Formica 6126-58 Sheer Fabric laminate gives you a fabric-inspired visual in a hard-wearing surfacing material, so you can deliver commercial interiors that look warm and controlled while still using a standard laminate workflow. This sheet is a Grade 12 postforming laminate at 0.035 inches, or 0.9mm thickness, which provides the flexibility needed for forming while maintaining a stable surface for day-to-day use. The 60 inch by 144 inch size covers larger runs of counters or wall panels in a single sheet, which reduces seam layout work on long installations. The design is part of the Formica Laminate Fabric Collection with linen-inspired visuals, so it supports projects that call for a fabric look while still relying on laminate fabrication tools. The 58 matte finish provides a warm, low-sheen appearance that helps hide minor handling marks in typical interior environments.
This Formica Sheer Fabric postforming laminate is engineered to be postformable, so it can be bent on suitable commercial postforming equipment rather than cut and edged at every change of direction. The Grade 12 construction at 0.035 inches (0.9mm) thickness is intended for forming whenever decorative or functional shaping is needed in interior applications, which fits typical tops, fascias, and wrapped panels. An outside radius down to 1/2 inch (12.7mm) and a cove radius down to 3/16 inch (4.8mm) give defined forming limits that guide tooling setup for fronts, returns, and coved splashes. The optimum postforming temperature of 325F (163C) provides a clear process target, helping fabricators tune heat zones and dwell times for repeatable bends on this specific sheet.
This laminate is described as part of the Formica Laminate Fabric Collection, which is presented as a palette for commercial design that seeks warmth and effortless elegance, so it aligns well with reception areas, hospitality fixtures, or retail fronts that need a softer visual. The linen-inspired Sheer Fabric appearance lets you echo textile tones on hard surfaces, which helps tie casework into upholstered pieces or wall treatments without introducing a different material class. Recommended use on horizontal and vertical interior applications lets the same 6126-58 sheet run across worktops, desks, and wall cladding, which can simplify design coordination on multi-surface buildouts. Because it is postform grade, the sheet supports curved fronts and coved backsplashes, allowing continuous runs of the Sheer Fabric look instead of breaking it with separate edging materials.
The 58 matte finish is described as imparting a warm, pleasing effect that enhances the beauty of color and produces greater clarity and depth, so the fabric-inspired pattern reads with more visual texture without the glare associated with higher-sheen laminates. This finish is recommended for both horizontal and vertical interior applications, which means the surface appearance remains consistent from worktops to vertical panels throughout a room. Grade 12 is noted as recommended for light-duty horizontal applications when used with a gloss finish, which clarifies that this postforming grade is tied to specific horizontal use conditions when a higher sheen is selected. The defined outside and cove radius capabilities, together with the optimum postforming temperature of 325F (163C), give shop teams concrete forming parameters, which supports predictable bending results and helps align Sheer Fabric parts with other Formica postforming jobs that follow the same temperature and radius targets.
Formica 6126-58 Sheer Fabric laminate is supplied as a 60 inch by 144 inch sheet, so it spans long runs of tops or panels with fewer joints in typical commercial casework layouts.
This Sheer Fabric laminate is Grade 12 postforming at 0.035 inches, or 0.9mm thickness, giving a balance of flexibility for forming and sufficient body for interior surfacing work.
The Formica Sheer Fabric sheet is postformable to an outside radius of 1/2 inch and a cove radius of 3/16 inch, allowing curved fronts and coved splashes on suitable commercial postforming equipment.
The laminate has an optimum postforming temperature of 325F, or 163C, which provides a defined heat target when setting up equipment for consistent bends on this grade.
The 58 matte finish is recommended for horizontal and vertical interior applications, so it can be applied across worktops, fronts, and wall panels while keeping the same low-sheen look.
The Formica Laminate Fabric Collection offers linen-inspired visuals for commercial design, giving hard surfaces a fabric-like appearance that supports interiors aiming for warmth and effortless elegance.
Formica 6126-58 Sheer Fabric laminate combines a fabric-inspired pattern, Grade 12 postforming construction, and a 58 matte finish in a 60 inch by 144 inch sheet, giving you defined forming parameters and a warm visual for horizontal and vertical interior work. The specified outside and cove radius limits, thickness of 0.035 inches (0.9mm), and optimum postforming temperature of 325F (163C) provide clear working data for integrating this sheet into existing Formica-based fabrication setups. For commercial projects that call for the Formica Fabric Collection look on multiple surfaces, this Sheer Fabric option offers a consistent identity from tops through vertical panels.
Sold In: 1 Sheet