Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice Progressa is a 24 inch full-extension undermount drawer slide built for frameless cabinets and demanding applications. With a 170 lb per pair rating and an integrated soft-close mechanism, it handles the loads that standard undermounts cannot while keeping all hardware concealed beneath the drawer box.
Most undermount slides are rated in the 90 to 110 lb range, which covers everyday kitchen and bath drawers without difficulty. The Progressa steps beyond that bracket. At 170 lb per pair, it is the right call for a deep pots-and-pans pull-out loaded with cast iron, a waste-bin drawer carrying dual bins, or an oversized utility drawer in a shop or laundry cabinet. Anywhere the contents are dense, bulky, or simply heavy, this slide keeps the drawer moving smoothly without pushing past its rating. Full extension ensures nothing stays buried in the back — the entire box clears the opening so the last item on the bottom is as reachable as the first.
The Progressa is a steel-bodied slide with a zinc finish — the same corrosion-resistant plating standard across commercial-grade drawer hardware for indoor environments. Because the slide mounts beneath the drawer box, the finish is never the visual focus; it exists to protect the steel through years of daily cycles. The drawer box must be built to Salice's specification for the Progressa series: nominal 24 inch length, box width calculated for the required side clearance, bottom recess, rear notch, and drilling for Salice's series-specific front locking devices. An off-spec box will not seat correctly on these runners.
Cabinet shops producing frameless kitchens and utility cabinetry that regularly spec high-capacity drawers will find the Progressa a reliable choice for the runs where a standard undermount is undersized. Designers specifying handle-less frameless kitchens get the clean look of a concealed slide with the capacity to back it up. Contractors and installers sourcing for a single heavy-duty drawer can order with confidence knowing the 170 lb rating covers the worst-case load. This slide is a frameless-cabinet product — for face-frame applications, look to the face-frame version of the Progressa line rather than adding rear brackets to this model.
Per pair, as load ratings are stated throughout this category. One pair of Progressa slides carries up to 170 lb — do not double that number by counting each slide separately.
This is the frameless version of the Progressa and is designed to mount directly to the flat interior side panel of a frameless cabinet. For face-frame cabinets, use the face-frame configuration of the line instead.
No. This version is engineered for 1/2 to 5/8 inch drawer sides. For 3/4 inch sides, you need the 19mm-compatible model in the Progressa line, not this SKU.
Salice front locking clips are series-specific and may be sold separately. Confirm what ships with this SKU before placing a large order, and do not substitute locking devices from other brands or slide series.
The integrated damper is tuned for the Progressa's rated capacity range. At loads well within the 170 lb rating, the soft-close engages in the last inch of travel and brings the drawer to a controlled stop — heavier drawers do not override the damper the way they can on slides with lighter damping.
When the drawer in question carries more weight than a standard undermount is built for, the Salice Progressa 24 inch slide gives you a concealed, soft-close solution rated for the load — without compromising on full extension or the clean look of a hardware-free interior.
Sold In: 1 Set
