Formica 6126-58 Sheer Fabric laminate is a Grade 12 postforming laminate sheet designed for interior applications where forming is desired for decorative or functional purposes, so it suits curved or wrapped design elements. The 36"x144" size provides a continuous run for longer counters or wall sections, which helps reduce seam layout on commercial jobs. The .035" (0.9mm) thickness is part of Formica Grade 12, so it is engineered for postforming on suitable commercial postforming equipment. This sheet is part of the Formica Laminate Fabric Collection with linen-inspired visuals, so it supports commercial design that seeks warmth and effortless elegance along with durable, easily cleaned surfaces. The 58 matte finish imparts a warm, pleasing effect that enhances the beauty of color and produces greater clarity and depth, which helps projects achieve a soft, low-glare look for both horizontal and vertical interior applications.
This Grade 12 postforming laminate is described as postformable to permit bending on suitable commercial postforming equipment, which supports shop workflows that rely on heated forming for clean edges. The outside radius to 1/2" (12.7mm) and cove radius to 3/16" (4.8mm) provide defined forming limits, so designers and fabricators can plan edge and cove geometry within those parameters. The optimum postforming temperature of 325F (163C) describes the thermal range where forming should occur, which supports consistent results from run to run when heating equipment is set accordingly. The matte 58 finish is recommended for horizontal and vertical interior applications, allowing one surface choice across worktops, cabinetry faces, and interior panels for visual continuity on commercial projects.
The Formica Sheer Fabric laminate is part of the Formica Laminate Fabric Collection with four new linen-inspired visuals, which positions it as a palette for commercial design that seeks warmth and effortless elegance in interior spaces. Its recommendation for horizontal and vertical interior applications means it can serve on work surfaces, casework, and wall cladding within the same project, simplifying material coordination. The durable, easily cleaned surface described by Formica supports commercial environments where regular wipe-downs are part of daily use, helping maintain the intended fabric-inspired appearance. The 36"x144" sheet size gives flexibility for longer runs such as reception desks or wall panels, reducing the number of joints that need to be managed in the design and fabrication stages.
This laminate is identified as Grade 12 - postforming with .035" (0.9mm) thickness, so its construction aligns with typical commercial postforming practices that rely on controlled heating and bending. Being postformable to permit bending on suitable commercial postforming equipment means it is designed for those forming workflows rather than only flat bonding, which can streamline edge finishing where integral build-ups are preferred. The specified outside radius to 1/2" (12.7mm) and cove radius to 3/16" (4.8mm) give concrete limits for forming setups, helping reduce trial-and-error when setting up forms and templates. The optimum postforming temperature of 325F (163C) provides a clear heating target, which helps maintain consistent forming behavior across different jobs and crews. In addition, the 58 matte finish imparts a warm, pleasing effect that enhances the beauty of color and produces greater clarity and depth, supporting projects that prioritize both appearance and functional interior surfacing.
Formica 6126-58 Sheer Fabric laminate is supplied as a 36"x144" sheet, which supports longer runs on counters or wall panels with fewer seams to manage in layout.
The laminate is Grade 12 postforming at .035" (0.9mm) thickness, so it is designed for bending on suitable commercial postforming equipment in interior applications.
This Formica Sheer Fabric laminate is rated for an outside radius to 1/2" (12.7mm), allowing relatively tight curved edges on formed countertops and profiles.
The product supports a cove radius to 3/16" (4.8mm), making it suitable for small internal curves such as coved backsplashes within interior projects.
The Formica 6126-58 Sheer Fabric laminate lists an optimum postforming temperature of 325F (163C), guiding heating setup for consistent forming performance.
The 58 matte finish is recommended for horizontal and vertical interior applications, so it can be used on worktops, casework fronts, and interior wall panels.
This Formica 6126-58 Sheer Fabric laminate combines a linen-inspired visual with Grade 12 postforming performance, so it suits commercial interiors needing both design character and formed edges. The 36"x144" sheet size, .035" (0.9mm) construction, and defined forming limits to 1/2" outside radius and 3/16" cove radius support predictable shop setups. The 58 matte finish, recommended for horizontal and vertical interior applications, allows one coordinated surface across worktops, casework, and wall panels. Use this laminate when interior projects call for warm, fabric-inspired visuals along with durable, easily cleaned surfaces and established Formica postforming parameters.
Sold In: 1 Sheet