Knape and Vogt 18" Soft-Close Full Extension Undermount Drawer Slides, Roller Bearing Zinc - KVGS-2070AB 18

Knape And Vogt Undermount Drawer Slides For Smooth Access

Knape and Vogt undermount drawer slides in the GSlide GS2070 series provide a concealed 18 inch full extension runner for drawer boxes. The 75 lb load class supports typical cabinet storage without overbuilding, so casework can stay efficient while still handling everyday contents. The telescopic action keeps movement controlled along the entire stroke, which helps drawers track consistently in use. A soft-close action is identified in the product name, signaling a controlled closing motion that helps drawers settle without slamming against the cabinet front. The roller bearing type supports the moving members along the slide path, which provides guided travel compared to friction-only runners. An undermount configuration leaves the sides of the drawer clean, which helps when builders want uninterrupted drawer box sides for aesthetics or for access to internal organizers. The zinc finish covers the slide members, which provides a uniform metallic appearance that coordinates with typical cabinet hardware components.

Key Drawer Slide Details That Support Build Quality

• The GSlide GS2070 undermount drawer slides are identified as a 75 lb class full extension slide, which defines a load and travel capability that suits many residential and light commercial drawer applications.
• These drawer slides are for drawer box thickness of 1/2 inch to 5/8 inch, which gives builders a defined side material range when sizing drawer components for proper engagement with the undermount hardware.
• The slide length is 18 inches within a series that lists 9, 12, 15, 18, and 21 inch lengths, which lets shops standardize on one slide family across different drawer depths when laying out cabinet runs.
• The face-frame mounting capability is identified as yes, which matters when fitting the slides into framed cabinets where a front frame defines the opening rather than a frameless carcase side.
• The slide configuration is identified as handed, which means left and right parts are distinct, helping installers orient each member correctly relative to the drawer and cabinet during layout.
• The hole pattern uses 32 mm spacing, which aligns with common system boring setups, allowing faster, repeatable mounting in shops that drill cabinet parts using the 32 mm construction system.

Undermount Slide Fit, Mounting, And Drawer Box Setup

The undermount drawer slides are specified for drawer box thickness of 1/2 inch to 5/8 inch, so side panels within this range align with the slide engagement hardware and support proper seating of the drawer on the runners. The face-frame mounting designation means the slide layout works with framed cabinet fronts, which helps when retrofitting or building traditional North American face-frame cabinets. The full extension travel allows drawers to move completely out of the opening to the rated stroke, so the back of the drawer becomes accessible during daily use or during fitting. The telescopic action manages the nested members of the slide as they travel, helping the drawer stay supported across the entire extension instead of relying on short bearing points.

Where These GSlide GS2070 Slides Work Best

Drawer Applications In Cabinet And Furniture Runs

The product is classified under undermount drawer slides, placing it in applications where the slide mounts beneath the drawer box rather than on the sides. This configuration pairs well with cabinetry where a clean drawer side is desirable, because hardware is kept out of sight when the drawer is open. The 18 inch length aligns with drawers built around that depth, allowing planners to coordinate cabinet carcase depth with the working stroke of the slide. The 75 lb load class supports many storage tasks in kitchens, baths, and similar casework where contents fall within that range, keeping the slide operating within its intended performance envelope. As a roller bearing type, the slide relies on rolling elements along its telescopic members, which helps maintain predictable motion under load compared to simple wood-on-metal contact.

Details That Support Repeatable Installation And Function

The 32 mm hole pattern ties directly into system-bored cabinet parts using the same spacing, so fabricators can mount the slides by referencing pre-drilled rows rather than laying out every fastener position individually. The handed slide configuration distinguishes left and right members, which simplifies installation sequences because each side of the cabinet receives its dedicated part. Face-frame mounting capability lets installers tie the slide geometry to the cabinet frame, supporting alignment between the drawer front and the face frame opening. Full extension travel allows drawers to clear the cabinet front to the rated stroke, which improves visibility of contents and helps during adjustments. The zinc finish provides a consistent metal surface on all slide members, which coordinates visually with other zinc-plated cabinet components. The presence of a disconnect lever described in the web text gives a defined method to separate the drawer from the slide members, which can simplify drawer removal during finishing stages or later service.

Common Questions About KVGS-2070AB 18 Drawer Slides

Selecting These Slides For Your Next Cabinet Run

The Knape and Vogt 18 inch soft-close full extension undermount drawer slides in the GSlide GS2070 series combine a 75 lb class rating, roller bearing telescopic action, and face-frame mounting capability. The defined drawer box thickness range of 1/2 inch to 5/8 inch and the 32 mm hole pattern help shops align design, machining, and installation steps. For projects built around undermount hardware with an 18 inch stroke, this KVGS-2070AB 18 model offers a consistent specification that can be applied across similar drawer openings.