Knape and Vogt 15" Soft-Close Full Extension Undermount Drawer Slides, Roller Bearing Zinc - KVGS-2070AB 15

Knape And Vogt 15 Inch Undermount Drawer Slides

Knape and Vogt 15 inch undermount drawer slides use the GSlide GS2070 design to support drawers where a concealed slide is preferred, so the hardware stays out of sight while the drawer operates along the full length of the 15 inch track. This undermount drawer slide is in the Knape and Vogt GSlide GS2070 family, which defines it as a 75 lb class full extension slide, giving cabinet builders a specific capacity and travel rating to plan around when sizing typical residential or light commercial drawers. The slide uses a roller bearing type action, so the drawer moves along guided rollers that control motion over the full extension travel. A telescopic action is specified, which means nested members extend in stages so the drawer can travel fully out to the 15 inch length while remaining supported along the track length.

Key Slide Details For Cabinet Projects

• The GSlide GS2070 undermount drawer slide is rated as a 75 lb class full extension slide, so drawers can be designed within that load class while still achieving full travel to the back of a 15 inch drawer box.
• This undermount slide is designed for drawer box thickness from 1/2 inch to 5/8 inch, giving builders a defined material range that matches common cabinet side stock when laying out drawer box construction.
• The slide is specified with a disconnect lever, so the drawer can be separated from the slide members for fitting, adjustment, or finishing work and then re-engaged on the same track.
• A 32 mm hole pattern is provided on the slide, so installers working with 32 mm cabinet systems can align the slide with predrilled case holes during layout and drilling operations.
• Face-frame mounting is supported, so this undermount slide can be attached in cabinet boxes that use a face frame construction style rather than only frameless cases.
• The finish is zinc, so the metal slide members present a uniform coated surface that resists normal handling environments in cabinetry during installation and everyday use.

Undermount Slide Installation And Fit Details

This Knape and Vogt undermount drawer slide is identified as length 15 inch, so it is suited to drawer boxes built around that depth where full extension travel to the back is required. The slide height is listed as 1-7/8 inch, giving installers a fixed vertical dimension to account for when positioning the slide under the drawer box and inside the cabinet case. The undermount slide configuration means the hardware mounts beneath the drawer, so alignment depends on accurate positioning to the drawer sides that fall within the 1/2 inch to 5/8 inch thickness range. A handed slide configuration is specified, so there is a distinct member for each side of the drawer, which affects how left and right components are oriented during mounting and adjustment.

Using GSlide GS2070 Slides In Drawer Builds

Where These Undermount Drawer Slides Fit Best

The Knape and Vogt GSlide GS2070 undermount drawer slides are classified under drawer slides and slides, undermount, so they are aimed at applications where a concealed undermount slide is preferred over a side-mount configuration. With a 15 inch length and full extension travel, these slides serve drawer boxes that need to open to their full internal depth so contents at the back of the 15 inch drawer can be accessed along the rail length. The 75 lb class rating defines the load environment they are designed to handle, so drawers for typical household or light-duty storage fall within the service range defined by this class rating. The slide configuration is undermount and handed, so each side of the drawer rides on its own track beneath the box rather than on exposed side-mounted rails.

The drawer box thickness range of 1/2 inch to 5/8 inch means these undermount slides fit common plywood or solid stock sizes used in many cabinet shops, keeping the undermount hardware aligned with standard drawer side materials. The presence of a 32 mm hole pattern supports cabinets built on a 32 mm system, which simplifies casework when rows of system holes are already drilled for hardware placement. Face-frame mounting capability means these slides can be used in face-frame cabinet construction, giving builders flexibility when working across both frameless and framed box designs within the same project. The zinc finish on the metal members provides a consistent surface during installation and day-to-day drawer operation in typical interior cabinetry environments.

Details That Support Repeatable Drawer Results

The GSlide GS2070 designation identifies this slide as part of a defined Knape and Vogt product class, so cabinet makers can reference that model when matching existing installations or planning multiple cabinets that require the same undermount slide behavior. Full extension travel and telescopic action work together so the drawer can be pulled fully forward along the 15 inch rail while still being supported by nested slide members, which helps maintain alignment under the 75 lb class loading during normal use. The roller bearing slide type means movement is guided by rollers, so the drawer rides along defined paths that help maintain consistent operation over the length of the travel. A disconnect lever allows the drawer to be separated from the slide members, which can streamline finishing, transport inside a jobsite, or bench adjustments before the drawer is reinstalled on the same 15 inch undermount tracks.

The slide configuration is described as handed, so left and right members are distinct, which helps maintain consistent side-to-side geometry once each member is mounted to its respective side under the drawer. Slide height of 1-7/8 inch is a fixed dimension that can be factored into clearances under the drawer bottom and within the case opening, helping installers maintain consistent reveals above and below the drawer box. The defined drawer box thickness range of 1/2 inch to 5/8 inch provides a known interface width for the undermount engagement, which supports repeatable fit when building multiple drawers to a common specification. Face-frame mounting support and the 32 mm hole pattern together give cabinet shops working in mixed construction styles a common undermount slide that adapts to standard drilling and frame layouts across different cabinet runs.

Common Questions About KVGS-2070AB 15 Slides

Selecting This 15 Inch GSlide For Your Work

The Knape and Vogt 15 inch undermount drawer slides with the GSlide GS2070 designation combine a 75 lb class full extension rating, 1-7/8 inch slide height, and drawer box thickness range of 1/2 inch to 5/8 inch, giving cabinet builders defined parameters for drawer design. With undermount, handed configuration, face-frame mounting capability, and a 32 mm hole pattern, this KVGS-2070AB 15 model provides a consistent hardware choice when planning new drawer runs or aligning with existing GSlide GS2070 installations.