Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 100 Logica hinge is a concealed angled hinge built for cabinet doors mounted on a 45-degree outward angle, with Silentia soft-close and toolless arm engagement, on both face-frame and frameless cabinets.
A standard concealed hinge is designed for a cabinet face that meets the door at 90 degrees. On a bay cabinet, a corner unit with an outward diagonal face, or any carcass where the mounting surface angles out at 45 degrees, that geometry no longer works. This hinge is built to that +45 degree cabinet angle so the arm travels correctly and the door operates without binding. The 35mm cup bores into the back of the door in the usual way, and the arm connects to a Salice base plate on the cabinet, ordered separately. The plate must be a Salice plate matched to your cabinet construction; plates are not interchangeable across brands.
The hinge is plated steel in a nickel finish. Silentia is Salice's integrated soft-close system: a damper built into the hinge slows the door through the last few degrees of travel so it does not impact the frame. On an angled cabinet, where a door that slams can rattle an entire diagonal face section, that cushioned close matters beyond just the sound. The 35mm cup seats at 13.5mm depth, and the 45mm boring pattern aligns with standard production boring.
Reach for this hinge when a project includes angled bay sections, diagonal corner fillers, or any cabinet carcass where the door-mounting surface runs at a 45-degree angle outward from the box. It suits cabinet shops designing and building custom angled units, as well as designers specifying concealed hardware for kitchens with bay windows or non-rectangular layouts. Because the hinge fits both face-frame and frameless construction, it covers the full range of cabinetry styles that include angled faces. Standard doors on 90-degree carcasses take a different hinge; this one is engineered for the specific angle where a standard arm geometry would put the door out of square.
No. The base plate is sold separately and must be a Salice plate matched to your cabinet construction. Plates from other brands will not connect to this hinge.
It refers to the angle of the cabinet's door-mounting surface relative to the box, not the opening angle of the door. This hinge is for cabinet faces that angle outward at 45 degrees, as found on bay cabinets and angled corner units. The door's opening angle is 105 degrees.
No. Silentia is Salice's soft-close system: a built-in damper slows the door over the last few degrees so it does not slam. Self-close uses a spring to pull the door shut but does not cushion the contact. This hinge has soft-close damping, not just a spring pull.
This hinge is designed for a +45 degree cabinet angle. For standard 90-degree cabinets, use a standard overlay concealed hinge instead.
When the cabinet design calls for a 45-degree outward face, this hinge gives you the correct arm geometry, a damped close, and a toolless install that keeps production moving.
Sold In: 1 Each