Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 100 concealed hinge is built for cabinet openings set at a positive 45-degree angle, such as bay cabinets and angled corner units, with integrated Silentia soft-close and a screw-on mount for both face-frame and frameless construction.
Where a standard cabinet sits square and its door swings on a 90-degree axis, a 45-degree corner or bay cabinet presents its opening at an outward angle. A standard Euro hinge will not align the door correctly in that geometry. This hinge is engineered for exactly that situation: the arm is built to the positive 45-degree cabinet angle so the door sits and swings correctly relative to the angled opening. The 35mm cup bores into the back of the door in the usual way, and the hinge fastens to a separate base plate mounted to the cabinet. That plate is sold separately and must be a Salice-compatible plate matched to your cabinet construction.
The hinge body is steel in a Nickel finish. Silentia is Salice's soft-close system, integrated directly into the hinge rather than added on with a separate damper clip. The result is a controlled, cushioned close that works every time the door swings shut, without any extra parts to fit or replace. The 45mm boring pattern, 35mm cup, and 13.5mm cup depth are the standard Salice Series 100 dimensions for this segment.
Cabinet makers and installers reach for this hinge on kitchen layouts that include a bay window cabinet run, a diagonal corner unit, or any frameless or face-frame box whose front opening angles out at 45 degrees. Because the arm geometry is specific to the +45-degree cabinet angle, this hinge is not a substitute for a standard straight-cabinet hinge. If the cabinet sits square, a standard Series 100 hinge is the right pick. For the angled position, this is it. The screw-on mount suits both production shops drilling to spec and site installers working on a face-frame box where a tool-free clip plate is not the preferred connection.
Yes. The hinge clips to a base plate that mounts to the cabinet side or face frame, and that plate is sold separately. Use a Salice-compatible plate matched to your cabinet type. Plates are brand-specific and will not connect to hinges from other manufacturers.
It refers to the angle of the cabinet opening itself, not how far the door swings. A +45-degree cabinet has its front face set at a 45-degree outward angle relative to the cabinet run, common in bay cabinets and angled corner units. The hinge arm is built to match that angle so the door aligns and swings correctly.
For most angled corner installations, yes. The door's effective clearance in an angled run is a product of both the hinge's 105-degree swing and the cabinet's own angled position, which often means the door clears the adjacent cabinet front without needing a wider swing.
Yes. It is rated for both cabinet types. Use a face-frame plate when mounting to the stile and a frameless plate when mounting to the cabinet side panel.
Specify this hinge when the layout calls for a 45-degree corner or bay cabinet and the door needs to close quietly and sit true on every cycle.
Sold In: 150 Each