Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice F70 in the 18 inch length is a concealed, full-extension undermount drawer slide with integrated soft-close, rated 170 lb per pair and built for frameless cabinets. It is the right slide when a standard 90 to 100 lb undermount is not enough drawer for the job.
Most concealed slides are sized for everyday kitchen drawers. This one is chosen when the contents tip the scale well past the standard range: a double-bin pull-out, a pots-and-pans drawer loaded with cast iron, a utility base carrying power tools, or a shop cabinet that needs concealed hardware with genuine working capacity. At 170 lb per pair and full extension, the F70 brings the entire drawer box out to the face without compromising on the smooth, damped close that modern frameless cabinetry expects. It is also a practical choice for specifiers who want to run one high-capacity slide family across an entire project rather than mixing capacity classes by drawer.
The F70 is built from steel with a zinc finish — a standard, proven combination for indoor cabinet hardware that prioritizes structural integrity over decoration. Because the slide mounts beneath the drawer box and stays fully hidden when the drawer is open, the finish does its job unseen. The soft-close damper is integrated into the slide body, so there are no add-on clips or separate damper units to source or install. The wide side-thickness range, 1/2 to 3/4 inch, means the slide works with both typical 5/8 inch dovetailed boxes and thicker 3/4 inch plywood construction without switching to a different model.
Cabinet shops and installers working in frameless construction who regularly encounter drawers that outlast standard-capacity slides will find the F70 a reliable default for high-load applications. It is equally useful for designers specifying base cabinets that will carry heavy contents, and for homeowners planning a kitchen or utility room renovation who want a slide that does not need to be revisited when the drawer is fully loaded. The 18 inch nominal length suits standard base cabinet drawer boxes; build the drawer box to Salice's published specification for the F70 series, including the correct box width, bottom recess, rear notch, and drilling for the Salice series-specific front locking devices.
Yes. The 170 lb capacity is rated per pair, and the slide is sold as a complete pair — one left-hand and one right-hand member — for one drawer installation.
This SKU is the frameless version of the F70, designed to mount directly to the cabinet side panel. A face-frame installation requires a different configuration of the line. Check available F70 variants for a face-frame-compatible model before ordering for traditional framed cabinetry.
Salice F70 front locking devices are series-specific and may be sold separately. Confirm what ships with this SKU before placing a production order, and do not substitute locking devices from other slide brands or series — they are not interchangeable.
No. This is the soft-close model — the damper controls the close. Push-to-open is a separate F70 model for handle-less fronts. The two functions are not combined in this version.
The drawer box must be built to Salice's published F70 specification: nominal 18 inch length, the correct width formula for the slide's side clearance, bottom recess, rear notch, and locking-device drilling. An off-spec box will not seat correctly on the slides.
When the drawer needs to carry real weight, close quietly, and stay hidden, the 18 inch Salice F70 soft-close undermount is the slide that covers all three — match the box to the spec, confirm your locking device needs, and put one pair under every drawer that demands it.
Sold In: 1 Set