Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice F70 in the 30 inch length is a full-extension, soft-close undermount slide built for frameless cabinets and rated 170 lb per pair. That capacity puts it well above the standard 90 to 110 lb class, making it a capable choice for the deep, wide drawers in kitchen base cabinets, pots-and-pans pulls, and large utensil drawers that carry genuine weight.
A 30 inch undermount at 170 lb per pair covers applications that standard kitchen slides cannot. Deep base-cabinet drawers stacked with heavy cookware, wide utensil drawers in commercial-grade residential kitchens, and large organizational pull-outs in pantry bases all put sustained weight on a slide that gets cycled many times daily. The F70's capacity headroom means the hardware is not working near its limit on an ordinary loaded drawer, which translates to long-term smooth operation. Full extension at 30 inches brings the entire box out past the cabinet face, so nothing at the back of a deep drawer is out of reach.
Steel members with a zinc finish provide the structural backbone for the F70's 170 lb rating. The slide mounts concealed beneath the drawer box, so the zinc finish serves a functional role rather than a decorative one — it protects the steel through years of indoor use without being visible in normal operation. The soft-close damper is built into the slide body, keeping the mechanism clean and out of the way. Because this is the frameless version, the slide attaches directly to the flat cabinet side panel, which suits production shops working on the 32mm system as well as custom shops building frameless boxes one at a time.
Cabinet shops producing frameless kitchens with large base drawers are the primary audience here. A 30 inch soft-close undermount rated 170 lb is also a practical specification for designers calling out concealed hardware on oversized or heavily loaded pulls. Homeowners retrofitting deep base cabinets will find the side-thickness range — 1/2 to 3/4 inch — covers both standard shop-built plywood boxes and thicker hardwood drawer sides without choosing a different model. This is the frameless version only; face-frame construction requires the face-frame variant of the F70 line.
Most residential undermount slides are rated 90 to 110 lb per pair. The F70 line is engineered for a 170 lb per pair rating, which places it in heavy-duty undermount territory. That rating applies to this frameless, soft-close 30 inch model as sourced from Salice.
Yes. The integrated damper is part of the slide body and operates on the closing stroke regardless of slide length. A heavier or fuller drawer may have more momentum at longer lengths, which is one reason the F70's higher-capacity design pairs well with a 30 inch application.
Yes. Like all undermount slides, the F70 requires the drawer box to be built to Salice's published specification for the series: nominal 30 inch length, correct box width for the required side clearance, bottom recess, rear notch, and drilling for Salice's series-specific fixing clips. An off-spec box will not seat correctly on the slides.
Salice F70 front fixing clips are series-specific and may be sold separately from the slide pair. Confirm what is included when ordering and add the correct Salice F70 clips to your order if they are not in the box.
This is the frameless version and is not designed for face-frame construction. For face-frame cabinets, select the face-frame variant of the F70, which accommodates the rear mounting bracket requirement that face-frame installs need.
When the drawer is large, the contents are heavy, and the finish matters, the Salice F70 30 inch soft-close undermount delivers the capacity and the concealment that the job requires.
Sold In: 1 Set
