Rockwell Single Table Leg For Work Surfaces

Rockwell single table leg gives you a 3 inch diameter support at 34-1/2 inch height, so you can build or repair tables with a consistent, substantial base that feels solid in everyday use. This Peter Meier, Inc. leg is part of the Rockwell line, which helps keep leg selection consistent across a project when matching existing Rockwell supports. The black matte finish keeps reflections down and blends into darker design schemes, which is useful on commercial and residential work surfaces where a low-profile appearance is preferred. As a single table leg, it works in layouts where one leg must support a corner or edge, such as peninsula tops or auxiliary work surfaces. The 34-1/2 inch height pairs with the adjustable foot to fine-tune the working surface level, which helps compensate for small floor variations on installation day.

Key Rockwell Single Table Leg Details

• The 3 inch diameter tube provides a broad contact area, which helps the leg resist racking forces on work surfaces and tables that see regular side loading during use.
• The 34-1/2 inch height is suited to standard table and work surface builds, giving you a predictable finished height once you account for top thickness and the built-in adjustment range.
• The 1 1/8 inch adjustable foot lets you dial in leg length on uneven floors, which helps align multiple legs and reduces wobble without cutting or shimming the tube.
• The 4 9/16 inch, or 116mm, square mounting plate offers a generous footprint at the underside of the top, spreading load over more material so screw bite is better distributed.
• The black matte finish provides a muted appearance, which is useful where the leg should visually recede under darker tops or in installations that favor a low-gloss look.
• The manufacturer part number 976-8S-02 identifies this exact Rockwell leg, which helps match replacements or specify the same component across multiple stations.

Mounting Height, Foot Adjustment, And Fit

The 34-1/2 inch high Rockwell single table leg gives you a known starting dimension from floor to underside of the top, which simplifies layout when setting work surface elevations from a plan. The 1 1/8 inch adjustable foot adds vertical range at the floor contact, allowing you to raise or lower each leg within that span so finished tops line up even when the slab or subfloor is slightly out of level. The 4 9/16 inch (116mm) square mounting plate fixes the leg to the underside of the surface at a defined footprint, which organizes screw locations in a compact pattern and helps the leg stay square to the top once installed.

Using This Table Leg In Real Projects

Where The Rockwell Single Table Leg Works

This Rockwell single table leg is defined as a table, counter and bar heights product, so it suits a range of work surface elevations that share the same leg family. The 34-1/2 inch high configuration fits applications that need a leg in that range while staying visually coordinated with other Rockwell supports at different heights on the same job. The 3 inch diameter design is a practical choice on work surface and table projects where the leg is exposed and must look proportional under deeper or heavier tops. With its black matte finish, the leg fits installations that call for darker base elements, such as black laminate tops or dark solid surfaces where a matching tone simplifies the overall look. Because it is sold as a table leg within the Work Surface & Tables category, it matches projects built around dedicated workstations, utility tables, and similar surfaces that need fixed support points.

Details That Support Consistent Results On Site

The 1 1/8 inch adjustable foot on this Rockwell single table leg gives you practical tolerance when setting final height, which helps align multiple legs under longer runs of tops without re-drilling or swapping components. The 4 9/16 inch (116mm) square mounting plate keeps the connection zone predictable on every leg, so hole patterns at the underside of the top can be repeated from station to station. Using the same 3 inch diameter, 34-1/2 inch high, black matte Rockwell leg with part number 976-8S-02 across a project simplifies order lists and reduces variation during replacement, because installers and maintenance staff can call out one exact leg. The Rockwell designation in the SAP description ties this leg to the same family mentioned in the web description, which supports consistent selection when coordinating table, counter and bar heights in a single space.

Rockwell Table Leg Fit And Use Questions

Selecting This Rockwell Leg For Your Project

The 3 inch diameter x 34-1/2 inch high Rockwell single table leg in black matte from Peter Meier, Inc. provides a defined height, adjustable foot, and 4 9/16 inch (116mm) square mounting plate, giving you a clear specification when laying out work surface support. When your design calls for a Rockwell-family leg at this dimension with a black matte finish, this 976-8S-02 model from Wurth Baer Supply is the direct match to build around.