3" Diameter x 28" High Rockwell Single Table Leg, Chrome

3 Inch Diameter 28 Inch Table Leg For Stable Worksurfaces

3 inch diameter 28 inch table leg defines this Peter Meier, Inc. Rockwell single table leg as a sturdy support for work surfaces and tables. The 28 inch high dimension positions standard-height table and worktop projects, which streamlines layout when matching common surface heights across a run. The chrome finish identifies a bright, metal look that suits exposed table applications where the leg remains visible. A single leg format allows use as a corner support, intermediate support, or replacement on individual positions, giving flexibility for planning support points under tops. The Peter Meier, Inc. brand ties this leg to a dedicated furniture hardware manufacturer, which matters when matching style or staying within a known product family. The Rockwell naming and manufacturer part 976-7S-C1 let installers and shops reference this exact leg consistently in drawings, cut lists, and reorders.

Key Rockwell Single Table Leg Details That Matter

• The 3 inch diameter tube creates a broad-bearing support profile, which distributes load over a wider footprint and helps reduce flex at the connection point under typical work surfaces.
• The 28 inch high measurement matches common table heights, which simplifies planning when aligning tops with other work surfaces or creating level runs along cabinets and freestanding tables.
• The chrome finish provides a metal look that suits visible installations, which helps when the leg must coordinate with other chrome elements such as pulls, trim, or exposed frames.
• The Rockwell single table leg design suits one-leg placement at corners or intermediate spans, which supports both new builds and targeted replacements on existing tables using similar legs.
• The stated work surface and tables category confirms the leg is intended for work surface and table support, which guides its use on tops in shop, office, or residential furniture layouts.

Mounting Plate And Adjustable Foot For Clean Installation

The leg uses a 4 9/16 inch, or 116 mm, square mounting plate, giving a defined footprint where the leg meets the underside of the top. That square shape provides clear edge references, which helps align the leg relative to top edges or corners during layout. The 1 1/8 inch adjustable foot at the base introduces height tuning within the leg assembly, allowing installers to fine-tune leg extension to match small floor variations. That adjustment zone helps bring multiple legs on the same run into the same load-sharing height, which is important for avoiding rock in tables and work surfaces. Together, the fixed 28 inch tube and adjustable foot set a predictable height range, simplifying repeat installations using the same Rockwell leg.

Using The Rockwell Chrome Leg In Real Projects

Where This Peter Meier Table Leg Fits Best

The Peter Meier, Inc. Rockwell single table leg is classified under work surface and tables, directing its use toward tops that need point support rather than continuous bases. The 3 inch diameter tube gives the leg enough visual presence for open table designs where support elements are exposed below the top. With a 28 inch high structure, this leg supports table-height installations in workrooms, offices, or residential projects where a standard sitting or task-height surface is needed. The chrome finish keeps the leg visually aligned with metal-framed furniture, so it works on desks, light-duty workstations, and tables that share chrome pulls or frames. The single-leg configuration makes it suitable at corners of rectangular tops or as intermediate supports along longer tops when combined with additional legs or wall supports. Because the manufacturer part 976-7S-C1 is clearly identified, shops can specify this exact leg in project documentation, which simplifies coordination between design, purchasing, and installation teams.

How Mounting And Adjustment Support Repeatable Results

The 4 9/16 inch, or 116 mm, square mounting plate forms a defined interface to the underside of the work surface, so installers get consistent reference dimensions when repeating hole patterns or screw layouts across multiple tops. A square plate also makes it straightforward to align sides parallel with top edges, which is useful when maintaining uniform setbacks along a row of legs. The 1 1/8 inch adjustable foot at the bottom of the leg delivers a controllable range of height adjustment, which lets installers dial in final leg height without cutting the 28 inch tube. That adjustment at the floor side compensates for minor unevenness, which allows all legs under a top to share the load uniformly. Because this leg is specified as a Rockwell single table leg, it can be repeated across multiple projects with the same adjustment characteristics, helping shops establish standard jigs and processes for setting height and alignment. Using the same 3 inch diameter Rockwell leg across a fleet of tables also keeps visual and dimensional consistency, which supports clean, repeatable results in multi-station layouts.

Common Questions About This Rockwell Table Leg

Select This Chrome Rockwell Leg For Aligned Table Support

The 3 inch diameter x 28 inch high Rockwell single table leg in chrome from Peter Meier, Inc. provides a defined combination of tube size, height, and finish for table and work surface support. With its 4 9/16 inch square mounting plate and 1 1/8 inch adjustable foot, this leg offers a clear interface to the top and an adjustable interface to the floor. When a project calls for a chrome leg at standard table height with documented dimensions and part identity, this Rockwell leg gives a repeatable option that aligns design notes, shop drawings, and on-site installation.