DH Casters Swivel Caster With 6" Polyurethane / Cast Iron Wheel No Brake, Plate Mount 2000lb Capacity - C-SHD630PUS

DH Casters Swivel Caster For Heavy Loads

DH Casters swivel caster with 6 inch polyurethane cast iron wheel is a drop forged heavy duty caster that carries up to 2000 lb, so it handles cargo containers, factory assembly tables, and heavy machinery in demanding shop environments. The AISI 1045 hot forged steel construction gives the rig more impact resistance, so it copes with knocks and side loads common around material handling and industrial equipment. A full double ball bearing raceway in the swivel head lets the caster rotate smoothly under heavy weight, which helps when positioning loaded tables or machinery precisely. The swivel type design lets the wheel pivot as direction changes, which supports tight turns in crowded work areas. The non-marking wheel tread protects floors while equipment moves, which is useful around finished concrete or coated shop surfaces where marking would cause appearance or cleanup issues.

Key Details That Support Demanding Caster Use

• The 6 inch wheel diameter helps the caster roll over small floor joints and debris, which supports smoother movement of heavy machinery and assembly tables across typical shop floors.
• The 3 inch tread width spreads the 2000 lb load across more surface area, which helps stabilize tall or heavy equipment and reduces point loading on the floor.
• The poly and cast iron wheel construction combines a hard core with a protective tread, which helps support heavy loads while still delivering a non-marking rolling surface.
• The plate mount design ties loads into a 5-1/4 inch by 7-1/4 inch top plate, which creates a broad mounting footprint for carts, tables, and machinery frames.
• The zinc plated finish on the drop forged rig resists surface corrosion, which helps the caster maintain appearance and function in typical indoor industrial environments.
• The nut and bolt kingpin with 3/4 inch axle and 5/16 inch welded legs creates a rigid swivel assembly, which supports consistent tracking and turning under heavy loading.

Plate Mount Caster Setup And Fit Details

This drop forged heavy duty caster uses a plate mount with a 5-1/4 inch by 7-1/4 inch top plate, so it fastens to flat steel frames or wood blocking sized for that footprint on cargo containers, factory assembly tables, and heavy machinery. The 3/8 inch thick top plate provides a solid base for the 2000 lb load rating, which helps transfer forces from the wheel into the equipment frame. The 5/16 inch welded legs tie the plate down to the wheel fork, so impact loads at the wheel translate through a welded structure rather than relying on formed sheet alone. The swivel type rig allows the caster to rotate under the mounting plate, which helps equipment follow steering inputs smoothly when casters are arranged properly on the chassis.

Using This Drop Forged Heavy Duty Caster

Where This 2000 Lb Plate Caster Works Best

This drop forged heavy duty caster with 6 inch poly and cast iron wheel is specified for cargo containers, factory assembly tables, and heavy machinery, so it suits applications where concentrated loads and frequent repositioning are expected. The 2000 lb load capacity per caster supports substantial equipment weight, which is valuable when designing rolling bases for industrial machines or heavy workstations. The non-marking wheel characteristic matters in production areas with finished floors, because it allows movement of heavy items without leaving marks that affect housekeeping or surface appearance. The plate mounted casters category placement highlights its role on flat mounting surfaces, so it integrates well with welded steel frames, structural tube bases, or heavy wood platforms sized for the 5-1/4 inch by 7-1/4 inch plate.

Details That Support Smooth, Repeatable Positioning

The full double ball bearing raceway in the swivel section allows the caster to rotate under heavy weight with less effort, which helps operators pivot loaded machinery or assembly tables precisely into position. A nut and bolt kingpin secures the swivel assembly, which provides a serviceable joint that holds the ball races together under the rig loads described in the 2000 lb capacity. The 3/4 inch axle carries the 6 inch diameter, 3 inch wide wheel, so the rolling interface is supported by a substantial shaft relative to the wheel size and duty. The AISI 1045 hot forged steel rig with 5/16 inch welded legs and 3/8 inch thick top plate distributes shock loads, which helps the caster maintain alignment when crossing typical shop floor transitions. The zinc plated finish on the rig protects the steel surfaces from corrosion, which helps the swivel and wheel components continue to operate smoothly in normal indoor industrial conditions.

Common Questions About This DH Casters Swivel Caster

Select This Caster For Heavy Duty Plate Mount Use

The DH Casters swivel caster with 6 inch poly and cast iron wheel, 2000 lb capacity, and 5-1/4 inch by 7-1/4 inch plate mount offers a defined solution for cargo containers, factory assembly tables, and heavy machinery. The drop forged AISI 1045 hot forged steel rig, 3/8 inch thick top plate, 5/16 inch welded legs, and full double ball bearing raceway combine into a caster built for heavy duty plate mounted casters applications. For projects matching these dimensions, load, and application details, this C-SHD630PUS caster gives a clearly specified option to integrate into new builds or upgrades.