DH Caster 8" Plate Mount Swivel Caster, Polyurethane/Cast Iron, With Brake, 2,500 lb, C-SHD830PUSB

DH Casters Swivel Caster 2500 Lb For Heavy Loads

DH Casters swivel caster 2500 lb is a drop forged heavy duty caster built from AISI 1045 hot forged steel, which handles impact in demanding environments while still allowing the wheel to roll smoothly under rated load. The caster uses a full double ball bearing raceway, so swivel movement stays consistent under weight and during frequent direction changes in material-handling layouts. A zinc plated finish on the rig provides a protective surface that helps the caster tolerate typical shop and warehouse conditions. The 8 inch poly / cast iron wheel combines a durable core with a polyurethane running surface, which supports heavy machinery while maintaining a non-marking wheel for finished concrete floors. A wheel diameter of 8 inches with a 3 inch tread width helps the caster roll over joints and debris more steadily, supporting cargo containers and factory assembly tables.

Heavy Duty Caster Details That Support Workflow

• The AISI 1045 hot forged steel rig construction delivers impact resistance, so the caster stays serviceable under heavy machinery loads and frequent movement in industrial areas.
• The full double ball bearing raceway allows smoother swivel action under load, which helps operators reposition cargo containers or assembly tables with less binding during tight maneuvers.
• The zinc plated finish on the caster rig provides a protective surface, helping the assembly tolerate normal shop humidity and spills that occur around heavy equipment.
• The 8 inch poly / cast iron wheel with 3 inch tread width carries substantial weight while maintaining floor-friendly, non-marking travel for finished plant and warehouse floors.
• The 2500 lb load capacity allows this caster to support cargo containers, factory assembly tables, and heavy machinery, so fewer casters are needed to handle substantial equipment weight.
• The nut and bolt kingpin with 3/4 inch axle creates a solid load path through the caster, supporting repeated rolling and swiveling cycles in busy work areas.

Plate Mount Swivel Caster Installation Characteristics

This plate mount swivel caster with brake uses a 3/8 inch thick top plate, giving the mounting interface rigidity when fastening to equipment bases or frames. The plate size of 5-1/4 inch by 7-1/4 inch spreads the 2500 lb capacity over a broad footprint, which helps distribute stress into the mounting surface. The 5/16 inch welded legs link the rig to the wheel, so load passes from the plate down into the wheel through welded structural members. A nut and bolt kingpin connects the yoke to the top plate, allowing the caster to swivel while carrying heavy loads in cargo container or machinery applications. The 3/4 inch axle supports the 8 inch wheel and 3 inch tread width, keeping the wheel aligned as it rolls under heavy factory assembly tables.

Using This Heavy Duty Drop Forged Caster On The Job

Where This Poly Cast Iron Caster Performs Best

This heavy duty drop forged caster is designed for applications such as cargo containers, factory assembly tables, and heavy machinery, so it fits into material handling setups that move significant weight. The AISI 1045 hot forged steel rig suits areas where impact from rolling loads or occasional floor irregularities is common, keeping the caster structure ready for repeated use. With a wheel diameter of 8 inches and 3 inch tread width, the caster tracks steadily under bulky equipment, which supports long straight runs and slow turns inside production facilities. The poly / cast iron wheel type gives a strong wheel core combined with a polyurethane running surface, letting the non-marking wheel carry heavy items while respecting floors around woodworking or manufacturing equipment. A swivel type configuration allows the caster to rotate as loads are steered, helping operators move cargo containers or tables through aisles and around corners in factories.

Why These Caster Details Support Repeatable Results

The 2500 lb load capacity is central to planning layouts, because it lets each caster reliably support a significant portion of heavy machinery or container weight without overloading the rig. The full double ball bearing raceway in the swivel section supports consistent turning effort, so directional changes remain manageable even when equipment stays fully loaded. A zinc plated finish on the caster rig provides a practical surface treatment that tolerates spills and normal indoor exposure, helping the caster stay presentable in visible plant areas. The 3/8 inch thick top plate and 5-1/4 inch by 7-1/4 inch dimensions create a stable mounting base, which reduces flex at the attachment point when loads roll or pivot. Welded 5/16 inch legs connect the plate to the wheel fork, forming a rigid path from mounting surface down to the 3/4 inch axle. The non-marking wheel behavior supports use around finished floors in assembly spaces, where clean appearance and reduced floor staining matter.

Common Questions About The C-SHD830PUSB Caster

Select This Swivel Caster For Heavy Equipment Moves

The DH Casters swivel caster 2500 lb with 8 inch poly / cast iron wheel and brake offers a drop forged AISI 1045 rig, full double ball bearing raceway, and 3/8 inch thick top plate, aligning with cargo container, factory assembly table, and heavy machinery applications. When a plate mount caster with 5-1/4 inch by 7-1/4 inch footprint and non-marking wheel is needed for demanding shop or plant layouts, this C-SHD830PUSB model provides the specified load capacity and swivel design to support those projects.