DH Caster 10" Plate Mount Swivel Caster, Polyurethane/Cast Iron, No Brake, 3,000 lb, C-SHD1030PUS

DH Casters Swivel Caster For Heavy Loads

DH Casters swivel caster with 10 inch polyurethane / cast iron wheel is a plate mount, heavy duty caster rated for 3000 lb capacity, so it supports cargo containers, factory assembly tables, and heavy machinery in demanding shop or plant environments. The drop forged heavy duty caster uses AISI 1045 hot forged steel, which delivers high impact resistance, so the rig holds up when equipment is moved over rough surfaces or under shock loading. A full double ball bearing raceway in the swivel section lets the caster rotate smoothly under load, which helps equipment track predictably when you push or pull from different angles. The zinc plated finish on the rig provides a protective surface, which helps the caster maintain performance in typical industrial and woodworking environments. A non-marking wheel design keeps floors cleaner, which matters on finished concrete or coated shop floors.

Heavy Duty Caster Details That Support Daily Use

• The drop forged heavy duty rig built from AISI 1045 hot forged steel adds impact resistance, so the caster structure tolerates bumps, floor transitions, and operational shocks common around cargo containers and heavy machinery.
• The full double ball bearing raceway in the swivel section keeps rotation smooth under the 3000 lb design load, which helps equipment change direction without binding when workers reposition factory assembly tables.
• The zinc plated finish on the caster rig provides a protective surface layer, so the caster resists typical shop wear while maintaining appearance and function in woodworking or industrial areas.
• The non-marking polyurethane / cast iron wheel construction protects floors from marking, so finished concrete around machinery or high-traffic assembly areas stays visually cleaner over long-term use.
• The 10 inch wheel diameter with 3 inch tread width spreads the 3000 lb capacity over more surface area, which helps the caster roll more easily under heavy loads in factory or warehouse applications.
• The plate mount design with 3/8 inch thick top plate offers a solid mounting interface, so the caster ties firmly into equipment frames for cargo containers and heavy machinery moves.

Plate Mount Caster Setup And Fit Details

This plate mounted caster uses a 5-1/4 inch by 7-1/4 inch top plate, so installers can match the plate footprint to existing mounts on cargo containers, factory assembly tables, or heavy machinery frames. The 3/8 inch thick top plate provides a substantial mounting surface, so the interface between the caster and the equipment structure stays rigid when the caster is loaded toward its 3000 lb rating. Welded 5/16 inch legs connect the rig to the axle area, which forms a solid path from load to wheel for stable handling. A nut and bolt kingpin secures the swivel section, so the rotation joint remains serviceable in typical use. The 3/4 inch axle through the 10 inch polyurethane / cast iron wheel supports the 3 inch tread width, which keeps rolling behavior consistent once the caster is mounted on heavy equipment.

Using This Drop Forged Caster In Real Work

Where This 10 Inch Caster Performs Best

This drop forged heavy duty caster is specified for applications such as cargo containers, factory assembly tables, and heavy machinery, so it fits directly into environments where concentrated loads must be moved on a regular basis. The 3000 lb load capacity allows a single caster to carry substantial weight, which supports layouts using multiple casters under large frames or equipment bases. Its 10 inch polyurethane / cast iron wheel with a 3 inch tread width operates as a robust rolling interface, so it navigates typical factory floors and shop environments while still rolling smoothly. The non-marking wheel design matters when cargo containers or machinery operate on finished concrete or coated surfaces, because it helps prevent dark trails in high-traffic lanes. Plate mount construction aligns with equipment that uses flat plates for load transfer, which is common on heavy fabrication and assembly fixtures.

Why The Swivel And Forged Rig Matter In Use

The caster uses a swivel type design, so the wheel assembly rotates around a vertical axis to change direction without lifting the load, which is important when workers steer factory assembly tables or heavy machinery through tight spaces. A full double ball bearing raceway in the swivel top provides the rolling elements for that rotation, which keeps steering effort more consistent as weight on the caster approaches the 3000 lb rating. The rig is described as drop forged heavy duty and built from AISI 1045 hot forged steel, so the yoke and top plate structure handle impact loads such as floor joints or debris under the wheel without deforming as readily as lighter constructions. The zinc plated finish adds a protective surface that supports longevity in typical indoor industrial conditions. The nut and bolt kingpin joins the swivel components, forming a serviceable center pivot that maintains alignment between the top plate and wheel. A 3/4 inch axle passes through the wheel hub to carry the 10 inch diameter and 3 inch tread width, which provides a stable base for heavy loads when the caster is in continuous service under machinery or cargo frames.

Common Questions About This DH Casters Model

Choose This Caster For Heavy Duty Mobility

The C-SHD1030PUS DH Casters swivel caster pairs a 3000 lb load capacity with a drop forged AISI 1045 hot forged steel rig, so it addresses demanding movement tasks for cargo containers, factory assembly tables, and heavy machinery. Its 10 inch polyurethane / cast iron non-marking wheel and 3 inch tread width provide a stable rolling surface that protects finished floors while carrying substantial weight. The plate mount design with a 5-1/4 inch by 7-1/4 inch, 3/8 inch thick top plate ties securely into equipment frames, supporting consistent performance in daily industrial workflows.