DH Casters Swivel Caster 8 Inch For Heavy Loads
DH Casters swivel caster 8 inch is a drop forged heavy duty caster built for demanding material handling. The caster uses AISI 1045 hot forged steel, which delivers higher impact resistance under load so carts and fixtures stay stable when moved across rougher floor transitions. Its design features a full double ball bearing raceway that supports smooth swivel action, helping heavy cargo containers and machinery change direction without binding. The zinc plated finish protects the forged steel against normal shop and plant conditions, which maintains performance during long-term use. A 3/8 inch thick top plate spreads the 2500 lb load capacity across the mounting surface, supporting stable attachment to steel frames or heavy wooden bases. Its plate mount configuration suits welded or bolted installations where a rigid mounting interface is needed for repeated moves.
Heavy Duty Caster Details That Support Daily Use
- The drop forged heavy duty construction in AISI 1045 hot forged steel handles impact from loaded carts, which supports repeated movement of heavy machinery and factory assembly tables without deforming the yoke.
- The full double ball bearing raceway provides smooth swivel rotation under load, which helps operators reposition cargo containers and fixtures accurately in tight floor layouts.
- The zinc plated finish protects the steel components from typical shop environments, which helps the caster maintain consistent rolling performance over many duty cycles.
- The 3/8 inch thick top plate distributes force into the mounting surface, which supports secure attachment when the 2500 lb load rating is used in demanding industrial applications.
- The non-marking phenolic wheel limits floor streaking, which matters on production or warehouse floors where clean traffic lanes and minimal cleanup are needed after moving equipment.
Plate Mount Caster Setup For Stable Swiveling
This plate mount swivel caster uses a 5-1/4 inch by 7-1/4 inch top plate, which gives a broad footprint to anchor the 2500 lb capacity into carts or machinery bases. The nut and bolt kingpin locks the swivel assembly through the forged yoke, which keeps the raceway properly clamped for consistent turning under heavy loads. Its 5/16 inch welded legs tie the yoke to the axle section, helping the caster resist twisting forces when a loaded unit pivots. The 3/4 inch axle supports the 8 inch diameter wheel and 3 inch tread width, providing a wide bearing surface that shares the weight for steady rolling. This combination of plate size, kingpin design, and axle diameter supports controlled swiveling when aligning cargo containers or assembly tables into position.
Using This Caster On Machinery, Tables, And Containers
Where This Drop Forged Heavy Duty Caster Fits Best
This drop forged heavy duty caster is specified for applications such as cargo containers, factory assembly tables, and heavy machinery, which suits plants and shops that routinely position dense equipment. The 8 inch wheel diameter paired with a 3 inch tread width supports rolling heavy loads across typical industrial floors while maintaining a stable contact patch. Its phenolic wheel construction delivers a non-marking surface, which is useful around assembly areas and traffic aisles where tracking from casters would interfere with cleanliness or workflow. The plate mount layout with a 5-1/4 inch by 7-1/4 inch plate ties directly into structural frames, suiting welded carts, steel skids, or reinforced bases that need repeatable positioning.
Why This 2500 Lb Swivel Caster Supports Repeatable Moves
The 2500 lb load capacity allows this caster to carry heavy machinery, cargo containers, or loaded factory assembly tables without over-stressing the wheel and yoke, which supports repeatable moves during shift changes or layout adjustments. Its full double ball bearing raceway reduces turning resistance while under load, which helps operators pivot equipment accurately without excessive effort. The nut and bolt kingpin holds the forged yoke together under these side loads, which maintains swivel alignment for consistent tracking. A 3/8 inch thick top plate and 5/16 inch welded legs work together to resist bending, so the wheel remains square to the mounting plate while rolling. The 3/4 inch axle supports the 8 inch phenolic wheel, which helps maintain concentric rolling and steady handling as heavy fixtures are pushed or pulled in production spaces.
Common Questions About This DH Casters Swivel Caster
What load can this DH Casters swivel caster handle?
This DH Casters swivel caster has a load capacity of 2500 lb, which supports moving heavy machinery, cargo containers, or assembly tables on a single caster position.
What are the wheel size and tread width on this caster?
This caster uses an 8 inch diameter wheel with a 3 inch tread width, which provides a wider contact area for supporting heavy loads during movement.
How is this heavy duty caster mounted to equipment?
This heavy duty caster is a plate mount design with a 5-1/4 inch by 7-1/4 inch plate, which fastens to carts or machinery bases as part of the structure.
What material is used in the caster wheel?
The wheel is phenolic and non-marking, which lets heavy carts roll on suitable floors while reducing visible marks in work areas.
What steel and construction are used in the caster body?
The caster body uses AISI 1045 hot forged steel with a zinc plated finish, which provides impact resistance and surface protection during industrial use.
What swivel design does this caster use?
The caster uses a full double ball bearing raceway with a nut and bolt kingpin, which supports smooth swiveling and maintains alignment under heavy side loads.
Select This Caster For Heavy Industrial Mobility
The DH Casters swivel caster with 8 inch phenolic wheel, 3 inch tread width, and 2500 lb load capacity provides a drop forged heavy duty option for cargo containers, factory assembly tables, and heavy machinery. Its AISI 1045 hot forged steel construction, full double ball bearing raceway, nut and bolt kingpin, and 5-1/4 inch by 7-1/4 inch plate mount work together to support controlled, repeatable movement in industrial settings. For projects needing non-marking wheels and a robust plate mount caster, this model aligns with demanding handling requirements.
