Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice Progressa 15 inch undermount drawer slide delivers full-extension travel, integrated soft-close, and a 170 lb per pair capacity in a fully concealed runner that suits both face-frame and frameless cabinet construction.
A 15 inch drawer length suits base cabinet drawers in tighter runs, bathroom vanities, and utility cabinets where the drawer box is shallower than a standard kitchen pull-out. At 170 lb per pair, the Progressa handles drawer contents that would push a standard undermount past its rating — think solid-wood contents, stacked cookware, or a vanity drawer packed with hardware. The full-extension travel means nothing stays buried at the back, regardless of how tightly the drawer is loaded. Because the slide works in both face-frame and frameless cabinets, it fits production runs that mix construction styles without requiring a different SKU for each.
The Progressa is built from steel with a zinc finish — the functional standard for concealed runners that spend their service life beneath a drawer box. Zinc protects the steel through years of indoor use. The slide is engineered around drawer sides from 1/2 inch to 5/8 inch thick, and the box must be built to Salice's specification for the Progressa series: correct nominal length, box-width formula, bottom recess, rear notch, and drilling for the Salice series locking devices. Front locking devices for the Progressa are series-specific and are not interchangeable with those from other brands or Salice lines.
Cabinet shops running both face-frame and frameless work will appreciate not needing two separate undermount SKUs for the same nominal length. Designers and contractors specifying vanity drawers, bathroom cabinetry, or compact base units with real load demands get a heavy-capacity concealed runner in a 15 inch format that most standard undermount lines don't cover at 170 lb. Homeowners replacing worn or undersized slides in an existing 15 inch drawer will find the Progressa a step up in both capacity and closing behavior.
Per pair — one drawer uses one pair of slides, and the pair is rated 170 lb. This follows the standard undermount rating convention throughout the catalog.
Yes. In a face-frame cabinet, the slide's rear end needs support behind the face frame. Use the Salice Progressa-specific rear mounting brackets, sold separately. Brackets from other brands or series will not fit correctly.
The Progressa series uses Salice-specific front locking devices; confirm whether they are included with this SKU or need to be ordered separately before building your drawer box and scheduling installation.
No. This version is engineered for drawer sides from 1/2 inch to 5/8 inch thick. For 3/4 inch material, you need the appropriate Salice model sized for 19mm sides — the two versions are not interchangeable.
Yes. The Progressa is a full-extension slide, so the entire 15 inch drawer box extends to the cabinet face and the full interior is accessible.
When a 15 inch drawer needs the capacity and closing behavior of a premium concealed runner — and the flexibility to work in face-frame or frameless cabinets — the Salice Progressa delivers without compromise.
Sold In: 1 Set
