
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rockwell single table leg gives a fixed 40-3/4 inch high support point that anchors work surfaces, so installers can hit target heights on custom tables, counters, or bars using a consistent reference leg. The 2-3/8 inch diameter profile concentrates strength into a compact footprint, which helps carry vertical loads without eating up knee space or interfering with cabinet layouts under the top. Aluminum silver construction keeps the leg lightweight while still supporting rigid structures, which matters when handling larger tops or working solo on site. The single-leg format lets you place support exactly where the surface needs it, such as corners or mid-spans, instead of being locked into prebuilt frames. A consistent branded leg from Peter Meier, Inc. helps maintain the same look and geometry across multiple rooms or phases of a project.
The 4 9/16 inch square mounting plate on this Rockwell single table leg gives a clearly defined footprint when laying out fastener locations on the underside of a top, which speeds drilling and keeps the pattern consistent from leg to leg. With the base section standing 40-3/4 inches high and a 1 1/8 inch adjustable foot under it, you can dial in working height within that adjustment range, which is helpful when tying into uneven floors or existing counters. The 2-3/8 inch diameter carries loads along a focused centerline, which supports tops without demanding extra bracing at the connection point.
This Rockwell single table leg works anywhere a 40-3/4 inch base height suits the layout, because the 1 1/8 inch adjustable foot gives enough travel to match small variations in floor height across a run. In work surface and table builds, the 2-3/8 inch diameter provides a solid visual and structural support at corners or intermediate points, which helps keep long tops from feeling springy when loaded. The 4 9/16 inch square mounting plate behaves like a stable interface between leg and top, so the panel above can be engineered around a known plate size. The aluminum silver finish pairs cleanly with many work surface materials, which is useful when the leg is exposed in labs, offices, or shop tables where appearance and function both matter.
The fixed 40-3/4 inch body height plus the 1 1/8 inch adjustable foot keeps height settings predictable, which reduces trial-and-error when leveling multiple legs under one surface. Installers can set the leg roughly by cut sheet, then use the adjustable foot to fine tune, which shortens time spent chasing wobble across long counters. The 4 9/16 inch square mounting plate gives four clear reference edges, which simplifies squaring the leg to the cabinet or edge of the top and helps maintain clean alignment across several legs. Because the leg is a single, defined component from Peter Meier, Inc., repeat projects can reuse the same part number 960-1S-71, which simplifies ordering and keeps replacement or expansion using the same geometry and finish. The 2-3/8 inch diameter also keeps fastener positions away from the edge of most tops, which supports long-term holding power at the connection.
The Rockwell single table leg stands 40-3/4 inches high with a 1 1/8 inch adjustable foot, so it supports surfaces in that general range where extra foot travel handles minor floor differences.
The 2-3/8 inch diameter gives a compact but substantial column, which carries vertical loads effectively while taking up limited under-surface space around knees or storage.
The 4 9/16 inch square mounting plate spreads forces into the work surface, which improves stability at the connection and helps keep the top from shifting under load.
The 1 1/8 inch adjustable foot lets you fine tune leg length within its range, which helps bring all legs into firm contact so the surface will not rock.
The aluminum silver finish gives a neutral, technical look, which helps the leg coordinate with typical hardware and work surface materials in shops, offices, or labs.
Manufacturer part number 960-1S-71 uniquely identifies this Rockwell leg, which helps repeat the same size, finish, and mounting details across future projects.
The 40-3/4 inch height, 2-3/8 inch diameter column, and 4 9/16 inch square mounting plate on this Rockwell single table leg from Peter Meier, Inc. combine into a repeatable support solution that fits work surface and table builds needing that range. The 1 1/8 inch adjustable foot gives enough movement to level tops across slightly irregular floors, while the aluminum silver finish keeps the support visually clean in exposed installations. Using the same part number 960-1S-71 through Wurth Baer Supply ties multiple projects to one proven geometry. Put this leg into your layout wherever a defined, stable point of support is required under a work surface or table.
Sold In: 1 Each