3" Diameter x 28" High Rockwell Single Table Leg, Aluminum Silver
Description
3 Inch Diameter 28 Inch Table Leg For Stable Support
3 inch diameter 28 inch table leg defines this Rockwell single table leg as a sturdy support option for work surfaces and tables where a substantial leg footprint is needed for stability. The 28 inch high Rockwell leg creates a standard table-height support, which suits many work surface and table builds that rely on consistent height across multiple legs. The leg is identified as a single table leg, so it serves as an individual support that can be positioned where structural reinforcement is required on a table or work surface layout. The aluminum silver finish gives the leg a clean, neutral appearance that coordinates with a wide range of work surface materials in cabinet shops, offices, or project spaces. The product is part of the Work Surface & Tables category under table legs, so it is aimed at applications where a fixed-height leg forms part of the main structural system.
Rockwell Single Table Leg Details That Matter
- The 3 inch diameter cylindrical leg body spreads load over a wider profile, which supports table and work surface projects that benefit from solid-feeling vertical supports.
- The 28 inch high dimension matches common table-height applications, which helps installers align multiple legs to create a uniform work surface level across a run of tables.
- The aluminum silver description signals a metal leg with a silver tone, which works well where a metallic look complements laminate tops or other work surface materials.
- Being classified under Work Surface & Tables in the table legs product class ties this component specifically to table and workbench builds rather than general-purpose framing.
- The branding by Peter Meier, Inc. and the Rockwell designation identify the leg as part of a known line, which helps shops match existing installations by product family and appearance.
Mounting Plate And Adjustable Foot For On-Site Fit
The Rockwell leg uses a 4 9/16 inch (116 mm) square mounting plate, which provides a broad interface area against the underside of the work surface so the load is transferred across a larger footprint. This plate-based connection helps installers position the leg accurately at corners or intermediate points on the top where a defined plate outline simplifies layout. The 1 1/8 inch adjustable foot built into the leg adds vertical travel at the floor contact point, which helps installers fine-tune final height when floors vary in level. That adjustable range supports practical height alignment across several legs under one top so the work surface sits steady with even bearing at all points.
Using The Rockwell Leg In Real Projects
Where This Rockwell Single Table Leg Fits
The Rockwell leg is described as a table leg for work surface and table applications, so it fits projects where a fixed-height support holds up a horizontal top. At 28 inches high, the leg matches common table-height requirements, so it works on standard work tables used in shops, offices, and utility areas where users sit or stand at a conventional table level. The 3 inch diameter profile means the leg presents as a substantial cylinder under the top, which suits layouts where a stronger visual and structural presence is desired compared with very slim supports. Being a single leg solution, it can be positioned at table corners, intermediate support points, or under overhanging sections that need added strength, allowing installers to build out different table configurations around a consistent component.
How Adjustable Foot And Plate Support Alignment
The 1 1/8 inch adjustable foot gives this table leg vertical adjustment at the floor end, which directly helps installers deal with uneven or sloped floors that would otherwise cause wobble. By dialing the foot within its adjustment range, each Rockwell leg can be set so that the 28 inch nominal height aligns across all supports, creating a level top even when the substrate varies. The 4 9/16 inch square mounting plate concentrates attachment points into a predictable geometry, which simplifies drilling patterns on the underside of the work surface and supports repeatable shop setups when multiple tops are produced. That square format also makes it straightforward to orient the leg consistently along the table edges for a uniform appearance. Together, the adjustable foot and square plate support repeatable results when the same leg is used across a series of tables in a project or facility.
Common Questions About This Rockwell Table Leg
What are the key dimensions of this Rockwell table leg?
The Rockwell leg is 28 inches high with a 3 inch diameter, so it provides a standard table-height support with a substantial cylindrical profile for work surfaces and tables.
How does the adjustable foot help during installation?
The Rockwell leg has a 1 1/8 inch adjustable foot, letting installers fine-tune leg height at the floor to compensate for uneven surfaces and reduce table wobble.
What is the size of the mounting plate on this leg?
The Rockwell table leg uses a 4 9/16 inch, or 116 mm, square mounting plate, giving a broad contact area under the top for stable, predictable mounting locations.
What type of applications is this table leg designed for?
The Rockwell single leg is categorized for work surface and table use, so it is intended as a structural support under tables, counters, and similar horizontal tops.
Who manufactures this Rockwell single table leg?
This table leg is produced by Peter Meier, Inc., identified by manufacturer part number 976-7S-71, which helps match specifications when ordering or replacing legs.
How does the aluminum silver finish work in shop environments?
The aluminum silver description means the leg presents a neutral metallic look that coordinates easily with many laminates and work surface finishes in shop or office settings.
Selecting This Rockwell Leg For Your Next Surface
The 3 inch diameter by 28 inch high Rockwell single table leg in aluminum silver combines a substantial cylindrical profile with a square mounting plate and an adjustable foot, giving installers a consistent structural component for work surfaces and tables. The defined height, plate size, and adjustment range all contribute to predictable layout and leveling results when multiple legs support a single top or a run of tops. For projects calling for a metal table leg with a standard table-height dimension and a neutral silver finish, this Rockwell model 976-7S-71 offers a clear, repeatable specification to build around on the job.