3" Diameter x 28" High Rockwell Single Table Leg, Stainless Steel

3 Inch Rockwell Leg For Stable Work Surfaces

3 inch Diameter x 28 inch Rockwell Single Table Leg defines this component as a stainless steel support for work surfaces and tables, so it carries the load at a standard table height where a single structural leg is required. The stainless steel construction identifies it as a metal leg solution, which provides a rigid support element suitable for use under tables, counters, or similar surfaces that match its height. The 28 inch high dimension sets the finished surface height potential when combined with the adjustable foot, which matters when aligning a new work surface with existing cabinetry or other furniture. The single leg format designates it for use as a stand-alone support point, which is useful at corners, peninsulas, or mid-span positions where framing is not present. The Peter Meier, Inc. branding ties it to a recognized hardware manufacturer, which matters when matching parts across multiple projects or workstations.

Rockwell Leg Details That Support Daily Use

• The stainless steel Rockwell leg construction forms a solid metal column, which supports work surfaces in environments where a hard, cleanable support is preferred for tables, counters, or bar-height structures that match its series.
• The 3 inch diameter size creates a broad cylindrical footprint, which spreads loads over a wider area at the floor and mounting points, helping the leg perform as a substantial support under deeper or heavier tops.
• The 28 inch high dimension defines this version of the Rockwell leg as a table-height component, which fits common work surface layouts that target standard seated or workstation heights within the Rockwell height range.
• The 1-1/8 inch adjustable foot built into the leg provides vertical adjustment travel, which allows fine-tuning of surface height relative to uneven floors so table edges can align more cleanly with adjacent cabinetry or worktops.
• The 4-9/16 inch square mounting plate at the top of the leg establishes a defined interface area, which spreads the load into the underside of the top and offers multiple screw points for secure attachment to the work surface structure.

Mounting And Height Alignment For This Leg

The 4-9/16 inch square mounting plate identifies the top connection for this Rockwell leg, which gives installers a predictable flat surface to fasten against the underside of a table, counter, or bar top. The square geometry and defined size help position the leg footprint accurately near corners or setbacks while maintaining clearance for edge details. The 1-1/8 inch adjustable foot at the bottom of the leg introduces an adjustment range, which is valuable where floors are out of level because it lets the installer dial in the final leg length without cutting. The 28 inch high stainless steel body of the leg works together with this adjustable foot to create a table-height support, which is useful when aligning a new top with existing furniture or a run of cabinets in the same room.

Using The Rockwell Stainless Leg In Projects

Where This 28 Inch Rockwell Leg Fits Best

The 3 inch diameter stainless steel construction of the Rockwell Single Table Leg positions it well for use beneath work surfaces where a clean metal column is desired, such as table-height counters or work tables that coordinate with other metal components. The 28 inch high measurement defines it as suited to table-height layouts, which means it can support surfaces designed for seated work or dining when the top thickness and adjustable foot range are taken into account. The 4-9/16 inch square mounting plate at the top provides a defined zone under the surface, which is useful when laying out screw positions around edge profiles or under-surface framing members. Because the product is classified in the Work Surface & Tables category, it aligns with applications where the leg becomes a primary vertical support for tabletops rather than decorative trim.

Details That Help Achieve Consistent Install Results

The combination of the 28 inch high leg and the 1-1/8 inch adjustable foot creates a controllable overall height window, which helps installers synchronize multiple legs on the same run so the top sits level even when the floor varies slightly from side to side. The 3 inch diameter profile stabilizes the leg both visually and structurally, which can reduce flex at the outer corners of larger tops by offering a wide, steady contact point. The 4-9/16 inch square mounting plate introduces a repeatable interface size, which lets fabricators pre-drill mounting patterns in tops or jigs and know that each Rockwell leg in the same series will match that layout during installation. The stainless steel material defined in the description ties into jobs where metal table legs are part of the design intent, which can simplify coordination with other stainless components on the project and support a uniform appearance across multiple pieces.

Common Rockwell Stainless Table Leg Questions

Selecting This Rockwell Leg For Your Project

The 3 inch Diameter x 28 inch High Rockwell Single Table Leg in stainless steel offers a clearly defined height, diameter, and mounting plate size, which simplifies planning when supporting table-height work surfaces. The 1-1/8 inch adjustable foot built into the leg gives you workable tolerance for leveling and final height tuning at install time. Combined with the 4-9/16 inch square mounting plate and single-leg format, these details help you specify this Peter Meier, Inc. component confidently wherever a dedicated metal support is needed under a work surface or table.