DH Casters Swivel Caster With 8" Polyurethane / Cast Iron Wheel No Brake, Plate Mount 2500lb Capacity - C-SHD830PUS

DH Casters Swivel Caster For Heavy Loads

DH Casters swivel caster with 8 inch polyurethane / cast iron wheel is a plate-mounted swivel caster designed to move heavy loads while protecting floor surfaces, so cargo containers, factory assembly tables, and heavy machinery can roll smoothly under load. This drop forged heavy duty caster uses AISI 1045 hot forged steel, which gives added impact resistance during demanding industrial use where shocks and side loads are common. The caster has a 2500 lb load capacity, allowing a single unit to carry substantial weight on equipment or platforms. A non-marking wheel construction helps limit visible floor marks, which matters in finished work areas and production floors. The wheel diameter is 8 inches with a 3 inch tread width, so each rotation covers ground efficiently while spreading weight across a wider contact area. The caster is a swivel type, allowing direction changes without repositioning the equipment frame.

Heavy Duty Caster Details That Support Work

• Drop forged heavy duty construction using AISI 1045 hot forged steel provides more impact resistance, which supports frequent movement of loaded cargo containers and equipment in demanding areas.
• Full double ball bearing raceway is built into the swivel section, which helps the caster rotate more freely under load for smoother direction changes at working weights.
• Zinc plated finish is applied over the steel body, which helps the caster resist surface corrosion in typical factory or shop environments where moisture or spills may be present.
• 5/16 inch welded legs tie the fork structure together, which supports the wheel against side forces when machinery or assembly tables are pushed or pulled from different angles.
• 3/8 inch thick top plate forms the mounting interface, which helps keep the caster stable on the plate mount and supports the rated 2500 lb load capacity.
• Nut and bolt kingpin combined with a 3/4 inch axle secures the swivel and wheel, which aids long-term tracking and rotation on heavy machinery and industrial carts.

Plate Mount Swivel Caster Fit And Setup

This plate mount 2500 lb caster uses a 3/8 inch thick top plate sized at 5-1/4 inch by 7-1/4 inch, giving a broad mounting surface for welding or bolting to frames that match these dimensions. The plate mount design keeps installation focused on one flat interface, which helps align multiple casters on cargo containers or factory assembly tables. The swivel caster type allows equipment to pivot around the kingpin, which is supported by a full double ball bearing raceway for smoother turning when changing direction. The 3/4 inch axle carries the 8 inch diameter, 3 inch tread width wheel, which supports a wide track and steady motion. Welded 5/16 inch legs connect the fork to the plate, tying the wheel position to the mounting plate for consistent caster geometry.

Using This Drop Forged Heavy Duty Caster

Where This Plate Mounted Caster Performs Best

This drop forged heavy duty caster is described for applications on cargo containers, factory assembly tables, and heavy machinery, so it is suited to situations where loads approach the 2500 lb range per caster. The AISI 1045 hot forged steel construction gives more impact resistance, which helps when loaded containers meet floor imperfections or when equipment is pushed across thresholds. The 8 inch wheel diameter helps the caster roll over minor floor irregularities, while the 3 inch tread width spreads weight, which matters when supporting concentrated loads on machinery feet. The non-marking wheel design is useful on production floors and assembly areas where floor appearance and cleanup time matter. As a poly / cast iron wheel, the tread and core combination supports smooth rolling while maintaining strength for heavy duty use on industrial carts and tables.

How Design Details Support Repeatable Movement

The full double ball bearing raceway in the swivel section supports repeatable rotation under load, which helps operators turn heavy assembly tables or machinery without binding at varying approach angles. The nut and bolt kingpin ties the swivel components together, combining with welded 5/16 inch legs to keep the fork alignment consistent over time. The 3/8 inch thick top plate sized at 5-1/4 inch by 7-1/4 inch provides a rigid mounting surface, which helps distribute the 2500 lb load capacity into the frame with less plate deflection. The 3/4 inch axle supports the 8 inch poly / cast iron wheel, helping maintain true tracking as the caster rolls in straight lines or pivots. Zinc plated finish on the forged steel structure supports ongoing movement in shop or factory environments by resisting surface rust that can otherwise affect rotation and mounting points.

Common Questions About This Swivel Caster

Select This Caster For Heavy Moving Tasks

The DH Casters swivel caster with 8 inch poly / cast iron wheel pairs a 2500 lb load capacity with drop forged AISI 1045 steel, so it is suited to moving heavy machinery, cargo containers, and assembly tables on non-marking wheels. The plate mount size of 5-1/4 inch by 7-1/4 inch with 3/8 inch thickness, combined with welded 5/16 inch legs and a 3/4 inch axle, supports stable installation on frames designed around this footprint. For projects needing full double ball bearing swivel action and zinc plated finish in a plate mounted heavy duty caster, this C-SHD830PUS unit provides the core details required for demanding shop and factory movement tasks.