Salice 200 Series Soft-Close Hinge For Thick Doors
Salice 200 Series soft-close hinge gives you a 94 degree opening concealed cabinet hinge with the Silentia+ integrated soft-close system. The adjustable soft-close mechanism, operated by twin silicone-oil dampers, controls closing speed so doors settle smoothly against the cabinet. Silentia+ keeps the soft-close performance constant under different door weights or usage, which supports predictable results across a run of cabinets. This 1/2 inch overlay hinge is a concealed long arm style for professional cabinet work where hardware stays hidden. The hinge is suitable for doors up to 1-1/4 inch thick while maintaining minimal gaps between doors, which allows you to use thicker fronts without redesigning clearances. A large overlay capacity up to 24 mm lets you cover more frame while still using the same hinge family.
Key Silentia Hinge Details That Help On The Job
- The Silentia+ integrated soft-close mechanism uses twin silicone-oil dampers, which cushions the door movement so doors do not slam against the case and hardware during everyday use.
- The soft-close system is fully integrated and completely hidden within the hinge cup, which keeps the concealed hinge appearance clean while still providing the controlled closing motion.
- A 94 degree opening angle lets doors swing open to a practical working position while limiting projection, which helps in tight runs or near adjacent walls.
- The hinge works with doors up to 1-1/4 inch thick while maintaining minimal gaps, which supports thicker door designs without sacrificing consistent reveals between doors.
- Large overlays up to 24 mm are possible, which lets you design or retrofit cabinets with greater door coverage over the frame while using this same hinge model.
- The all steel hinge is nickel plated for corrosion resistance and is permanently self lubricating with environmentally safe lubricants, which supports long-term motion performance in typical cabinet environments.
Screw-On Salice Hinge Mounting And Adjustment
This Silentia 200 Series hinge uses a screw-on mounting style, which secures the hinge mechanically to the door and plate during installation. The hinge has a cup depth of 15.5 mm, providing a defined drilling depth for the cup hole in the door. A hinge cup edge drilling distance from 3 mm to 9 mm gives layout flexibility, so you can match standard boring patterns or adjust overlay within this range. Patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm is built into the hinge arm screw, letting you shift the door horizontally while keeping it parallel to the cabinet edge. This adjustment range helps fine-tune reveals and align multiple doors on a run without re-boring or moving the mounting plates.
Using The C2PBDE9 Hinge In Cabinet Projects
Where This Silentia Thick Door Hinge Works Best
The Salice 200 Series soft-close hinge is a concealed cabinet hinge for face-frame and frameless applications using thicker doors. Its suitability for doors up to 1-1/4 inch thick while maintaining minimal gaps between doors supports use on substantial solid wood or thick veneer fronts where edge buildup increases door thickness. The large overlay capability, up to 24 mm, allows coverage of more of the face-frame or cabinet side, which is useful in designs calling for generous overlays or in refacing situations that keep existing cases. The combination of face-frame and frameless thick door use lets shops standardize on one hinge family across different cabinet constructions. With a 94 degree opening, doors swing wide enough for access while staying controlled in tight installations next to walls or tall panels.
Why Silentia Soft-Close And Adjustment Improve Results
The Silentia+ integrated soft-close mechanism with twin silicone-oil dampers manages the closing energy of the door, so the hinge itself brings the door to a controlled stop at the cabinet front. Because the soft-close action is fully integrated and hidden inside the hinge cup, there are no external devices affecting the finished look. The permanently self lubricating all steel hinge, using environmentally safe lubricants, supports consistent motion cycle after cycle, which matters on frequently used kitchen and bath doors. Nickel plating adds corrosion resistance, helping the hinge maintain function and appearance in typical indoor moisture levels. Patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw provides a precise lateral tuning method, so installers can correct small case or door variations while keeping doors parallel to each other. The cup depth of 15.5 mm and drilling distance range of 3 mm to 9 mm create a defined boring standard that can be repeated in production or shop settings.
Common Questions About The Salice Silentia C2PBDE9
What type of cabinet hinge is the C2PBDE9?
The C2PBDE9 is a Salice Series 200 concealed cabinet hinge with a 94 degree opening angle, which keeps the hardware hidden while still letting the door open to a practical working position.
How does the Silentia+ soft-close mechanism work in use?
The Silentia+ mechanism uses twin silicone-oil dampers integrated in the hinge cup, which slows the door during closing so it reaches the cabinet quietly and in a controlled way.
What door thickness can this Salice 200 Series hinge handle?
The hinge is suitable for doors up to 1-1/4 inch thick while maintaining minimal gaps between doors, which supports thicker door constructions without widening reveals.
How much overlay can this Silentia thick door hinge provide?
This hinge allows large overlays up to 24 mm, which lets a door cover more of the cabinet face-frame or side for specific design or refacing layouts.
What side-to-side adjustment range does the hinge offer?
The hinge has patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw, which helps align doors horizontally along a run.
What mounting plates work with the C2PBDE9 hinge?
The C2PBDE9 is part of the Series 200 hinges designed to work with Salice mounting plates, which lets you pair it with the appropriate Salice plate system.
Selecting This Salice Hinge For Your Next Job
The Salice 200 Series soft-close hinge with Silentia+ provides a 94 degree concealed solution for 1/2 inch overlay face-frame or frameless thick door applications. Its ability to handle doors up to 1-1/4 inch thick with minimal gaps, overlays up to 24 mm, and parallel side-to-side adjustment supports precise reveals on demanding cabinet runs. The integrated, hidden soft-close mechanism with twin silicone-oil dampers and the nickel plated, self lubricating steel construction give you controlled motion in a concealed format. Use these verified details to match this hinge to cabinet projects requiring thick doors, generous overlays, and consistent soft-close performance.
