Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3 inch diameter 34-1/2 inch table leg identifies this Rockwell single table leg as a substantial support for work surfaces and tables, which helps distribute vertical loads over a broad tube profile for stable installations. The 34-1/2 inch height sets this leg up for typical table or work surface applications where a full standing or seated height structure is needed. The leg is made in brushed steel, so the finish presents a clean, uniform metallic appearance that works well in visible installations where exposed supports are part of the design. This Rockwell leg is designated as a single leg, which lets you lay out support exactly where it is structurally required rather than relying on fixed frame kits. The product sits within the Work Surface & Tables and Table Legs categories, making it suitable when you are building or modifying tables, counters, or similar work areas.
The Rockwell single table leg uses a 4 9/16 inch, or 116 mm, square mounting plate, so the load from the 3 inch diameter tube spreads out over a broader footprint where it meets the underside of the work surface. This square plate creates a defined bearing area, which helps keep the connection stable when the table is moved or bumped during use. At the base, a 1 1/8 inch adjustable foot is specified, giving you height adjustment range directly at the floor contact point for leveling. That adjustability lets the 34-1/2 inch nominal height be fine-tuned on uneven floors so the work surface sits solidly without rocking. Together, the square plate and adjustable foot create a straightforward mounting and leveling approach using the leg as a structural component.
This Rockwell single table leg is described for table, counter, and bar heights, so the 34-1/2 inch size works across multiple work surface applications where different finished heights are needed. In table-height builds, the leg forms a primary corner or intermediate support beneath wood, laminate, or other rigid tops. In counter and bar height runs, the leg can function as a front or end support that carries overhanging sections while maintaining a consistent visual line from floor to top. The 3 inch diameter profile pairs well with larger tops because the proportion looks balanced under deeper work surfaces. The brushed steel finish suits installations in woodworking shops, commercial workrooms, or residential projects where exposed metal legs sit under counters, islands, or task tables. Because the Rockwell leg is single and not part of a fixed frame, it adapts to layouts where spans vary and you want to add support only where the structure demands it.
The 1 1/8 inch adjustable foot at the base of the leg creates a small but important tuning range that helps align multiple legs under one surface. That range lets you compensate when floors are out of level so the 34-1/2 inch nominal height translates into a flat working plane under real site conditions. The 4 9/16 inch (116 mm) square mounting plate sets a predictable interface size between leg and top, which simplifies repeated drilling or layout when you are installing several legs on a production run of tables or counters. With the 3 inch diameter tube running directly between plate and adjustable foot, the load path remains straightforward, giving you a clear sense of how the leg carries weight from the surface down to the floor. The specific manufacturer part number 976-8S-ST provides a consistent spec reference, which is useful when standardizing a shop build so replacements or expansions match the original legs in height, diameter, and finish.
The Rockwell single table leg is 34-1/2 inches high, which positions work surfaces in typical table or counter ranges where consistent working height is important across a run of tops.
This Rockwell leg uses a 4 9/16 inch, or 116 mm, square mounting plate, spreading load from the 3 inch diameter tube to the underside of the work surface for a stable connection.
The leg features a 1 1/8 inch adjustable foot, allowing the nominal 34-1/2 inch height to be fine-tuned so multiple legs can be leveled together on uneven floors.
The Rockwell single table leg is brushed steel, giving a consistent metallic appearance that suits visible table, counter, and bar-height applications where metal supports are exposed.
The leg is described for table, counter, and bar heights, so it fits work surfaces and tables in shops, residential projects, or commercial spaces needing a defined working height.
The 976-8S-ST part number uniquely identifies this 3 inch diameter, 34-1/2 inch high brushed steel Rockwell leg, which helps match specifications when adding legs on later builds.
The 3 inch diameter x 34-1/2 inch high Rockwell single table leg from Peter Meier, Inc. brings together a brushed steel finish, a 4 9/16 inch square mounting plate, and a 1 1/8 inch adjustable foot. That combination supports stable, level work surfaces across table, counter, and bar-height projects. Use this specific 976-8S-ST leg when you want a defined height, visible metal support that can be leveled precisely under your chosen top.
Sold In: 1 Each
