Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3 inch diameter 34-1/2 inch table leg describes a Rockwell single table leg from Peter Meier, Inc. that provides a substantial round support post, which helps distribute work surface loads evenly on cabinets, tables, or counters. The 34-1/2 inch high dimension defines the leg height as supplied, so installers can match standard work surface and table layouts without custom fabrication. This leg is identified as a single table leg, so it serves as an individual support point in multi-leg layouts for islands, desks, or workstations. The manufacturer part number 976-8S-C1 gives a precise reference for reorders and matching existing Rockwell installations in commercial or residential projects. The chrome finish on this Rockwell leg presents a clean, metallic appearance that suits exposed applications where the support is visible around counters and tables.
The 3 inch diameter x 34-1/2 inch high Rockwell leg uses a 4 9/16 inch (116mm) square mounting plate, which sets a defined footprint for fastening to the underside of a work surface or table top. This square mounting plate establishes clear edge distances, helping installers position the leg consistently along cabinet runs or at corners. The leg incorporates a 1 1/8 inch adjustable foot, which provides vertical adjustment range at the base so the installed height can be fine-tuned relative to floors. That adjustable foot helps take up floor irregularities, allowing the support to be leveled without cutting the leg. Because this part is categorized under work surface and tables, it fits naturally into layouts where the top structure is already framed and the leg provides supplemental support.
This Rockwell single table leg from Peter Meier, Inc. is placed in the work surface and tables category, so it is aimed at supporting tables, counters, and similar tops. The 3 inch diameter post gives each support a noticeably solid presence under a work surface, which is valuable where a top spans from cabinetry to the floor. With a 34-1/2 inch height, the leg suits layouts where the finished work surface or table height falls in a similar range, helping designers line up tops with adjacent casework. The 4 9/16 inch (116mm) square mounting plate defines how the leg connects to the underside of the surface, giving a predictable interface area that works with typical top thicknesses. The chrome finish aligns with applications where the leg is exposed, such as office tables, bar-style work surfaces, or modern residential islands.
The 1 1/8 inch adjustable foot built into this Rockwell leg lets installers shift the effective height within that adjustment range, which is helpful when aligning multiple legs on uneven floors. That foot adjustment capability lets a run of tables or counters be brought into plane without trimming the steel leg body. The defined 4 9/16 inch mounting plate size gives a repeatable screw pattern area, which supports consistent placement across multiple tops in a project. The single-leg configuration means each 976-8S-C1 leg can be added where extra support is needed under a span, which helps reduce deflection along long edges. The clear manufacturer part number also ties the specific chrome Rockwell leg to project documentation, supporting future replacements or expansions that match the original installation visually and dimensionally.
The 3 inch diameter x 34-1/2 inch high Rockwell leg establishes a support height in that range, so it suits work surfaces and tables designed around a similar finished height.
The 1 1/8 inch adjustable foot lets the installer fine-tune the leg height, which compensates for floor variations and brings multiple supports to the same level.
The 4 9/16 inch (116mm) square mounting plate provides a defined attachment area to the underside of the work surface, supporting consistent placement and load transfer.
The leg is listed under work surface and tables, so it serves as a support for tables, counters, and similar surfaces where the leg remains visible.
The 3 inch diameter describes the size of the round post, which spreads the support over a wider column and gives a substantial appearance under the work surface.
The manufacturer part number 976-8S-C1 identifies this specific chrome Rockwell leg, which simplifies specifying, ordering, and matching legs across a project.
The 3 inch diameter x 34-1/2 inch high Peter Meier Rockwell single table leg brings a defined height, a 4 9/16 inch square mounting plate, and a 1 1/8 inch adjustable foot to work surface projects. Those combined details give installers a known support size, a repeatable mounting footprint, and on-site height adjustment for leveling. For tables, counters, and other work surfaces where a chrome leg will remain visible and must align with standard heights, this 976-8S-C1 Rockwell leg offers a clearly specified solution ready to be built into new layouts or documented for repeat use.
Sold In: 1 Each
