2-3/8" Diameter x 40-3/4" High Rockwell Single Table Leg, Brushed Steel

Rockwell Single Table Leg For Clean Work Surfaces

Rockwell single table leg defines this Peter Meier, Inc. support as a dedicated leg for work surfaces and tables, so it serves well when you need a single structural support under a top. The 40-3/4 inch high dimension identifies it as a taller leg that suits table, counter, or bar height layouts described in the product information, giving flexibility for different project heights. The 2-3/8 inch diameter round profile creates a slim support footprint, which matters when you want strength without a bulky leg taking up knee space. The brushed steel description specifies the visible finish, so the leg presents a neutral, professional look that fits many shop or commercial interiors. The manufacturer part number 960-1S-ST ties directly to this configuration, which matters when you are matching existing installations or reordering identical legs across multiple stations.

Key Rockwell Leg Details That Support Your Build

• The 40-3/4 inch height lets this leg serve table, counter, and bar heights noted in the description, so one model can match different top elevations across a run of work surfaces.
• The 2-3/8 inch diameter defines a compact round footprint, which keeps the leg out of the way under the top while still marking a clear structural support location during layout.
• The brushed steel finish establishes a consistent metallic appearance, so the leg coordinates easily with typical shop fixtures and metal hardware in woodworking environments.
• The part number 960-1S-ST from Peter Meier, Inc. precisely identifies this leg, helping you align specifications when you repeat the same support design on future projects.
• The square mounting plate mentioned in the product description provides a defined interface at the top of the leg, so you have a clear zone for positioning under the work surface.

Mounting And Foot Adjustment For This Table Leg

The 4 9/16 inch (116 mm) square mounting plate at the top of the Rockwell single table leg defines a fixed, flat interface where the leg meets the work surface, which simplifies layout when you are marking positions under a table, counter, or bar top. The 1 1/8 inch adjustable foot built into the leg provides vertical take-up at the floor, allowing you to fine-tune overall height relative to uneven flooring conditions and align multiple legs to the same top. This combination of a defined mounting plate at the top and an adjustable foot at the bottom creates a clear adjustment range, which matters when you want the finished surface to sit level across the entire installation.

How This Brushed Steel Leg Performs In Use

Where This Rockwell Single Table Leg Fits Best

This Rockwell single table leg belongs in work surface and tables applications, as identified by its category, so it is suited to projects where you are supporting a top rather than building a full base cabinet. The 40-3/4 inch height lines up with table, counter, and bar heights referenced in the description, giving you enough length to work with different top thicknesses while still reaching those finished elevations. The 4 9/16 inch (116 mm) square mounting plate defines the contact area under the top, which helps when spacing legs along a longer surface or at corners. The 2-3/8 inch diameter keeps the leg visually light, so it can sit at exposed corners on islands or peninsulas without dominating the design. The brushed steel finish allows this leg to integrate smoothly with metal-framed chairs, foot rails, or other brushed components around the same installation.

Height Adjustment And Layout For Consistent Results

The 1 1/8 inch adjustable foot at the bottom of the leg gives a measurable adjustment zone, so you can bring a run of legs into the same plane even when the subfloor varies slightly from one end of the room to the other. This matters when you want a straight, level edge on counters or bar tops supported by several Rockwell single table legs, because the adjustment can be used to correct small height differences after the tops are set. The square mounting plate at 4 9/16 inches (116 mm) across provides a predictable footprint under the surface, which helps when you are aligning legs with framing or structural rails in the top. The clearly stated 40-3/4 inch overall height works together with the adjustable foot range, so you can plan finished heights by combining leg length, foot adjustment, and top thickness without guesswork.

Common Questions About Rockwell Single Table Leg Use

Selecting This Leg For Your Next Work Surface

The Rockwell single table leg from Peter Meier, Inc. combines a 40-3/4 inch height, 2-3/8 inch diameter, and brushed steel finish to support work surface and tables projects with a clear, defined geometry. The 4 9/16 inch (116 mm) square mounting plate and 1 1/8 inch adjustable foot give you predictable interfaces at both top and floor, which matters when you want level, repeatable results on table, counter, or bar height installations. For projects managed through Wurth Baer Supply, this leg and its 960-1S-ST identifier provide a straightforward way to specify and repeat the same support layout across multiple workstations or service areas.