Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice 100 Series concealed hinge is built for cabinets set at a positive 45-degree angle, where a standard straight-mount hinge cannot reach the correct geometry. It brings Silentia soft-close and Rapido expanding-dowel mounting to angled face-frame and frameless casework.
Bay kitchens, angled corner treatments, and diagonal accent cabinets all share one challenge: a standard concealed hinge is machined for a 90-degree cabinet wall, so it cannot deliver the correct door geometry on an outward-facing angle. This hinge is built specifically for a positive 45-degree cabinet angle, meaning the hinge arm is offset to seat the door correctly against the angled panel or face frame. The 35mm cup bores into the back of the door at the standard depth, and the arm connects to a Salice base plate mounted to the cabinet, ordered separately. Plates are Salice-specific and are not interchangeable with other brands.
The hinge is plated steel in a nickel finish. On an angled cabinet, the door often swings across a wider visible path than on a standard box, making the close more noticeable. Silentia soft-close is integrated directly into the hinge body, so the door decelerates and seats quietly regardless of how hard it is pushed. The Rapido expanding-dowel system anchors the cup firmly in the door bore without relying on cup screws alone, which matters when repeated use puts lateral stress on a door mounted at an angle.
This is the hinge to specify when a kitchen or built-in design calls for a bay or diagonal cabinet face at a 45-degree outward angle on either a frameless or face-frame box. It suits designers detailing a specialty layout, cabinet shops building angled runs to a plan, and contractors sourcing a replacement for an existing angled cabinet install. The 105-degree opening is the correct working angle for this geometry. For a standard 90-degree cabinet, an overlay hinge from the same series is the appropriate choice. A Salice mounting plate matched to your cabinet construction is required and sold separately.
It means the cabinet wall or face frame faces outward at 45 degrees rather than straight forward, as on a bay cabinet or diagonal accent piece. The hinge arm is offset to match that geometry so the door hangs and closes correctly.
No. The hinge mounts to a Salice base plate that is sold separately. Choose a plate matched to your cabinet type, whether frameless or face-frame, and to the door position you need.
Rapido is Salice's expanding-dowel system, which locks the hinge cup into the bored door hole using an expanding dowel rather than cup screws alone. It gives a firm mechanical anchor in the door.
No. Salice plates are specific to Salice hinges. The arm engagement on this hinge will not connect to plates from Blum, Grass, Hettich, or other brands.
When the design calls for a bay or diagonal cabinet face, this hinge delivers the geometry, the damped close, and the firm mounting the application demands.
Sold In: 150 Each