Formica 6126-58 Sheer Fabric laminate gives you a linen-inspired visual on a durable laminate surface, so commercial interiors gain warmth and effortless elegance while still using a hard-wearing work surface. The 48 inch by 96 inch sheet size provides a practical format for many commercial casework and interior projects, which helps layout and fabrication on standard equipment. This product is part of the 2023 Formica Laminate Fabric Collection with four linen-inspired visuals, so it fits designs that call for a fabric look with coordinated options. The laminate is identified as SHEER FABRIC 12 MATTE, tying the Sheer Fabric visual to a Grade 12 postforming construction for forming applications. As a laminate in the Formica HPL category, it serves as a high pressure decorative surface for interior use where both appearance and cleanability matter.
This Grade 12 postforming laminate is postformable to permit bending on suitable commercial postforming equipment, which lets shops fabricate formed edges and coves as part of their normal workflow. The outside radius capability down to 1/2 inch and cove radius capability down to 3/16 inch give clear forming limits, so bending setups can be tuned to stay within the laminate design window. The optimum postforming temperature of 325 F (163 C) defines a heat target for forming cycles, supporting consistent results across runs. The 0.035 inch (0.9mm) thickness works with standard high pressure laminate fabrication methods, which supports trimming, seam work, and bonding steps already familiar to laminate fabricators.
This product is identified as Formica 6126-58 Sheer Fabric Laminate Postform Grade in a 48 inch by 96 inch size, so it suits interior projects that use standard sheet layouts for counters, worktops, or vertical panels. Being part of the Formica Laminate Fabric Collection with four linen-inspired visuals, it supports commercial design schemes that call for textile-like surfaces with coordinated options. The laminate is recommended for horizontal and vertical interior applications, which means the same Sheer Fabric visual can run across desks, tabletops, wall panels, and cabinetry faces for visual continuity. As a laminate in the Formica HPL category, it functions as a decorative surfacing layer in woodworking and interior fit-out work where color, pattern, and cleanability drive material selection.
The Grade 12 postforming construction at about 0.035 inch (0.9mm) thickness is designed so the laminate can be postformed on suitable commercial equipment, which supports repeatable wrapped edges and coves when production volumes are high. The documented outside radius limit of 1/2 inch (12.7mm) and cove radius limit of 3/16 inch (4.8mm) define the bend geometry, so fabrication setups can be built around specific radius templates rather than trial-and-error forming. The optimum postforming temperature of 325 F (163 C) gives a concrete process parameter, helping shops align heater settings and dwell time to the laminate design. The 58 matte finish is stated to enhance color clarity and depth while providing a warm, pleasing effect, which helps the Sheer Fabric pattern remain visually consistent across horizontal and vertical interior applications. The notation that Grade 12 is recommended for light-duty horizontal applications when used with a gloss finish clarifies how this construction is positioned when a gloss surface is specified.
The Formica 6126-58 Sheer Fabric laminate sheet is 48 inches by 96 inches, which matches many commercial casework and countertop layouts in interior projects.
The laminate thickness is approximately 0.035 inch (0.9mm), so it behaves like standard high pressure laminate during bonding, trimming, and edge work.
This Grade 12 laminate can be postformed to an outside radius down to 1/2 inch (12.7mm) and a cove radius down to 3/16 inch (4.8mm) for formed edges and coves.
The optimum postforming temperature is 325 F (163 C), giving a clear target for setting up commercial postforming equipment to achieve consistent bends.
The laminate is recommended for horizontal and vertical interior applications, so it can be used on work surfaces and wall or cabinet faces in the same project.
This product uses Formica 58 matte finish, described as providing a warm, pleasing effect that enhances color clarity and depth on the Sheer Fabric pattern.
Formica 6126-58 Sheer Fabric laminate combines a linen-inspired visual with a Grade 12 postformable construction, so commercial interiors can carry a fabric look on formed edges and flat runs. The 48 inch by 96 inch sheet and approximately 0.035 inch (0.9mm) thickness fit standard laminate fabrication workflows without changing tools or methods. With defined radius capabilities and an optimum postforming temperature of 325 F (163 C), this Formica matte finish laminate offers clear parameters for bending and bonding in horizontal and vertical interior applications.
Sold In: 1 Sheet