3" Diameter x 28" High Rockwell Single Table Leg, Brushed Steel
Description
3 Inch Rockwell Table Leg For Stable Work Surfaces
3 inch Diameter x 28 inch High Rockwell Single Table Leg gives a fixed-height support point for tables and work surfaces where a 28 inch leg matches the planned working height. The 3 inch diameter design spreads the load over a broad steel tube, which helps the leg resist flexing when the surface is loaded. Brushed steel construction provides a hard metal support column that suits shop, office, or residential work areas where a steel leg is appropriate. The 28 inch height works in layouts built around standard table height, so tops, aprons, and other supports can be planned around that dimension. This Rockwell single table leg format serves locations where only one independent support is needed, such as corners, peninsulas, or overhangs that do not connect to traditional cabinet boxes.
Rockwell Leg Details That Support Daily Use
- The 3 inch diameter steel leg body creates a wide, rigid column, which helps the table or work surface feel solid under load and during side pressure in everyday use.
- The 28 inch high dimension provides a predictable leg length, which lets installers coordinate top thickness and glide setting to reach a standard finished work-surface height.
- The brushed steel finish on the Rockwell leg presents a neutral metal appearance, which integrates into many commercial or residential environments while still exposing a durable metal surface.
- The Rockwell single table leg format focuses support into one structural element, which fits layouts where a single leg carries a corner, extension, or free-standing end of a work surface.
Mounting Plate And Adjustable Foot For On-Site Fit
The leg assembly uses a 4 9/16 inch (116mm) square mounting plate, so the load transfers through a broad footprint at the underside of the top. That size plate spreads forces across more material, which can reduce stress on the fastening area during use. An adjustable foot with 1 1/8 inch of range at the bottom of the leg allows height tuning after the leg is mounted, giving the installer a way to compensate when the floor is uneven. That bottom adjustment helps bring multiple legs into the same plane so the work surface sits steady without rocking. Together, the square plate interface at the top and the adjustable foot at the floor give two defined points that simplify aligning the leg to the top and to the finished floor.
Using The 976-7S-ST Rockwell Leg In Projects
Where This Rockwell Table Leg Fits Best
The 3 inch Diameter x 28 inch High Rockwell Single Table Leg, identified as manufacturer part 976-7S-ST, matches projects that specify a single metal support at table height. The 28 inch dimension lets designers pair the leg with tops in typical thickness ranges to achieve a standard sitting-height table or similar work surface. In work rooms, shops, or offices, the brushed steel finish coordinates with other exposed metal components, giving a consistent appearance from leg to leg. Because this product is listed under Work Surface & Tables in the Table Legs product class, it sits naturally in layouts where the leg functions as one of several structural supports under a horizontal top. The single-leg format works well at outside corners or at positions where cabinetry does not reach the floor but a structural vertical is still required.
Why These Mounting Details Support Reliable Results
The 4 9/16 inch (116mm) square mounting plate on the Rockwell table leg defines a clear attachment zone under the surface, which helps installers position fasteners in a known pattern. This defined footprint concentrates drilling and fastening into a single, square layout, saving layout time when multiple legs are used in a straight line or grid. The adjustable foot with 1 1/8 inch of movement provides a built-in solution for final leveling, which reduces the need for shims under the leg during setup. That adjustability also supports fine-tuning height when matching an adjacent cabinet run or another table that sits in the same space. With a 3 inch diameter steel column above the plate, the load path from top to floor stays direct, helping the assembly respond predictably to everyday forces such as people leaning on the edge, rolling carts contacting the leg, or equipment resting on the surface.
Common Questions About The Rockwell Single Table Leg
What are the key dimensions of this Rockwell table leg?
The Rockwell Single Table Leg measures 28 inches high with a 3 inch diameter, so it supports standard table-height projects while providing a broad steel column for load carrying.
How does the adjustable foot on this table leg help during installation?
The Rockwell leg uses an adjustable foot with 1 1/8 inch of range, which allows the installer to fine-tune final height and compensate for floors that are not perfectly level.
What is the size of the mounting plate on this leg?
The Rockwell Single Table Leg uses a 4 9/16 inch, or 116mm, square mounting plate, providing a broad attachment area under the top to spread loads across more surface.
What material and finish does this Rockwell leg use?
The leg is described as brushed steel, giving a metallic support surface that matches many shop, office, or residential designs where exposed steel legs are appropriate.
Who manufactures the 976-7S-ST Rockwell table leg?
The 976-7S-ST Rockwell Single Table Leg is from Peter Meier, Inc., so it aligns with other components from the same manufacturer in the Rockwell leg family.
For what type of applications is this Rockwell leg listed?
This product is categorized under Work Surface & Tables and Table Legs, matching applications where a single vertical support carries part of a table or work surface.
Selecting This Rockwell Leg For Table Projects
The 3 inch Diameter x 28 inch High Rockwell Single Table Leg in brushed steel brings a defined 28 inch support height, a 4 9/16 inch square mounting plate, and an adjustable foot with 1 1/8 inch of range to table and work-surface layouts. Those combined details give installers a clear structural element to integrate into wood, laminate, or composite tops wherever a single vertical support is needed. For projects sourcing from Wurth Baer Supply, this Peter Meier, Inc. leg offers a consistent Rockwell-format component for new builds or updates that follow the same dimensional standard.