DH Caster 6" Plate Mount Rigid Caster, Polyurethane/Cast Iron, No Brake, 2,000 lb, C-SHD630PUR

Rigid Caster 6 Inch Polyurethane Cast Iron Wheel

Rigid caster 6 inch polyurethane cast iron is the core of this DH Casters C-SHD630PUR unit, giving you a wheel that combines a 6 inch diameter and 3 inch tread width for steady support under load. The drop forged heavy duty caster body uses AISI 1045 hot forged steel, so the yoke handles impact in demanding shops or industrial spaces. A full double ball bearing raceway keeps the swivel section rolling smoothly, which helps when positioning heavy assemblies. The caster wheel uses a poly and cast iron construction described as a non-marking wheel, which supports floor appearance while handling weight. Zinc plated finish on the metal components adds surface protection in typical indoor environments. A 3/4 inch axle ties directly into the heavy wheel design, so the rolling section matches the overall 2000 lb capacity rating.

Heavy Duty Caster Details That Matter On The Job

• The 2000 lb load capacity rating means a single caster supports substantial weight, which matters when setting up cargo containers, factory assembly tables, or heavy machinery so each point load stays within limits.
• The plate mount design with a 3/8 inch thick top plate and plate size of 5-1/4 inch by 7-1/4 inch spreads load into the structure, which helps when fastening to steel frames or heavy bases where footprint and stiffness are critical.
• 5/16 inch welded legs tie the yoke to the top plate, which provides a rigid connection that resists bending in heavy duty moves and keeps the wheel tracking straight on rigid configurations.
• The rigid type configuration holds the wheel in a fixed direction, which is useful when you want straight-line tracking under machinery or carts rather than steering around tight corners.
• The nut and bolt kingpin construction secures the wheel assembly, which supports serviceability and helps maintain alignment under repeated loading cycles in production settings.

Plate Mount Caster Setup For Stable Rolling Support

This plate mount rigid caster uses a 5-1/4 inch by 7-1/4 inch top plate, giving a broad mounting surface when laying out bolt patterns on equipment frames or table bases. The 3/8 inch thick top plate adds stiffness to the interface, which supports stability under the 2000 lb capacity rating. 5/16 inch welded legs connect the plate to the wheel section, tying vertical load into the AISI 1045 hot forged steel structure for consistent height under weight. The 6 inch diameter and 3 inch tread width poly and cast iron wheel support smooth rolling on typical plant floors. A 3/4 inch axle passes through the wheel, linking the non-marking wheel design to the overall heavy duty assembly.

Using This DH Casters Rigid Unit In Real Work

Where This Rigid Plate Caster Fits Best

The DH Casters rigid caster with 6 inch poly and cast iron wheel is described for applications such as cargo containers, factory assembly tables, and heavy machinery, which all benefit from straight-line movement under heavy loads. The 2000 lb load capacity allows each caster position on a frame or table to handle substantial weight, so multi-caster layouts on large machinery bases can share total loads effectively. The plate mount design with a 5-1/4 inch by 7-1/4 inch footprint supports mounting on structural members, where the 3/8 inch thick top plate helps distribute force into channels or plates. AISI 1045 hot forged steel construction provides impact resistance in material handling aisles or production cells, so the caster structure responds predictably when rolling over joints or minor floor irregularities.

Details That Support Repeatable Heavy Duty Movement

The full double ball bearing raceway in this drop forged heavy duty caster keeps rotation smooth under load, which helps operators move assemblies without sudden binding. The poly and cast iron non-marking wheel combines a 6 inch diameter and 3 inch tread width, supporting both carrying capacity and reduced marking on typical hard floors during repeated passes. 5/16 inch welded legs connect the wheel section to the 3/8 inch thick top plate, creating a fixed geometry that helps maintain consistent mounting height across multiple casters on the same piece of equipment. The nut and bolt kingpin and 3/4 inch axle tie the wheel to the AISI 1045 hot forged steel yoke, providing a continuous load path from tread to mounting plate. Zinc plated finish on the metal components gives a clean surface that resists basic shop wear, helping the caster maintain appearance and function over time.

Common Questions About This Heavy Duty Caster

Choose This Caster For Heavy Plate Mounted Loads

The DH Casters rigid caster C-SHD630PUR pairs a 2000 lb capacity with a 6 inch poly and cast iron non-marking wheel, which suits cargo containers, factory assembly tables, and heavy machinery described in its applications. The plate mount design, with 5-1/4 inch by 7-1/4 inch dimensions and a 3/8 inch thick top plate, provides a solid interface for structural mounting. AISI 1045 hot forged steel and 5/16 inch welded legs deliver a heavy duty structure. Select this caster when a rigid, straight-tracking plate mounted solution matches your heavy load handling layout.