DH Casters Swivel Caster With 6" Steel Wheel No Brake, Plate Mount 2000lb Capacity - C-SHD630SSS

DH Casters Swivel Caster For Heavy Loads

DH Casters swivel caster 6 inch steel wheel puts a 6 inch diameter, 3 inch tread width steel wheel under heavy loads, so cargo containers, factory assembly tables, and heavy machinery roll on a compact footprint. The drop forged heavy duty caster design uses AISI 1045 hot forged steel, which provides more impact resistance, so the rig handles shock from rough floors and frequent repositioning. A 2000 lb load capacity rating supports substantial equipment weight on a single caster, allowing high-capacity carts or fixtures to track on fewer wheels. The plate mount layout ties the caster to a 5-1/4 inch by 7-1/4 inch top plate, spreading load into the frame for stable mounting. A swivel type rig rotates under load, so operators turn equipment without dragging. The steel wheel construction works where a non-marking wheel is required for the application.

Key Caster Details That Support Daily Use

• The AISI 1045 hot forged steel rig adds impact resistance, helping the caster absorb floor joints and hard hits in cargo container and machinery environments without deforming under typical rated loads.
• The full double ball bearing raceway allows the swivel section to rotate more smoothly under weight, which reduces effort when positioning factory assembly tables or turning heavy machinery into tight spots.
• The 3/8 inch thick top plate spreads force into the mounting surface, supporting the 2000 lb capacity and helping frames stay flatter when equipment is parked or moved on uneven floors.
• The 5/16 inch welded legs tie the wheel to the rig with solid steel sections, which keeps the steel wheel aligned inside the yoke while the caster tracks under repeated directional changes.
• The nut and bolt kingpin creates a serviceable pivot point for the swivel action, maintaining alignment between the upper rig and lower fork assembly so the caster tracks predictably under heavy loads.
• The 3/4 inch axle supports the 6 inch steel wheel across its 3 inch tread width, helping the wheel stay stable as it carries the rated 2000 lb load in high-duty shop and industrial applications.

Plate Mount Swivel Layout For Fixed Mounting

The plate mounted casters DH Casters design uses a plate mount layout with a 5-1/4 inch by 7-1/4 inch plate, so installers fasten the caster to a flat steel, wood, or fabricated frame surface to create a stable attachment point. The swivel type rig lets the caster rotate beneath the plate, so equipment turns around the vertical pivot while the mounting plate stays fixed to the cart or table frame. The 3/8 inch plate thickness keeps the mount surface rigid at the connection, which supports consistent swivel performance at the 2000 lb capacity rating. Welded 5/16 inch legs tie directly down from the plate to the wheel, transferring load efficiently from the mounting structure into the 3/4 inch axle and 6 inch steel wheel.

Using This Drop Forged Heavy Duty Swivel Caster

Where The C-SHD630SSS Swivel Caster Fits

The C-SHD630SSS swivel caster fits cargo containers, factory assembly tables, and heavy machinery applications defined in its description, so it suits projects where concentrated loads need to roll on a steel wheel. The 6 inch wheel diameter raises equipment high enough for floor clearance around joints and debris while still keeping lift height moderate for stability. A 3 inch tread width spreads 2000 lb rated load over more floor contact, which benefits heavy equipment carts by reducing point loading on concrete. The plate mount style uses the 5-1/4 inch by 7-1/4 inch plate to integrate into structural frames, making the caster part of welded or bolted bases. The swivel configuration under the plate lets installers configure carts with a mix of swivel and fixed casters where required by the workflow.

Why This Drop Forged Caster Supports Repeatable Moves

The drop forged heavy duty caster rig built from AISI 1045 hot forged steel provides impact resistance, so repeated rolling over expansion joints or rough shop conditions keeps the swivel section and legs in working alignment. A full double ball bearing raceway carries the swivel movement, so even at higher loads the caster pivots with less binding, supporting repeatable positioning around work cells. The nut and bolt kingpin secures the swivel interface, maintaining the relationship between top plate and fork under the 2000 lb load capacity. Welded 5/16 inch legs transfer load into the 3/4 inch axle, helping the 6 inch steel wheel stay square to the frame during directional changes. The steel wheel construction and non-marking wheel description support use where heavy loads, smooth rolling, and floor appearance must balance in cargo container or machinery areas.

Common Questions About This Heavy Duty Caster

Choose This Caster For Heavy Rolling Loads

The drop forged heavy duty caster design, 2000 lb capacity, and 6 inch steel wheel give builders a compact rig for cargo containers, factory assembly tables, and heavy machinery moves. The 5-1/4 inch by 7-1/4 inch plate mount and double ball bearing raceway support stable, predictable swivel action. The AISI 1045 hot forged steel rig and welded 5/16 inch legs tie directly into the 3/4 inch axle, keeping the 3 inch tread width wheel aligned under demanding loads. For projects calling for a non-marking steel wheel caster with this capacity and plate layout, this DH Casters swivel caster aligns well with heavy-duty rolling requirements.