2-3/8" Diameter x 40-3/4" High Rockwell Single Table Leg, Stainless Steel

Rockwell Stainless Single Table Leg For Worktops

Rockwell leg single 40.75 H 2.36 DIA SS identifies a Peter Meier, Inc. table leg built for work surface and table applications, so you get a defined support point sized for typical worktops and cabinetry-based installations in shops or residential projects. The 2-3/8 inch diameter round profile concentrates strength into a compact footprint, which helps when you need support without giving up cabinet or knee space. The 40-3/4 inch high design sets a consistent starting height for elevated work surfaces, and that fixed height simplifies layout when matching existing benches or tall counters. This leg is part of the Rockwell line in the Work Surface & Tables category, aligning it with table and work surface support tasks instead of general furniture parts. The stainless steel construction provides a hard, uniform surface that tolerates typical shop, kitchen, or commercial wear where metal legs are preferred for stability and appearance.

Key Rockwell Table Leg Details For Projects

• The 40-3/4 inch high measurement defines the leg length, which helps you match table, counter, or bar height requirements without custom fabrication or on-site cutting.
• The 2-3/8 inch diameter round leg size concentrates support in a small footprint, which leaves more usable under-table space for cabinets, storage, or seating.
• The 1 1/8 inch adjustable foot offers vertical adjustment range, which helps level the work surface when floors are uneven or when fine-tuning the height relative to adjacent tops.
• The 4 9/16 inch (116mm) square mounting plate provides a broad interface at the top of the leg, which spreads the load into the underside of the work surface for added stability.
• The stainless steel material gives the leg a rigid metal structure, which supports use in environments where a metal finish and solid feel are preferred for work surfaces and tables.

Mounting And Height Adjustment For This Table Leg

The 4 9/16 inch square mounting plate at the top of this Peter Meier table leg defines a clear attachment zone, so you can plan hole layouts and reinforcement on the underside of a table or work surface. With a plate sized at 116mm, the load from the leg spreads over a wider area, supporting stable installations on typical wood or composite tops used by woodworkers. The 40-3/4 inch high leg dimension combines with the 1 1/8 inch adjustable foot to create a practical adjustment window, so you can dial in finished height and compensate for floor variation while keeping the leg in its intended design range. Because the leg sits in the Work Surface & Tables category and Table Legs product class, it is tailored for fixed-height support rather than mobile or folding setups, which suits permanent benches, counters, and similar fixtures.

Using The Rockwell Stainless Leg In Real Builds

Where This Peter Meier Table Leg Fits Best

This Peter Meier, Inc. Rockwell single table leg is identified for Work Surface & Tables use, which positions it as a support element for fixed tops in woodworking shops, commercial spaces, and residential projects. At 40-3/4 inches high, the leg supports elevated surfaces that sit above standard desk height, which suits tall workbenches, standing-height tables, or counter-style tops along walls or islands. The 2-3/8 inch diameter round form keeps the profile compact, so it fits well at corners or mid-span positions where clearance for cabinets or knees is a priority. Because the mounting plate measures 4 9/16 inches square, it pairs effectively with broader work surfaces, allowing the load from heavier tops to transfer into a stable bearing area. The stainless steel construction coordinates with other stainless components in a room, which helps when you want visual consistency across legs, pulls, and exposed hardware on a project.

How Rockwell Leg Details Support Repeatable Results

The defined 40-3/4 inch height of this Rockwell stainless leg gives you a reliable baseline when laying out multiple work surfaces, which simplifies repeating the same elevation across a run of cabinets or modular benches. The 1 1/8 inch adjustable foot adds fine-tuning capability at the floor, so small height changes happen at the bottom of the leg rather than through shimming between the plate and the top. That adjustment feature helps you keep the square 4 9/16 inch mounting plate tight to the underside of the surface, improving contact and load transfer. The 2-3/8 inch diameter stays constant from top to bottom, which gives installers predictable clearances for doors, drawers, and under-table storage planned around the leg. As a single table leg identified by part number 960-1S-SS, it can be specified repeatedly in drawings and material lists, supporting consistent ordering and field installation on multi-station projects.

Common Questions About This Rockwell Stainless Leg

Selecting This Rockwell Leg For Your Next Surface

The Rockwell leg single 40.75 H 2.36 DIA SS from Peter Meier, Inc. brings a defined 40-3/4 inch high, 2-3/8 inch diameter stainless steel support into table and work surface projects where consistent elevation matters. With its 1 1/8 inch adjustable foot and 4 9/16 inch square mounting plate, it offers practical leveling and load distribution for worktops served by the Work Surface & Tables category. For projects ordered through Wurth Baer Supply, specifying manufacturer part 960-1S-SS helps align estimating, purchasing, and installation around the same Rockwell table leg standard.