Formica 6126-58 Sheer Fabric laminate gives you a fabric-inspired visual from the 2023 Formica Laminate Fabric Collection, so you can build commercial interiors that target warmth and effortless elegance while still using a hard, durable surfacing material. This product is a laminate in Grade 12 postforming at .035 inch (0.9mm) thickness, which means it is engineered to be formed around edges and profiles on suitable commercial postforming equipment rather than staying flat only. The 30 inch by 96 inch size serves typical counter, worktop, or panel runs where a single sheet span is useful for layout efficiency. As part of the Formica Laminate Fabric Collection, this colorway coordinates with other linen-inspired visuals, which matters when you want a consistent design language across multiple surfaces in the same project.
This Grade 12 postforming laminate is postformable to permit bending on suitable commercial postforming equipment, so it is intended for processes where heat and forming bars are used rather than cold bending. The optimum postforming temperature of 325 F (163 C) gives a defined heat level for shop setups targeting repeatable forming around edges. This sheet supports outside radii to 1/2 inch (12.7mm) and cove radii to 3/16 inch (4.8mm), which defines how tight you can run your profiles without overstressing the laminate. The 58 matte finish is recommended for horizontal and vertical interior applications, so it suits worktops, casework faces, or other interior surfaces that benefit from a low-sheen appearance. The finish is available on all solid colors, patterns, and woodgrains, which simplifies standardizing a finish across mixed surface designs.
This Formica Corporation laminate is part of the Formica Laminate Fabric Collection, described as a preferred palette for commercial design that seeks warmth and effortless elegance along with durable, easily cleaned surfaces, so it is aimed at interior spaces that need soft-looking visuals backed by hard-working surfaces. Recommended use in horizontal and vertical interior applications means the same Sheer Fabric visual can run across counters, tabletops, and wall or cabinet faces, helping align surfaces in reception areas, offices, or other commercial interiors. The Grade 12 - postforming - .035 inch (0.9mm) thickness is designed for interior applications where forming is desired for decorative or functional purposes, allowing edges, wraps, and coves to follow a consistent visual instead of breaking at field seams. Because the 58 matte finish enhances the beauty of color and produces greater clarity and depth, finished projects show the fabric-inspired pattern with definition that supports close-up viewing in high-use spaces.
The Grade 12 postforming classification signals that this laminate is engineered for forming conditions rather than only flat bonding, which matters when setting up jigs, line speeds, and heat zones for commercial postforming equipment. Optimum postforming temperature specified at 325 F (163 C) provides a numeric target for heating cycles, so operators can tune dwell time and heater distance for consistent plasticity during wrapping. The stated outside radius to 1/2 inch (12.7mm) and cove radius to 3/16 inch (4.8mm) define safe forming geometry, so designers and fabricators can choose edge and cove tools that stay within these limits for reduced risk of surface stress. The laminate is described as postformable to permit bending on suitable commercial postforming equipment and to be used whenever forming is desired for decorative or functional purposes in interior applications, which ties its engineering directly to wrapped edges, waterfall fronts, and integral backsplashes. The 58 matte finish, noted as imparting a warm, pleasing effect that enhances color with greater clarity and depth, supports finished parts that look consistent across formed and flat areas.
Formica 6126-58 Sheer Fabric laminate is specified at 30 inches by 96 inches, which suits many counter runs or casework components that benefit from a single-span sheet.
This product is Grade 12 postforming at .035 inch, or 0.9mm, so it is built for forming applications where you need a thinner, flexible laminate for wrapped profiles.
The laminate supports an outside radius to 1/2 inch and a cove radius to 3/16 inch, which defines the minimum curvature for design and tooling without over-stressing the sheet.
The Grade 12 postforming laminate lists an optimum postforming temperature of 325 F, or 163 C, providing a clear target when setting up commercial postforming equipment.
The 58 matte finish is recommended for horizontal and vertical interior applications, so it works for counters, worktops, and vertical panels using the same surface finish.
Sheer Fabric is part of the Formica Laminate Fabric Collection with four new linen-inspired visuals, supporting commercial designs that call for a soft, fabric-like appearance.
Formica 6126-58 Sheer Fabric laminate in Grade 12 postforming gives you a 30 inch by 96 inch sheet built for forming in interior applications, allowing wrapped edges and coves that maintain a consistent Sheer Fabric visual. The optimum postforming temperature of 325 F and defined outside and cove radii provide concrete parameters for commercial postforming equipment setups. The 58 matte finish delivers a warm, pleasing effect that enhances color clarity and depth on both horizontal and vertical interior surfaces. For commercial design work that needs linen-inspired visuals from the Formica Laminate Fabric Collection with durable, easily cleaned surfaces, this laminate offers a coordinated, postformable option.
Sold In: 1 Sheet