Olympus Lock, Inc Offset Cam 2" Length - 30596D

Combi-Cam Ultra Combination Cam Lock Function

Combi-Cam Ultra combination cam lock uses a 2 inch length, offset cam to control locker or cabinet access with a rotating latch, so installers can secure doors or drawers without running keyed cylinders through every opening. This Olympus Lock, Inc. offset cam is part number 30596D, which identifies it as the matched cam for Combi-Cam Ultra 3-dial rectangular combination cam and locker locks, helping shops standardize on a known component. The cam design works within magnetic key and keyless lock systems, so the locking action stays entirely at the combination body while the cam throws behind the frame. Because the cam is offset, it reaches behind a strike or frame that is not in line with the lock body centerline, which is common on locker doors and drawer fronts. This gives designers more freedom on panel layout while keeping a reliable latching point.

Key Working Details That Support Daily Use

• The 2 inch cam length spans from the lock spindle to the latching end, so it can reach behind typical locker frames and cabinet rails, creating positive engagement without extra brackets.
• The 1-1/2 offset in the cam shifts the latching surface away from the lock centerline, matching door and drawer layouts where the strike is stepped back from the front, which simplifies alignment.
• The cam is designed for the Combi-Cam Ultra 3-dial rectangular combination cam or locker lock, so the geometry matches that lock body for repeatable engagement and consistent feel when dialing and turning.
• This offset cam works in magnetic key and keyless lock applications, allowing the combination lock body to handle user interaction while the cam quietly performs the mechanical latching at the rear.
• All-metal construction on the Combi-Cam Ultra lock body pairs with this cam style, so the metal-to-metal interface at the latch resists wear from repeated opening cycles in busy locker settings.

Offset Cam Fit For Vertical Or Horizontal Mounts

The Combi-Cam Ultra combination cam lock with this 2 inch offset cam can be mounted vertically for doors or horizontally for drawers, so one hardware style covers both cabinet orientations on a project. When mounted vertically on doors, the offset cam swings behind the cabinet face or locker frame, bringing the latching edge into contact with a strike area that may sit deeper than the door thickness. In horizontal drawer mounting, the same 1-1/2 offset lets the cam reach down or up to a cabinet rail, helping drawers stay closed without adding extra catches. Because the offset and length are fixed, installers can plan lock hole locations knowing the throw arc will line up consistently across multiple door and drawer fronts.

Using This Olympus Lock Offset Cam On Projects

Where The 30596D Offset Cam Is Applied

The Olympus Lock, Inc. 30596D offset cam is intended for locker applications that use the Combi-Cam Ultra 3-dial rectangular combination cam or locker lock, so it fits well in school, fitness, or employee storage layouts built around keyless access. The 2 inch length makes it suitable for typical locker doors, cabinet doors, and many drawers where the distance from the lock body to the frame or strike falls within that reach. Because the same cam geometry supports both vertical mounting on doors and horizontal mounting on drawers, a shop can specify this offset cam across a full bank of mixed storage units while keeping consistent lock behavior. Its role within the magnetic key and keyless lock category means the end user interacts only with the combination dials and lock face, while this cam quietly handles the mechanical engagement behind the panel.

Why The Offset Cam Design Supports Consistent Results

The 1-1/2 offset on the 30596D cam shifts the latching surface away from the lock centerline, which helps installers solve misalignment between the drilled lock hole and the cabinet or locker frame they are catching behind. This offset lets the Combi-Cam Ultra combination cam lock latch behind stepped frames or recessed strikes without reworking door or drawer fronts, which is important when multiple units must look uniform. Because the cam is matched to the Combi-Cam Ultra 3-dial rectangular combination body, its rotation and stop positions are designed to provide a firm lock and clear release when the dialed code is correct, maintaining a predictable feel for users. The all-metal construction of the Combi-Cam Ultra lock working with this cam means the rotating spindle and cam interface stays rigid under repeated use, helping maintain alignment between the lock body, the cam throw, and the cabinet frame over time.

Common Questions About This Combi-Cam Ultra Cam

Select This Offset Cam For Keyless Locker Runs

The Olympus Lock, Inc. 30596D offset cam pairs with the Combi-Cam Ultra combination cam lock to give locksmiths and cabinet shops a defined 2 inch length and 1-1/2 offset geometry for keyless locker applications. By using this matched cam within magnetic key and keyless combination systems, projects gain predictable reach from the lock body to the strike on both doors and drawers. For runs of storage units that all rely on the Combi-Cam Ultra 3-dial rectangular body, this offset cam helps standardize the locking action across the installation.