DH Caster 6" Plate Mount Rigid Caster, Steel, No Brake, 2,000 lb, C-SHD630SSR

DH Casters Rigid Caster For Heavy Loads

DH Casters rigid caster with 6 inch steel wheel no brake is a drop forged heavy duty caster built for demanding support on cargo containers, factory assembly tables, and heavy machinery. The AISI 1045 hot forged steel construction provides impact resistance, so the caster continues to perform under shock from loaded equipment movement. A full double ball bearing raceway lets the wheel roll smoothly under load, which supports easier positioning of heavy fixtures. The rigid type frame keeps travel in a straight line, helping guide long or heavy pieces where controlled direction is critical. With a 2000 lb load capacity, this caster handles substantial static and rolling loads on a single point, allowing fewer supports in many layouts. The 6 inch diameter, 3 inch tread width steel wheel offers a solid rolling surface, and the non-marking wheel characteristic helps protect floor surfaces during repeated moves.

Key Caster Details That Support Heavy Use

• The AISI 1045 hot forged steel construction provides more impact resistance, which helps the caster stand up to bumps and shocks from loaded cargo containers and machinery moves.
• The full double ball bearing raceway allows smoother wheel rotation under heavy loads, which reduces effort when positioning factory assembly tables and similar equipment.
• The zinc plated finish adds a protective layer to the caster body, which supports surface protection in typical shop and industrial environments.
• The 5/16 inch welded legs create a rigid structure around the wheel, which helps the caster maintain alignment when carrying up to its rated load.
• The 3/8 inch thick top plate provides a solid mounting interface, which helps distribute the 2000 lb capacity into the supporting frame or equipment base.
• The nut and bolt kingpin and 3/4 inch axle form a strong pivot and wheel connection, which supports reliable rolling performance over repeated cycles.
• The 6 inch diameter, 3 inch tread width steel wheel provides a broad contact area, which helps carry concentrated loads while the non-marking wheel feature supports cleaner floor appearance.

Plate Mount Caster Setup And Fit Details

This plate mount caster is part of the plate mounted casters category, so it uses a top plate rather than a stem for attachment. The 5-1/4 inch by 7-1/4 inch plate size defines the mounting footprint, which matters when matching to existing drilled patterns or designing new mounting pads. A 3/8 inch thick top plate offers a solid interface that spreads loads from the 2000 lb capacity into the supporting structure. The rigid caster type keeps the wheel fixed in direction, which suits straight-line guidance on jigs, heavy machinery bases, or cargo platforms. With a 6 inch diameter and 3 inch tread width steel wheel, this caster provides a substantial rolling surface height and width, which affects overall equipment height and track width in layouts.

Using This Drop Forged Heavy Duty Caster

Where This Rigid Caster Performs Best

This drop forged heavy duty caster is described for applications on cargo containers, factory assembly tables, and heavy machinery, so it is oriented toward industrial and shop environments where loads are concentrated. The AISI 1045 hot forged steel construction supports this role by providing impact resistance, which matters when containers or equipment are moved over thresholds or floor joints. A 2000 lb load capacity allows a single caster to carry substantial weight, so using multiple units can support large assemblies while maintaining predictable support points. The rigid configuration is suited to straight tracking under heavy frames, where directional control outweighs the need for swiveling. The non-marking steel wheel characteristic adds value on finished concrete or similar floors, helping maintain surface appearance as assemblies and containers are repositioned.

Details That Support Consistent Rolling Results

The full double ball bearing raceway is central to how this caster rolls, as it allows the wheel to turn smoothly under significant loads, which can reduce force required to start and continue movement of loaded tables and machinery. The 3/4 inch axle ties directly into this performance by providing a robust support for the steel wheel, which helps the wheel stay aligned under side loads. The 5/16 inch welded legs work with the axle to hold the wheel in position, which matters when the caster sees impacts from uneven floors or loading processes. A 3/8 inch thick top plate spreads the 2000 lb capacity into the mounting frame, which supports consistent performance without localized stress at the interface. The plate size of 5-1/4 inch by 7-1/4 inch gives a defined footprint for mounting hole layout, so equipment builders can design frames that fully use the caster capacity. The zinc plated finish supports the longevity of these mechanical features by adding surface protection in typical shop conditions, which helps keep moving parts functioning as intended over repeated use.

Common Questions About This DH Casters Model

Select This Caster For Heavy Duty Plate Mount Use

The DH Casters rigid caster with 6 inch steel wheel no brake combines a 2000 lb load capacity, AISI 1045 hot forged steel construction, and a 5-1/4 inch by 7-1/4 inch plate mount to support heavy duty movement of cargo containers, factory assembly tables, and machinery. The full double ball bearing raceway, 3/4 inch axle, and 5/16 inch welded legs work together to keep rolling performance consistent under demanding conditions. For projects that call for a rigid, non-marking wheel solution in the plate mounted casters class, this C-SHD630SSR model aligns its construction details with industrial load and movement requirements.