3" Diameter x 34-1/2" High Rockwell Single Table Leg, Aluminum Silver

3 Inch Diameter 34-1/2 Inch Table Leg For Stable Support

3 inch diameter 34-1/2 inch table leg describes this Rockwell single table leg from Peter Meier, Inc., giving you a defined size for planning work surfaces and tables. The 34-1/2 inch height sets a fixed starting point that suits table, counter, and bar height applications, so you can standardize layouts across different projects. The aluminum silver finish establishes a consistent visual look, which matters when matching multiple legs in an open workspace or commercial environment. As a single table leg, this piece serves where a specific support point is needed, allowing you to reinforce corners or spans without changing other structure details. Being in the table legs class, it is intended for work surface and table support, so it fits directly into woodworking and shop-fit projects that rely on known hardware lines.

Rockwell Single Table Leg Details That Matter On Site

• The available table, counter, and bar heights described for this Rockwell leg define a use range, so you can set up different workstations while staying within a coordinated height family across one job.
• The 1 1/8 inch adjustable foot built into this leg adds vertical adjustment, which helps you take up floor variations and dial in final height so surfaces meet surrounding cabinetry cleanly.
• The 4 9/16 inch (116mm) square mounting plate on top provides a defined interface size, which helps you lay out fastener patterns accurately when prepping tops or subframes in the shop.
• The single leg designation clarifies that this is one support point, giving flexibility to place it where additional strength is needed without changing other leg positions on the run.
• The aluminum silver description sets the finish tone, helping you keep a consistent appearance when combining several legs under one work surface or aligning with other silver-colored hardware.

Mounting Plate And Adjustable Foot Support Clean Installation

The 4 9/16 inch (116mm) square mounting plate gives this Rockwell single table leg a broad contact area, which spreads load across more surface and supports stable fastening into the underside of a top. The square shape with stated dimension lets you pre-drill or route mounting zones to repeatable measurements, saving layout time when building multiples. The 1 1/8 inch adjustable foot at the base adds vertical fine-tuning, allowing you to correct for uneven floors so the supported work surface sits solidly without rocking. With the overall 34-1/2 inch leg height working together with the adjustable foot range, you can align finished surfaces to adjacent tops within the stated height family while maintaining structural contact at all points.

Using This Peter Meier Table Leg In Real Projects

Where This Rockwell Single Table Leg Fits Best

This Rockwell leg with 3 inch diameter and 34-1/2 inch height is suited to work surfaces and tables where a defined support point is required under a top. The table, counter, and bar heights described for this leg give it a role across different stations, so the same style can appear at standard tables, taller counters, or higher bar-height surfaces depending on layout. Its place in the work surface and tables category aligns it with woodworking and shop fit-outs, where supports must match cabinet lines and equipment clearances. The aluminum silver finish makes it appropriate where a metallic look coordinates with other fittings, such as drawer pulls or metal-framed casework. Because it is a single leg, it can be added under overhangs, corners, or intermediate spans, giving structural help at specific locations while keeping the rest of the base design unchanged.

How Dimensions And Adjustability Support Repeatable Results

The 3 inch diameter of this Rockwell single table leg defines a substantial column size, which contributes to stable visual proportion and predictable footprint when you are laying out multiple legs along a run. The 34-1/2 inch stated height works as a reference dimension, so shop drawings and cut lists can rely on a known leg length when building tops or cabinet platforms around it. The 1 1/8 inch adjustable foot provides a fine adjustment band under that height, which helps you compensate for site variations and still land final surface levels right where drawings specify. The 4 9/16 inch (116mm) square mounting plate adds a fixed interface size, allowing jigs or templates to be built once and reused, improving consistency from one installation to the next. With manufacturer part number 976-8S-71 identifying this exact configuration, reordering for future phases or matching existing installations stays straightforward because the same dimensions and finish are tied to a single reference.

Key Questions About This Rockwell Single Table Leg

Select This Rockwell Leg For Defined Support Heights

The 3 inch diameter x 34-1/2 inch high Rockwell single table leg with aluminum silver finish gives you a clearly specified support for work surfaces and tables. With its 1 1/8 inch adjustable foot and 4 9/16 inch square mounting plate, it combines vertical adjustment with a defined mounting interface. The table, counter, and bar height description broadens where it can be used across one project. For projects that rely on repeatable dimensions and a consistent appearance, this 976-8S-71 leg provides a known component to build around.