is sold as a single unit, it can be placed exactly where a designer or installer wants an isolated support, whether at a corner, mid-span, or end of a peninsula-style surface.

How Adjustments And Mounting Support Accuracy

The 1 1/8 inch adjustable foot on this Rockwell single table leg gives the installer a built-in method to correct for floor variation without altering the fixed top height of 40-3/4 inches more than that adjustment range. That adjustability lets each leg take up minor differences in slab flatness across a long run, helping the surface sit level while maintaining contact at all supports so loads do not concentrate at one point. The foot adjustment at the base means corrections occur at the floor interface, keeping the mounting plate tight to the underside of the surface once it is fastened. The 4 9/16 inch square mounting plate concentrates screw locations in a predictable grid, which helps when working on prefinished or laminated tops where screw placement must avoid certain areas. That defined plate size supports repeatable layouts on multiple tops, so hole patterns can be transferred from one surface to another with consistent results.

Common Questions About This Rockwell Table Leg

Selecting This Rockwell Leg For Your Project

The 2-3/8 inch diameter x 40-3/4 inch high Rockwell single table leg in black matte brings together a defined height, compact tube size, and a 4 9/16 inch square mounting plate, so projects needing a focused support post at that dimension have a clear option. The 1 1/8 inch adjustable foot contributes height flexibility within its range, which supports final leveling on site. For work surfaces, counters, or bar tops planned around this height and tube diameter, this Peter Meier, Inc. leg from Wurth Baer Supply offers a straightforward path to stable, repeatable support.